CERTIFICATION OF ENROLLMENT

 

                        SENATE BILL 5103

 

 

                    Chapter 19, Laws of 1991

 

 

                        52nd Legislature

                      1991 Regular Session

 

 

              ENGINEER‑-REGISTRATION REQUIREMENTS

 

 

                    EFFECTIVE DATE:  7/28/91

 

 


Passed by the Senate March 12, 1991

  Yeas 41   Nays 0

 

 

           JOEL PRITCHARD          

President of the Senate

 

Passed by the House April 8, 1991

  Yeas 95   Nays 0

 

 

              JOE KING             

Speaker of the

       House of Representatives

 

 

Approved April 17, 1991

 

 

 

 

 

 

 

           BOOTH GARDNER           

Governor of the State of Washington


       CERTIFICATE

 

I, Gordon Golob, Secretary of the Senate of the State of Washington, do hereby certify that the attached is SENATE BILL 5103 as passed by the Senate and the House of Representatives on the dates hereon set forth.

 

 

           GORDON A. GOLOB            Secretary

 

 

 

                                     FILED         

 

 

 

                April 17, 1991 - 3:20 p.m.

 

 

 

                        Secretary of State   

                       State of Washington  



 


                  _______________________________________________

 

                                 SENATE BILL 5103

                  _______________________________________________

 

                     Passed Legislature - 1991 Regular Session

 

 

State of Washington              52nd Legislature             1991 Regular Session

 

By Senators Craswell, Nelson, McMullen and Matson; by request of Department of Licensing.Read first time January 21, 1991.  Referred to Committee on Commerce & Labor.Concerning the registration of engineers.


     AN ACT Relating to registration of engineers; and amending RCW 18.43.020, 18.43.040, 18.43.050, 18.43.060, 18.43.070, 18.43.130, and 18.43.100.

 

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

 

     Sec. 1.  RCW 18.43.020 and 1947 c 283 s 2 are each amended to read as follows:

     Engineer:  The term "engineer" as used in this chapter shall mean a professional engineer as hereinafter defined.

     Professional engineer:  The term "professional engineer" within the meaning and intent of this chapter, shall mean a person who, by reason of his or her special knowledge of the mathematical and physical sciences and the principles and methods of engineering analysis and design, acquired by professional education and practical experience, is qualified to practice engineering as hereinafter defined, as attested by his or her legal registration as a professional engineer.

     Engineer-in-training:  The term "engineer-in-training" as used in this chapter shall mean a candidate for registration as a professional engineer who is a graduate in an approved engineering curriculum of four years or more from a school or college approved by the board as of satisfactory standing, or who has had four years or more of experience in engineering work of a character satisfactory to the board; and who, in addition, has successfully passed the examination in the fundamental engineering subjects prior to completion of the requisite years of experience in engineering work as provided in RCW 18.43.060, and who shall have received a certificate stating that he or she has successfully passed this portion of the professional examination.

     Engineering:  The term "engineering" as used in this chapter shall mean the "practice of engineering" as hereinafter defined.

     Practice of engineering:  The term "practice of engineering" within the meaning and intent of this chapter shall mean any professional service or creative work requiring engineering education, training, and experience and the application of special knowledge of the mathematical, physical, and engineering sciences to such professional services or creative work as consultation, investigation, evaluation, planning, design and supervision of construction for the purpose of assuring compliance with specifications and design, in connection with any public or private utilities, structures, buildings, machines, equipment, processes, works, or projects.

     A person shall be construed to practice or offer to practice engineering, within the meaning and intent of this chapter, who practices any branch of the profession of engineering; or who, by verbal claim, sign, advertisement, letterhead, card, or in any other way represents himself or herself to be a professional engineer, or through the use of some other title implies that he or she is a professional engineer; or who holds himself or herself out as able to perform, or who does perform, any engineering service or work or any other professional service designated by the practitioner or recognized by educational authorities as engineering.

     The practice of engineering shall not include the work ordinarily performed by persons who operate or maintain machinery or equipment.

     Land surveyor:  The term "land surveyor" as used in this chapter shall mean a person who, through technical knowledge and skill gained by education and/or by experience, is qualified to practice land surveying as hereinafter defined.

     Practice of land surveying:  The term "practice of land surveying" within the meaning and intent of this chapter, shall mean assuming responsible charge of the surveying of land for the establishment of corners, lines, boundaries, and monuments, the laying out and subdivision of land, the defining and locating of corners, lines, boundaries and monuments of land after they have been established, the survey of land areas for the purpose of determining the topography thereof, the making of topographical delineations and the preparing of maps and accurate records thereof, when the proper performance of such services requires technical knowledge and skill.

     Board:  The term "board" as used in this chapter shall mean the state board of registration for professional engineers and land surveyors, provided for by this chapter.

 

     Sec. 2.  RCW 18.43.040 and 1947 c 283 s 7 are each amended to read as follows:

     The following will be considered as minimum evidence satisfactory to the board that the applicant is qualified for registration as a professional engineer, engineer-in-training, or land surveyor, respectively, to wit:

     As a professional engineer:  A specific record of eight years or more of experience in engineering work of a character satisfactory to the board and indicating that the applicant is competent to practice engineering; and successfully passing a written or oral examination, or both, in engineering as prescribed by the board.

     Graduation in an approved engineering curriculum of four years or more from a school or college approved by the board as of satisfactory standing shall be considered equivalent to four years of such required experience.  The satisfactory completion of each year of such an approved engineering course without graduation shall be considered as equivalent to a year of such required experience.  Graduation in a curriculum other than engineering from a school or college approved by the board shall be considered as equivalent to two years of such required experience:  PROVIDED, That no applicant shall receive credit for more than four years of experience because of undergraduate educational qualifications.  The board may, at its discretion, give credit as experience not in excess of one year, for satisfactory postgraduate study in engineering.

     As an engineer-in-training:  The board shall permit an applicant for registration as a professional engineer, upon his or her request, to take the prescribed examination in two stages.  The first stage of the examination may be taken upon submission of his or her application for ((certification)) registration as an engineer-in-training and payment of the application fee herein prescribed, at any time after the applicant has completed four years of the required engineering experience as defined above.  The first stage of the examination shall test the applicant's knowledge of appropriate fundamentals of engineering subjects, including mathematics and the basic sciences.

     At any time after the completion of the required eight years of engineering experience as defined above, the applicant may take the second stage of the examination, upon submission of application for registration and payment of the application fee herein prescribed.  This stage of the examination shall test the applicant's ability, upon the basis of his or her greater experience, to apply his or her knowledge and experience in the field of his or her specific training and qualifications.

     As a land surveyor:  A specific record of six years or more of experience in land surveying work of a character satisfactory to the board and indicating that the applicant is competent to practice land surveying, and successfully passing a written or oral examination, or both, in surveying as prescribed by the board.

     Graduation from a school or college approved by the board as of satisfactory standing, including the completion of an approved course in surveying, shall be considered equivalent to four years of such required experience.

     No person shall be eligible for registration as a professional engineer, engineer-in-training, or land surveyor, who is not of good character and reputation.

     Engineering teaching, of a character satisfactory to the board, shall be considered as experience not in excess of two years for professional engineering and one year for land surveying.

     The mere execution, as a contractor, of work designed by a professional engineer, or the supervision of the construction of such work as a foreman or superintendent shall not be deemed to be practice of engineering.

     Any person having the necessary qualifications prescribed in this chapter to entitle him or her to registration shall be eligible for such registration although ((he)) the person may not be practicing his or her profession at the time of making his or her application.

 

     Sec. 3.  RCW 18.43.050 and 1985 c 7 s 42 are each amended to read as follows:

     Application for registration shall be on forms prescribed by the board and furnished by the director, shall contain statements made under oath, showing the applicant's education and detail summary of his or her technical work and shall contain not less than five references, of whom three or more shall be engineers having personal knowledge of ((his)) the applicant's engineering experience.

     The registration fee for professional engineers shall be determined by the director as provided in RCW 43.24.086, which shall accompany the application and shall include the cost of examination and issuance of certificate.  ((The director shall also determine a fee as provided in RCW 43.24.086 to be paid upon issuance of the certificate.))  The fee for engineer-in-training shall be determined by the director as provided in RCW 43.24.086, which shall accompany the application and shall include the cost of examination and issuance of certificate. ((When registration as a professional engineer is completed by an engineer-in-training an additional fee determined by the director as provided in RCW 43.24.086 shall be paid before issuance of certificate as professional engineer.))

     The registration fee for land surveyors shall be determined by the director as provided in RCW 43.24.086, which shall accompany the application and shall include the cost of examination and issuance of certificate. ((The registration fee for professional engineers also qualified as land surveyors shall be the same as for professional engineers.))

     Should the board ((deny the issuance of a certificate of registration to any applicant)) find an applicant ineligible for registration, the ((initial)) registration fee ((deposited)) shall be retained as an application fee.

 

     Sec. 4.  RCW 18.43.060 and 1961 c 142 s 2 are each amended to read as follows:

     When oral or written examinations are required, they shall be held at such time and place as the board shall determine.  If examinations are required on fundamental engineering subjects (such as ordinarily given in college curricula) the applicant shall be permitted to take this part of the professional examination prior to his or her completion of the requisite years of experience in engineering work.  The board shall issue to each applicant upon successfully passing the examination in fundamental engineering subjects a certificate stating that ((he)) the applicant has passed the examination in fundamental engineering subjects and that his or her name has been recorded as an engineer-in-training.

     The scope of the examination and the methods of procedure shall be prescribed by the board with special reference to the applicant's ability to design and supervise engineering works so as to insure the safety of life, health and property.  Examinations shall be given for the purpose of determining the qualifications of applicants for registration separately in engineering and in land surveying.  A candidate failing an examination may apply for reexamination ((at the expiration of six months and will be reexamined without payment of additional fees)).  Subsequent examinations will be granted upon payment of a fee to be determined by the ((board)) director as provided in RCW 43.24.086.

 

     Sec. 5.  RCW 18.43.070 and 1959 c 297 s 4 are each amended to read as follows:

     The director of licensing shall issue a certificate of registration upon payment of a registration fee as provided for in this chapter, to any applicant who, in the opinion of the board, has satisfactorily met all the requirements of this chapter.  In case of a registered engineer, the certificate shall authorize the practice of "professional engineering" and specify the branch or branches in which specialized, and in case of a registered land surveyor, the certificate shall authorize the practice of "land surveying".  ((In the case of a registered professional engineer also qualified as land surveyor but one certificate shall be issued.))

     In case of engineer-in-training, the certificate shall state that the applicant has successfully passed the examination in fundamental engineering subjects required by the board and has been enrolled as an "engineer-in-training".  All certificates of registration shall show the full name of the registrant, shall have a serial number, and shall be signed by the chairman and the secretary of the board and by the director of licensing.

     The issuance of a certificate of registration by the director of licensing shall be prima facie evidence that the person named therein is entitled to all the rights and privileges of a registered professional engineer or a registered land surveyor, while the said certificate remains unrevoked and unexpired.

     Each registrant hereunder shall upon registration obtain a seal of the design authorized by the board, bearing the registrant's name and the legend "registered professional engineer" or "registered land surveyor".  Plans, specifications, plats and reports prepared by the registrant shall be signed, dated, and stamped with said seal or facsimile thereof.  Such signature and stamping shall constitute a certification by the registrant that the same was prepared by or under his or her direct supervision and that to his or her knowledge and belief the same was prepared in accordance with the requirements of the statute.  It shall be unlawful for anyone to stamp or seal any document with said seal or facsimile thereof after the certificate of registrant named thereon has expired or been revoked, unless said certificate shall have been renewed or reissued.

 

     Sec. 6.  RCW 18.43.130 and 1985 c 7 s 46 are each amended to read as follows:

     This chapter shall not be construed to prevent or affect:

     (1) The practice of any other legally recognized profession or trade; or

     (2) The practice of a person not a resident and having no established place of business in this state, practicing or offering to practice herein the profession of engineering or land surveying, when such practice does not exceed in the aggregate more than thirty days in any calendar year:  PROVIDED, Such person ((is)) has been determined by the board to be legally qualified by registration to practice the said profession in his or her own state or country in which the requirements and qualifications for obtaining a certificate of registration are not lower than those specified in this chapter. The person shall request such a determination by completing an application prescribed by the board and accompanied by a fee determined by the

director.  Upon approval of the application, the board shall issue a permit authorizing temporary practice; or

     (3) The practice of a person not a resident and having no established place of business in this state, or who has recently become a resident thereof, practicing or offering to practice herein for more than thirty days in any calendar year the profession of engineering or land surveying, if he or she shall have filed with the board an application for a certificate of registration and shall have paid the fee required by this chapter:  PROVIDED, That such person is legally qualified by registration to practice engineering or land surveying in his or her own state or country in which the requirements and qualifications of obtaining a certificate of registration are not lower than those specified in this chapter.  Such practice shall continue only for such time as the board requires for the consideration of the application for registration; or

     (4) The work of an employee or a subordinate of a person holding a certificate of registration under this chapter, or an employee of a person practicing lawfully under provisions of this section:  PROVIDED, That such work does not include final design or decisions and is done under the direct responsibility, checking, and supervision of a person holding a certificate of registration under this chapter or a person practicing lawfully under the provisions of this section; or

     (5) The work of a person rendering engineering or land surveying services to a corporation, as an employee of such corporation, when such services are rendered in carrying on the general business of the corporation and such general business does not consist, either wholly or in part, of the rendering of engineering services to the general public:  PROVIDED, That such corporation employs at least one person holding a certificate of registration under this chapter or practicing lawfully under the provisions of this chapter; or

     (6) The practice of officers or employees of the government of the United States while engaged within the state in the practice of the profession of engineering or land surveying for said government; or

     (7) Nonresident engineers employed for the purpose of making engineering examinations; or

     (8) The practice of engineering in this state by a corporation or joint stock association:  PROVIDED, That

     (a) Such corporation shall file with the board an application for certificate of authorization upon a form to be prescribed by the board and containing information required to enable the board to determine whether such corporation is qualified in accordance with the provisions of this chapter to practice engineering in this state;

     (b) Such corporation shall file with the board a certified copy of a resolution of the board of directors of the corporation which shall designate a person holding a certificate of registration under this chapter as responsible for the practice of engineering by said corporation in this state and shall provide that full authority to make all final engineering decisions on behalf of said corporation with respect to work performed by the corporation in this state shall be granted and delegated by the board of directors to the person so designated in said resolution:  PROVIDED, That the filing of such resolution shall not relieve the corporation of any responsibility or liability imposed upon it by law or by contract;

     (c) Such corporation shall file with the board a designation in writing setting forth the name or names of a person or persons holding certificates of registration under this chapter who shall be in responsible charge of each project and each major branch of the engineering activities in which the corporation shall specialize in this state.  In the event there shall be a change in the person or persons in responsible charge of any project or major branch of the engineering activities, such changes shall be designated in writing and filed with the board within thirty days after the effective date of such changes;

     (d) Upon the filing with the board of the application for certificate for authorization, certified copy of resolution, affidavit and designation of persons specified in subparagraphs (a), (b), and (c) of this section the board shall issue to such corporation a certificate of authorization to practice engineering in this state upon a determination by the board (((1))) that:

     (i) The bylaws of the corporation contain provisions that all engineering decisions pertaining to any project or engineering activities in this state shall be made by the specified engineer in responsible charge, or other responsible engineers under his or her direction or supervision;

     (ii) The application for certificate of authorization states the type, or types, of engineering practiced, or to be practiced by such corporation;

     (iii) A current certified financial statement accurately reflecting the financial condition of the corporation has been filed with the board and is available for public inspection;

     (iv) The applicant corporation has the ability to provide through qualified engineering personnel, professional services or creative work requiring engineering experience, and that with respect to the engineering services which the corporation undertakes or offers to undertake such personnel have the ability to apply special knowledge of the mathematical, physical, and engineering sciences to such professional services or creative work as consultation, investigation, evaluation, planning, design, and supervision of construction for the purpose of assuring compliance with specifications and design, in connection with any public or private utilities, structures, buildings, machines, equipment, processes, works, or projects;

     (v) The application for certificate of authorization states the professional records of the designated person or persons who shall be in responsible charge of each project and each major branch of engineering activities in which the corporation shall specialize;

     (vi) The application for certificate of authorization states the experience of the corporation, if any, in furnishing engineering services during the preceding five year period and states the experience of the corporation, if any, in the furnishing of all feasibility and advisory studies made within the state of Washington;

     (vii) The applicant corporation meets such other requirements related to professional competence in the furnishing of engineering services as may be established and promulgated by the board in furtherance of the objectives and provisions of this chapter; and

     (((2))) Upon a determination by the board based upon an evaluation of the foregoing findings and information that the applicant corporation is possessed of the ability and competence to furnish engineering services in the public interest.

     The board may in the exercise of its discretion refuse to issue or may suspend and/or revoke a certificate of authorization to a corporation where the board shall find that any of the officers, directors, incorporators, or the stockholders holding a majority of stock of such corporation has committed misconduct or malpractice as defined in RCW 18.43.105 or has been found personally responsible for misconduct or malpractice under the provisions of subsections (f) and (g) hereof.

     The certificate of authorization shall specify the major branches of engineering of which the corporation has designated a person or persons in responsible charge as provided in subsection (8)(c) of this section.

     (e) In the event a corporation, organized solely by a group of engineers, each holding a certificate of registration under this chapter, applies for a certificate of authorization, the board may, in its discretion, grant a certificate of authorization to such corporation based on a review of the professional records of such incorporators, in lieu of the required qualifications set forth in this subsection.  In the event the ownership of such corporation shall be altered, the corporation shall apply for a revised certificate of authorization, based upon the professional records of the owners, if exclusively engineers or, otherwise, under the qualifications required by subparagraphs (a), (b), (c), and (d) hereof.

     (f) Any corporation authorized to practice engineering under this chapter, together with its directors and officers for their own individual acts, are responsible to the same degree as an individual registered engineer, and must conduct its business without misconduct or malpractice in the practice of engineering as defined in this chapter.

     (g) Any corporation which has been duly certified under the provisions of this chapter and has engaged in the practice of engineering shall have its certificate of authorization either suspended or revoked by the board if, after a proper hearing, the board shall find that the corporation has committed misconduct or malpractice as defined in RCW 18.43.105.  In such case any individual engineer holding a certificate of registration under this chapter, involved in such malpractice or misconduct, shall have his or her certificate of registration suspended or revoked also.

     (h) All plans, specifications, designs, and reports when issued in connection with work performed by a corporation under its certificate of authorization shall be prepared by or under the responsible charge of and shall be signed by and shall be stamped with the official seal of a person holding a certificate of registration under this chapter.

     (i) For each certificate of authorization issued under the provisions of this subsection (8) of this section there shall be paid an initial fee determined by the director as provided in RCW 43.24.086 and an annual renewal fee determined by the director as provided in RCW 43.24.086.

     (9) The practice of engineering and/or land surveying in this state by partnership:  PROVIDED, That

     (a) A majority of the members of the partnership are engineers or architects or land surveyors duly certificated by the state of Washington or by a state, territory, possession, district, or foreign country meeting the reciprocal provisions of RCW 18.43.100:  PROVIDED, That at least one of the members is a professional engineer or land surveyor holding a certificate issued by the director under the provisions of RCW 18.43.070; and

     (b) Except where all members of the partnership are professional engineers or land surveyors or a combination of professional engineers and land surveyors or where all members of the partnership are either professional engineers or land surveyors in combination with an architect or architects all of which are holding certificates of qualification therefor issued under the laws of the state of Washington, the partnership shall file with the board an instrument executed by a partner on behalf of the partnership designating the persons responsible for the practice of engineering by the partnership in this state and in all other respects such person so designated and such partnership shall meet the same qualifications and shall be subject to the same requirements and the same penalties as those pertaining to corporations and to the responsible persons designated by corporations as provided in subsection (8) of this section.

     For each certificate of authorization issued under the provisions of this subsection (9) of this section there shall be paid an initial fee determined by the director as provided in RCW 43.24.086 and an annual renewal fee determined by the director as provided in RCW 43.24.086.

 

     Sec. 7.  RCW 18.43.100 and 1985 c 7 s 44 are each amended to read as follows:

     The board may, upon application ((therefor,)) and the payment of a fee determined by the director as provided in RCW 43.24.086, issue a certificate without further examination as a professional engineer or land surveyor to any person who holds a certificate of qualification of registration issued to ((him)) the applicant following examination by proper authority, of any state or territory or possession of the United States, the District of Columbia, or of any foreign country, provided:  (1) That the applicant's qualifications meet the requirements of the chapter((,)) and the rules established by the board, and (2) that the applicant is in good standing with the licensing agency in said state, territory, possession, district, or foreign country((; and (3) that the said state, territory, possession, district, or foreign country gives like consideration on a reciprocal basis to those persons who have been registered by examination in this state)).


     Passed the Senate March 12, 1991.

     Passed the House April 8, 1991.

Approved by the Governor April 17, 1991.

     Filed in Office of Secretary of State April 17, 1991.