"NEW SECTION.  Sec. 1   (1) The legislature finds and declares that meeting the state's future energy needs through conservation efforts, both large and small, is a priority. Small changes on the part of Washington consumers, such as switching from conventional, incandescent light bulbs to more efficient compact fluorescent bulbs, has the potential to save thousands of kilowatts of electricity each year. The legislature further finds that compact fluorescent bulbs are more efficient, last longer, emit less heat, and draw less current than conventional incandescent bulbs, which make them a safer and more cost-effective option for use in the home. The legislature finds that compact fluorescent bulbs and other types of general purpose lights contain quantities of hazardous substances that may pose a threat to the health of citizens and to the environment if not handled and recycled properly.
     (2) It is the intent of the legislature to encourage citizens to use energy efficient bulbs such as compact fluorescent bulbs and properly dispose of these bulbs at the end of their useful life. The legislature intends to establish a work group to make recommendations on how to recycle end-of-life general purpose lights generated in the state and educate consumers about proper management of general purpose lights.

Sec. 2   RCW 19.260.020 and 2006 c 194 s 1 are each amended to read as follows:
     The definitions in this section apply throughout this chapter unless the context clearly requires otherwise.
     (1) "Automatic commercial ice cube machine" means a factory-made assembly, not necessarily shipped in one package, consisting of a condensing unit and ice-making section operating as an integrated unit with means for making and harvesting ice cubes. It may also include integrated components for storing or dispensing ice, or both.
     (2) "Ballast" means a device used with an electric discharge lamp to obtain necessary circuit conditions, such as voltage, current, and waveform, for starting and operating the lamp.
     (3) "Commercial clothes washer" means a soft mount horizontal or vertical-axis clothes washer that: (a) Has a clothes container compartment no greater than 3.5 cubic feet in the case of a horizontal-axis product or no greater than 4.0 cubic feet in the case of a vertical-axis product; and (b) is designed for use by more than one household, such as in multifamily housing, apartments, or coin laundries.
     (4) "Commercial prerinse spray valve" means a handheld device designed and marketed for use with commercial dishwashing and warewashing equipment and that sprays water on dishes, flatware, and other food service items for the purpose of removing food residue prior to their cleaning.
     (5)(a) "Commercial refrigerators and freezers" means refrigerators, freezers, or refrigerator-freezers designed for use by commercial or institutional facilities for the purpose of storing or merchandising food products, beverages, or ice at specified temperatures that: (i) Incorporate most components involved in the vapor-compression cycle and the refrigerated compartment in a single cabinet; and (ii) may be configured with either solid or transparent doors as a reach-in cabinet, pass-through cabinet, roll-in cabinet, or roll-through cabinet.
     (b) "Commercial refrigerators and freezers" does not include: (i) Products with ((85)) eighty-five cubic feet or more of internal volume; (ii) walk-in refrigerators or freezers; (iii) consumer products that are federally regulated pursuant to 42 U.S.C. Sec. 6291 et seq.; (iv) products without doors; or (v) freezers specifically designed for ice cream.
     (6) "Compensation" means money or any other valuable thing, regardless of form, received or to be received by a person for services rendered.
     (7) "Department" means the department of community, trade, and economic development.
     (8) "General purpose lights" means lamps, bulbs, tubes, or other electric devices that provide functional illumination for indoor residential, indoor commercial, and outdoor use. "General purpose lights" do not include any of the following specialty lighting: Appliance, black light, bug, colored, infrared, left-hand thread, marine, marine signal service, mine service, plant light, reflector, rough service, shatter resistant, sign service, silver bowl, showcase, three-way, traffic signal, and vibration service or vibration resistant. "General purpose lights" also do not include lights needed to provide special needs lighting for individuals with exceptional needs.
     (9) "High-intensity discharge lamp" means a lamp in which light is produced by the passage of an electric current through a vapor or gas, and in which the light-producing arc is stabilized by bulb wall temperature and the arc tube has a bulb wall loading in excess of three watts per square centimeter.
     (((9))) (10) "Metal halide lamp" means a high-intensity discharge lamp in which the major portion of the light is produced by radiation of metal halides and their products of dissociation, possibly in combination with metallic vapors.
     (((10))) (11) "Metal halide lamp fixture" means a light fixture designed to be operated with a metal halide lamp and a ballast for a metal halide lamp.
     (((11))) (12) "Pass-through cabinet" means a commercial refrigerator or freezer with hinged or sliding doors on both the front and rear of the unit.
     (((12))) (13) "Probe-start metal halide ballast" means a ballast used to operate metal halide lamps which does not contain an igniter and which instead starts lamps by using a third starting electrode "probe" in the arc tube.
     (((13))) (14) "Reach-in cabinet" means a commercial refrigerator or freezer with hinged or sliding doors or lids, but does not include roll-in or roll-through cabinets or pass-through cabinets.
     (((14)))(15)(a) "Roll-in cabinet" means a commercial refrigerator or freezer with hinged or sliding doors that allow wheeled racks of product to be rolled into the unit.
     (b) "Roll-through cabinet" means a commercial refrigerator or freezer with hinged or sliding doors on two sides of the cabinet that allow wheeled racks of product to be rolled through the unit.
     (((15))) (16)(a) "Single-voltage external AC to DC power supply" means a device that: (i) Is designed to convert line voltage alternating current input into lower voltage direct current output; (ii) is able to convert to only one DC output voltage at a time; (iii) is sold with, or intended to be used with, a separate end-use product that constitutes the primary power load; (iv) is contained within a separate physical enclosure from the end-use product; (v) is connected to the end-use product via a removable or hard-wired male/female electrical connection, cable, cord, or other wiring; and (vi) has a nameplate output power less than or equal to 250 watts.
     (b) "Single-voltage external AC to DC power supply" does not include: (i) Products with batteries or battery packs that physically attach directly to the power supply unit; (ii) products with a battery chemistry or type selector switch and indicator light; or (iii) products with a battery chemistry or type selector switch and a state of charge meter.
     (((16))) (17) "State-regulated incandescent reflector lamp" means a lamp that is not colored or designed for rough or vibration service applications, that has an inner reflective coating on the outer bulb to direct the light, an E26 medium screw base, and a rated voltage or voltage range that lies at least partially within 115 to 130 volts, and that falls into one of the following categories:
     (a) A bulged reflector or elliptical reflector bulb shape and which has a diameter which equals or exceeds 2.25 inches;
     (b) A reflector, parabolic aluminized reflector, or similar bulb shape and which has a diameter of 2.25 to 2.75 inches.
     (((17))) (18) "Transformer" means a device consisting of two or more coils of insulated wire and that is designed to transfer alternating current by electromagnetic induction from one coil to another to change the original voltage or current value.
     (((18))) (19)(a) "Unit heater" means a self-contained, vented fan-type commercial space heater that uses natural gas or propane, and that is designed to be installed without ducts within a heated space.
     (b) "Unit heater" does not include any products covered by federal standards established pursuant to 42 U.S.C. Sec. 6291 et seq. or any product that is a direct vent, forced flue heater with a sealed combustion burner.

NEW SECTION.  Sec. 3   (1) The department of ecology, in consultation with the solid waste advisory committee created under RCW 70.95.040, shall convene a work group with representatives of the lighting industry, environmental organizations, fluorescent lamp retailers, waste haulers, lamp recyclers, and local governments to consider and make recommendations on the following issues:
     (a) The most effective, cost-efficient, and convenient method for the consumer to provide for the proper collection and recycling of any end-of-life general purpose lights generated in this state;
     (b) Methods to educate consumers about the proper management of and collection opportunities for end-of-life general purpose lights; and
     (c) Designation on the general purpose light and light packaging regarding the proper recycling of the light.
     (2) The department of ecology shall report its findings and recommendations for implementing and financing a recycling program for fluorescent lamps to the appropriate committees of the legislature by December 1, 2008.
     (3) This section expires September 1, 2009."