Washington law defines "untraceable firearms" as any firearm manufactured after July 1, 2019, that is not an antique firearm and that cannot be traced by law enforcement by means of a serial number affixed to the firearm by a federally licensed manufacturer or importer.
Washington prohibits the manufacture of an untraceable firearm with intent to sell. A violation of this restriction is punishable as a class C felony.
Washington further prohibits knowingly or recklessly allowing, facilitating, aiding, or abetting the manufacture or assembly of an undetectable firearm or untraceable firearm by a person who: (1) is ineligible under state or federal law to possess a firearm; or (2) has signed a valid voluntary waiver of firearm rights that has not been revoked. Failure to conduct a background check is prima facie evidence of recklessness. A violation of this restriction is punishable as a gross misdemeanor for a first offense, or as a class C felony for a repeat offense.
Untraceable Firearms—General Limitations.
The definition of "untraceable firearm" is revised to mean any firearm manufactured after July 1, 2019, that is not an antique firearm and that cannot be traced by law enforcement by means of a serial number affixed to the firearm by a federal firearms manufacturer, federal firearms importer, or federal firearms dealer in compliance with all federal laws and regulations.
After June 30, 2022, manufacturing, causing to be manufactured, assembling, causing to be assembled, selling, offering to sell, transferring, or purchasing an untraceable firearm is prohibited.
After March 10, 2023, knowingly or recklessly possessing, transporting, or receiving an untraceable firearm is prohibited, with exceptions for law enforcement agencies and federally licensed firearms importers, manufacturers, and dealers.
The foregoing restrictions on selling, offering to sell, transferring, purchasing, possessing, transporting, or receiving untraceable firearms do not apply to firearms rendered permanently inoperable, or that are antiques, or were manufactured prior to 1968, or have been imprinted with a serial number by a federal firearms dealer or other federal licensee authorized to provide marking services.
A violation of these restrictions in the first instance is a civil infraction punishable by a monetary penalty of $500. A second violation is punishable as a misdemeanor. A third or subsequent violation is punishable as a gross misdemeanor. Additionally, any violation of these restrictions with three or more untraceable firearms at a time is punishable as a gross misdemeanor.
Untraceable Firearms—Construction with Intent to Sell.
After June 30, 2022, the prohibition on manufacturing an untraceable firearm with intent to sell is expanded to also prohibit a person from causing to be manufactured, assembling, or causing to be assembled an untraceable firearm with intent to sell. Violations of this restriction are punishable as a class C felony.
Unfinished Frames and Receivers.
A "frame or receiver" is defined as a part of a firearm that, when the complete firearm is assembled, is visible from the exterior and provides housing or a structure designed to hold or integrate one or more fire control components, even if pins or other attachments are required to connect the fire control components. Any such part identified with a serial number is presumed to be a frame or receiver, absent an official determination by the Bureau of Alcohol, Tobacco, Firearms, and Explosives or other reliable evidence to the contrary. "Fire control component" means a component necessary for the firearm to initiate, complete, or continue the firing sequence, including any of the following: hammer, bolt, bolt carrier, breechblock, cylinder, trigger mechanism, firing pin, striker, or slide rails.
An "unfinished frame or receiver" is defined as a frame or receiver that is partially complete, disassembled, or inoperable, that: (1) has reached a stage in manufacture where it may readily be completed, assembled, converted, or restored to a functional state; or (2) is marketed or sold to the public to become or be used as the frame or receiver of a functional firearm once finished or completed, including without limitation products marketed or sold to the public as an 80 percent frame or receiver or unfinished frame or receiver.
For purpose of this definition:
After June 30, 2022, selling, offering to sell, transferring, or purchasing an unfinished frame or receiver is prohibited, with exceptions for purchases by federally licensed firearms importers, manufacturers, or dealers.
After March 10, 2023, knowingly or recklessly possessing, transporting, or receiving an unfinished frame or receiver is prohibited, with exceptions for law enforcement agencies and federally licensed firearms importers, manufacturers, or dealers.
The restrictions applicable to unfinished frames and receivers do not apply to unfinished frames or receivers that have been imprinted with a serial number issued by a federally licensed firearms importer, manufacturer, or dealer.
A violation of these restrictions in the first instance is a civil infraction punishable by a monetary penalty of $500. A second violation is punishable as a misdemeanor. A third or subsequent violation is punishable as a gross misdemeanor. Additionally, any violation of these restrictions with three or more unfinished frames or receivers at a time is punishable as a gross misdemeanor.
Marking Requirements.
Federal firearms dealers and other federal licensees authorized to provide marking services for firearms may imprint a firearm or unfinished frame or receiver with a serial number. The number must consist of: (1) the federal licensee's abbreviated federal firearms license number; and (2) a serial number, which may not duplicate any other serial number the federal licensee has placed on any other firearm or unfinished frame or receiver. Federal licensees providing serializations must maintain records in accordance with federal record requirements for the sale of a firearm.
(In support) Gun violence is a public health crisis. Between 2016 and 2020 law enforcement recovered nearly 24,000 ghost guns. Law enforcement report seeing increasing use of ghost guns in Washington and other states. Current law does not address homemade guns.
Untraceable homemade ghost guns are widely available and can be easily purchased online and assembled at home without any background check. Ghost guns, 80 percent receivers, and gun kits allow individuals to evade the background check process. Ghost guns leave no paper trail. Every gun sale should involve a background check, but ghost guns undermine the background check system.
Ghost guns can't be traced because they lack a serial number. They are designed to evade and delay criminal investigations and put communities at risk. Ghost guns are a favored tool of firearms traffickers and weapons-of-choice for domestic violence offenders. No one needs an untraceable firearm.
This bill will not burden hobbyists, who will still be able to obtain serialized parts to build firearms.
(Opposed) The United States has a long tradition of homemade firearms and gunsmiths have a constitutional right to privately manufacture their own firearms. This bill infringes on Second Amendment rights and the Washington Constitution.
This law is unnecessary. All firearms are already federally regulated, regardless of how they are manufactured. New laws will not deter criminals or stop them from obtaining guns but will burden hobbyists. This bill won't address trafficking and criminals. This bill is simply trying to micromanage citizens. There is no evidence individuals who could not pass background checks are making ghost guns. Moreover, manufacturing a firearm is not easy; it requires time, tools, and knowledge. Most firearms used in crimes are obtained through theft. The remedy to gun crimes is to aggressively pursue criminal misuse of guns. Existing laws should be enforced.
The bill's definition of "unfinished frame and receiver" is vague. It is not clear when a block of metal or plastic becomes an unfinished frame and receiver. This law lacks factors considered by federal law and any critical stage analysis. Additionally, the bill's regulation of assembly is overbroad. Despite stating an intent to be interpreted in a manner consistent with federal law, the text of the bill is broader than federal law.
The proposed law does not grandfather in existing guns and would require their serialization. Legal owners of firearm kits should not be criminalized.