H-2896.3

SECOND SUBSTITUTE HOUSE BILL 1682

ByHouse Appropriations (originally sponsored by Representatives Fitzgibbon, Ramel, Duerr, Berry, Macri, Ormsby, and Hackney; by request of Department of Ecology)

AN ACT Relating to a compliance pathway specific to emissions-intensive, trade-exposed businesses for achieving their proportionate share of the state's emissions reduction limits through 2050; amending RCW 70A.65.110, 70A.65.230, 70A.65.260, 70A.65.010, and 70A.65.080; adding new sections to chapter 70A.65 RCW; and prescribing penalties.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

Sec. 1. RCW 70A.65.110 and 2021 c 316 s 13 are each amended to read as follows:

(1) Facilities owned or operated by a covered entity must receive an allocation of allowances for the covered emissions at those facilities under this subsection at no cost if the operations of the facility are classified as emissions-intensive and trade-exposed, as determined by being engaged in one or more of the processes described by the following industry descriptions and codes in the North American industry classification system, as those classifications existed on January 1, 2021:

(a) Metals manufacturing, including iron and steel making, ferroalloy and primary metals manufacturing, secondary aluminum smelting and alloying, aluminum sheet, plate, and foil manufacturing, and smelting, refining, and alloying of other nonferrous metals, North American industry classification system codes beginning with 331;

(b) Paper manufacturing, including pulp mills, paper mills, and paperboard milling, North American industry classification system codes beginning with 322;

(c) Aerospace product and parts manufacturing, North American industry classification system codes beginning with 3364;

(d) Wood products manufacturing, North American industry classification system codes beginning with 321;

(e) Nonmetallic mineral manufacturing, including glass container manufacturing, North American industry classification system codes beginning with 327;

(f) Chemical manufacturing, North American industry classification system codes beginning with 325;

(g) Computer and electronic product manufacturing, including semiconductor and related device manufacturing, North American industry classification system codes beginning with 334;

(h) Food manufacturing, North American industry classification system codes beginning with 311;

(i) Cement manufacturing, North American industry classification system code 327310;

(j) Petroleum refining, North American industry classification system code 324110;

(k) Asphalt paving mixtures and block manufacturing from refined petroleum, North American industry classification system code 324121;

(l) Asphalt shingle and coating manufacturing from refined petroleum, North American industry classification system code 324122; and

(m) All other petroleum and coal products manufacturing from refined petroleum, North American industry classification system code 324199.

(2) By July 1, 2022, the department must adopt by rule objective criteria for both emissions' intensity and trade exposure for the purpose of identifying emissions-intensive, trade-exposed ((manufacturing businesses))facilities during the second compliance period of the program and subsequent compliance periods. A manufacturing facility covered by subsection (1)(a) through (m) of this section is considered an emissions-intensive, trade-exposed facility and is eligible for allocation of no cost allowances as described in this section. In addition, any covered party that ((is a manufacturing business))owns or operates a manufacturing facility that can demonstrate to the department that it meets the objective criteria adopted by rule is also eligible for treatment as emissions-intensive, trade-exposed and is eligible for allocation of no cost allowances as described in this section. In developing the objective criteria under this subsection, the department must consider the locations of facilities potentially identified as emissions-intensive, trade-exposed ((manufacturing businesses))facilities relative to overburdened communities.

(3)(a) For the first compliance period beginning in January 1, 2023, the annual allocation of no cost allowances for direct distribution to a facility identified as emissions-intensive and trade-exposed must be equal to the facility's baseline carbon intensity established using data from 2015 through 2019, or other data as allowed under this section, multiplied by the facility's actual production for each calendar year during the compliance period. For facilities using the mass-based approach, the allocation of no cost allowances shall be equal to the facility's mass-based baseline using data from 2015 through 2019, or other data as allowed under this section.

(b) For the second compliance period, beginning in January, 2027, and in each subsequent compliance period, the annual allocation of no cost allowances established in (a) of this subsection shall be adjusted according to the benchmark reduction schedules established in (b)(ii) and (iii) and (e) of this subsection multiplied by the facility's actual production during the period. The department shall adjust the no cost allocation of allowances and credits to an emissions-intensive and trade-exposed facility to avoid duplication with any no cost allowances transferred pursuant to RCW 70A.65.120 and 70A.65.130, if applicable.

(i) For the purpose of this section, "carbon intensity" means the amount of carbon dioxide equivalent emissions from a facility in metric tons divided by the facility specific measure of production including, but not limited to, units of product manufactured or sold, over the same time interval.

(ii) If an emissions-intensive and trade-exposed facility is not able to feasibly determine a carbon intensity benchmark based on its unique circumstances, the entity may elect to use a mass-based baseline that does not vary based on changes in production volumes. The mass-based baseline must be based upon data from 2015 through 2019, unless the emissions-intensive, trade-exposed facility can demonstrate that there have been abnormal periods of operation that materially impacted the facility and the baseline period should be expanded to include years prior to 2015. For each year during the first four-year compliance period that begins January 1, 2023, these facilities must be awarded no cost allowances equal to 100 percent of the facility's mass-based baseline. For each year during the second four-year compliance period that begins January 1, 2027, these facilities must be awarded no cost allowances equal to 97 percent of the facility's mass-based baseline. For each year during the third compliance period that begins January 1, 2031, these facilities must be awarded no cost allowances equal to 94 percent of the facility's mass-based baseline. Except as provided in (b)(iii) of this subsection, if a facility elects to use a mass-based baseline, it may not later convert to a carbon intensity benchmark during the first three compliance periods.

(iii) A facility with a North American industry classification system code beginning with 3364 that is utilizing a mass-based baseline in (b)(ii) of this subsection must receive an additional no cost allowance allocation under this section in order to accommodate an increase in production that increases its emissions above the baseline on a basis equivalent in principle to those awarded to entities utilizing a carbon intensity benchmark pursuant to this subsection (3)(b). The department shall establish methods to award, for any annual period, additional no cost allowance allocations under this section and, if appropriate based on projected production, to achieve a similar ongoing result through the adjustment of the facility's mass-based baseline. An eligible facility under this subsection that has elected to use a mass-based baseline may not convert to a carbon intensity benchmark until the next compliance period.

(c)(i) By September 15, 2022, each emissions-intensive, trade-exposed facility shall submit its carbon intensity baseline for the first compliance period to the department. The carbon intensity baseline for the first compliance period must use data from 2015-2019, unless the emissions-intensive, trade-exposed facility can demonstrate that there have been abnormal periods of operation that materially impacted the facility and the baseline period should be expanded to include years prior to 2015.

(ii) By November 15, 2022, the department shall review and approve each emissions-intensive, trade-exposed facility's baseline carbon intensity for the first compliance period.

(d) During the first four-year compliance period that begins January 1, 2023, each emissions-intensive, trade-exposed facility must record its facility-specific carbon intensity baseline based on its actual production.

(e)(i) For the second four-year compliance period that begins January 1, 2027, the second period benchmark for each emissions-intensive, trade-exposed facility is three percent below the first period baseline specified in (a), (b), and (c) of this subsection.

(ii) For the third four-year compliance period that begins January 1, 2031, the third period benchmark for each emissions-intensive, trade-exposed facility is three percent lower than the second period benchmark.

(f) Prior to the beginning of either the second, third, or subsequent compliance periods, and only after the completion of the report required in subsection (4) of this section, the department may make an upward adjustment in the next compliance period's benchmark for an emissions-intensive, trade-exposed facility based on the facility's demonstration to the department that additional reductions in carbon intensity or mass emissions are not technically or economically feasible. The department may base the upward adjustment applicable to an emissions-intensive, trade-exposed facility in the next compliance period on the facility's best available technology analysis. The department shall by rule provide for an emissions-intensive, trade-exposed ((facilities))facility to apply to the department for an upwards adjustment to the allocation for direct distribution of no cost allowances based on its facility-specific carbon intensity benchmark or mass emissions baseline. The department shall make adjustments based on:

(i) A significant change in the emissions use or emissions attributable to the manufacture of an individual good or goods in this state by an emissions-intensive, trade-exposed facility based on a finding by the department that an adjustment is necessary to accommodate for changes in the manufacturing process that have a material impact on emissions;

(ii) Significant changes to an emissions-intensive, trade-exposed facility's external competitive environment that result in a significant increase in leakage risk; or

(iii) Abnormal operating periods when an emissions-intensive, trade-exposed facility's carbon intensity has been materially affected so that these abnormal operating periods are either excluded or otherwise considered in the establishment of the compliance period carbon intensity benchmarks.

(4)(a) By December 1, ((2026))2024, the department shall provide a report to the appropriate committees of the senate and house of representatives that describes alternative methods for determining the amount and a schedule of allowances to be provided to facilities owned or operated by each covered entity designated as an emissions-intensive, trade-exposed facility from January 1, 2035, through January 1, 2050. In developing the report, the department must consider, among other relevant information, the criteria in the statement of intent with respect to emissions-intensive, trade-exposed industries in section 4 of this act. The report must include a review of global best practices in ensuring against emissions leakage and economic harm to businesses in carbon pricing programs ((and)), describe alternative methods of emissions performance benchmarking, and describe alternative methods of mass-based allocation of no cost allowances. At a minimum, the department must evaluate benchmarks based on both carbon intensity and mass, as well as ((the use of best available technology as a method for))recommend a process through which an emissions-intensive, trade-exposed facility may demonstrate its use of best available technology as a method of compliance. For each alternative method considered, the report must address any potential impact on the ability of the department to enter into a linkage agreement with another jurisdiction or to remain linked with another jurisdiction. In developing the report, the department shall form an advisory group that ((includes))must include, but is not limited to, representatives of the manufacturers listed in subsection (1) of this section, other covered entities, environmental organizations, and technical experts.

(b) If the legislature does not adopt a compliance obligation for emissions-intensive, trade-exposed facilities by December 1, 2027, those facilities must continue to receive allowances as provided in the third four-year compliance period that begins January 1, 2031.

(5) If the actual emissions of an emissions-intensive, trade- exposed facility exceed the facility's no cost allowances assigned for that compliance period, it must acquire additional compliance instruments such that the total compliance instruments transferred to its compliance account consistent with this chapter ((316, Laws of 2021)) equals emissions during the compliance period. An emissions-intensive, trade-exposed facility must be allowed to bank unused allowances, including for future sale and investment in best available technology when economically feasible. The department shall limit the use of offset credits for compliance by an emissions-intensive, trade-exposed facility, such that the quantity of no cost allowances plus the provision of offset credits does not exceed 100 percent of the facility's total compliance obligation over a compliance period.

(6) The department must withhold or withdraw the relevant share of allowances allocated to a covered entity under this section in the event that the covered entity ceases production in the state and becomes a closed facility. In the event an entity curtails all production and becomes a curtailed facility, the allowances are retained but cannot be traded, sold, or transferred and are still subject to the emission reduction requirements specified in this section. An owner or operator of a curtailed facility may transfer the allowances to a new operator of the facility that will be operated under the same North American industry classification system codes. If the curtailed facility becomes a closed facility, then all unused allowances will be transferred to the emissions containment reserve. A curtailed facility is not eligible to receive free allowances during a period of curtailment. Any allowances withheld or withdrawn under this subsection must be transferred to the emissions containment reserve.

(7) An owner or operator of more than one facility receiving no cost allowances under this section may transfer allowances among the eligible facilities.

(8) Rules adopted by the department under this section must include protocols for allocating allowances at no cost to an eligible facility built after July 25, 2021. The protocols must include consideration of the products and criteria pollutants being produced by the facility, as well as the local environmental and health impacts associated with the facility. For a facility that is built on tribal lands or is determined by the department to impact tribal lands and resources, the protocols must be developed in consultation with the affected tribal nations.

Sec. 2. RCW 70A.65.230 and 2021 c 316 s 26 are each amended to read as follows:

(1) It is the intent of the legislature that each year the total investments made through the carbon emissions reduction account created in RCW 70A.65.240, the climate commitment account created in RCW 70A.65.260, the natural climate solutions account created in RCW 70A.65.270, and the air quality and health disparities improvement account created in RCW 70A.65.280, achieve the following:

(a) A minimum of not less than 35 percent and a goal of 40 percent of total investments that provide direct and meaningful benefits to vulnerable populations within the boundaries of overburdened communities identified under chapter 314, Laws of 2021; and

(b) In addition to the requirements of (a) of this subsection, a minimum of not less than 10 percent of total investments that are used for programs, activities, or projects formally supported by a resolution of an Indian tribe, with priority given to otherwise qualifying projects directly administered or proposed by an Indian tribe. An investment that meets the requirements of both this subsection (1)(b) and (a) of this subsection may count toward the minimum percentage targets for both subsections.

(2) The expenditure of moneys under this chapter must be consistent with applicable federal, state, and local laws, and treaty rights including, but not limited to, prohibitions on uses of funds imposed by the state Constitution.

(3) For the purposes of this section, "benefits" means investments or activities that:

(a) Reduce vulnerable population characteristics, environmental burdens, or associated risks that contribute significantly to the cumulative impact designation of highly impacted communities;

(b) Meaningfully protect an overburdened community from, or support community response to, the impacts of air pollution or climate change; or

(c) Meet a community need identified by vulnerable members of the community that is consistent with the intent of this chapter.

(4) The state must develop a process by which to evaluate the impacts of the investments made under this chapter, work across state agencies to develop and track priorities across the different eligible funding categories, and work with the environmental justice council pursuant to RCW 70A.65.040.

(((5) No expenditures may be made from the carbon emissions reduction account created in RCW 70A.65.240, the climate investment account created in RCW 70A.65.250, or the air quality and health disparities improvement account created in RCW 70A.65.280 if, by April 1, 2023, the legislature has not considered and enacted request legislation brought forth by the department under RCW 70A.65.060 that outlines a compliance pathway specific to emissions-intensive, trade-exposed businesses for achieving their proportionate share of the state's emissions reduction limits through 2050.))

Sec. 3. RCW 70A.65.260 and 2021 c 316 s 29 are each amended to read as follows:

(1) The climate commitment account is created in the state treasury. The account must receive moneys distributed to the account from the climate investment account created in RCW 70A.65.250. Moneys in the account may be spent only after appropriation. Projects, activities, and programs eligible for funding from the account must be physically located in Washington state and include, but are not limited to, the following:

(a) Implementing the working families tax rebate in RCW 82.08.0206;

(b) Supplementing the growth management planning and environmental review fund established in RCW 36.70A.490 for the purpose of making grants or loans to local governments for the purposes set forth in RCW 43.21C.240, 43.21C.031, 36.70A.500, and 36.70A.600, for costs associated with RCW 36.70A.610, and to cover costs associated with the adoption of optional elements of comprehensive plans consistent with RCW 43.21C.420;

(c) Programs, activities, or projects that reduce and mitigate impacts from greenhouse gases and copollutants in overburdened communities, including strengthening the air quality monitoring network to measure, track, and better understand air pollution levels and trends and to inform the analysis, monitoring, and pollution reduction measures required in RCW 70A.65.020;

(d) Programs, activities, or projects that deploy renewable energy resources, such as solar and wind power, and projects to deploy distributed generation, energy storage, demand-side technologies and strategies, and other grid modernization projects;

(e) Programs, activities, or projects that increase the energy efficiency or reduce greenhouse gas emissions of industrial facilities including, but not limited to, proposals to implement combined heat and power, district energy, or on-site renewables, such as solar and wind power, to upgrade the energy efficiency of existing equipment, to reduce process emissions, and to switch to less emissions-intensive fuel sources, including programs, activities, or projects that reduce covered emissions of facilities identified as emissions-intensive, trade-exposed industries pursuant to RCW 70A.65.110;

(f) Programs, activities, or projects that achieve energy efficiency or emissions reductions in the agricultural sector including:

(i) Fertilizer management;

(ii) Soil management;

(iii) Bioenergy;

(iv) Biofuels;

(v) Grants, rebates, and other financial incentives for agricultural harvesting equipment, heavy-duty trucks, agricultural pump engines, tractors, and other equipment used in agricultural operations;

(vi) Grants, loans, or any financial incentives to food processors to implement projects that reduce greenhouse gas emissions;

(vii) Renewable energy projects;

(viii) Farmworker housing weatherization programs;

(ix) Dairy digester research and development;

(x) Alternative manure management; and

(xi) Eligible fund uses under RCW 89.08.615;

(g) Programs, activities, or projects that increase energy efficiency in new and existing buildings, or that promote low carbon architecture, including use of newly emerging alternative building materials that result in a lower carbon footprint in the built environment over the life cycle of the building and component building materials;

(h) Programs, activities, or projects that promote the electrification and decarbonization of new and existing buildings, including residential, commercial, and industrial buildings;

(i) Programs, activities, or projects that improve energy efficiency, including district energy, and investments in market transformation of high efficiency electric appliances and equipment for space and water heating;

(j) Clean energy transition and assistance programs, activities, or projects that assist affected workers or people with lower incomes during the transition to a clean energy economy, or grow and expand clean manufacturing capacity in communities across Washington state including, but not limited to:

(i) Programs, activities, or projects that directly improve energy affordability and reduce the energy burden of people with lower incomes, as well as the higher transportation fuel burden of rural residents, such as bill assistance, energy efficiency, and weatherization programs;

(ii) Community renewable energy projects that allow qualifying participants to own or receive the benefits of those projects at reduced or no cost;

(iii) Programs, activities, or other worker-support projects for bargaining unit and nonsupervisory fossil fuel workers who are affected by the transition away from fossil fuels to a clean energy economy. Worker support may include, but is not limited to: (A) Full wage replacement, health benefits, and pension contributions for every worker within five years of retirement; (B) full wage replacement, health benefits, and pension contributions for every worker with at least one year of service for each year of service up to five years of service; (C) wage insurance for up to five years for workers reemployed who have more than five years of service; (D) up to two years of retraining costs, including tuition and related costs, based on in-state community and technical college costs; (E) peer counseling services during transition; (F) employment placement services, prioritizing employment in the clean energy sector; and (G) relocation expenses;

(iv) Direct investment in workforce development, via technical education, community college, institutions of higher education, apprenticeships, and other programs including, but not limited to:

(A) Initiatives to develop a forest health workforce established under RCW 76.04.521; and

(B) Initiatives to develop new education programs, emerging fields, or jobs pertaining to the clean energy economy;

(v) Transportation, municipal service delivery, and technology investments that increase a community's capacity for clean manufacturing, with an emphasis on communities in greatest need of job creation and economic development and potential for commute reduction;

(k) Programs, activities, or projects that reduce emissions from landfills and waste-to-energy facilities through diversion of organic materials, methane capture or conversion strategies, or other means;

(l) Carbon dioxide removal projects, programs, and activities; and

(m) Activities to support efforts to mitigate and adapt to the effects of climate change affecting Indian tribes, including capital investments in support of the relocation of Indian tribes located in areas at heightened risk due to anticipated sea level rise, flooding, or other disturbances caused by climate change. The legislature intends to dedicate at least $50,000,000 per biennium from the account for purposes of this subsection.

(2) Moneys in the account may not be used for projects or activities that would violate tribal treaty rights or result in significant long-term damage to critical habitat or ecological functions. Investments from this account must result in long-term environmental benefits and increased resilience to the impacts of climate change.

NEW SECTION.  Sec. 4. A new section is added to chapter 70A.65 RCW to read as follows:

(1) This section constitutes a statement of legislative intent with respect to amending, at a future date, the allocation of allowances to emissions-intensive, trade-exposed facilities under RCW 70A.65.110. Nothing in this section may be construed to establish, amend, or eliminate a right, duty, or compliance obligation or other obligation under this chapter or any other state law.

(2) It is the intent of the legislature, in establishing a policy applicable to emissions-intensive, trade-exposed facilities, to:

(a) Ensure that emissions-intensive, trade-exposed industries achieve their proportionate share of the state's emissions limits established in RCW 70A.45.020 and avoid leakage of emissions and jobs;

(b) Reduce criteria air pollution and environmental health disparities, particularly in overburdened communities as defined in chapter 70A.02 RCW; and

(c) Synchronize Washington's policy for reducing industrial emissions with carbon border adjustment mechanisms as they are adopted by other jurisdictions that have enacted a carbon price, in a manner consistent with international trade law and the United States Constitution.

(3) It is the intent of the legislature, upon establishing a permanent policy applicable to emissions-intensive, trade-exposed facilities, to:

(a) Transition industrial boilers used in manufacturing to nonemitting technology, with a prioritization of transitioning:

(i) Boilers that burn coal or oil, followed by boilers that burn gas;

(ii) Boilers that are less energy-efficient or emissions-efficient over boilers that are comparatively more efficient; and

(iii) Larger boilers over smaller boilers;

(b) Transition industrial technologies that require temperatures that cannot be produced by electricity to renewable natural gas, renewable hydrogen, or other lower-emissions technologies;

(c) Maximize the use of building materials produced using versions of lower-emissions manufacturing processes, such as:

(i) Lower-emissions steel as compared to other forms of steel, prioritizing: (A) Recycled steel, followed by lower-emissions steel produced using renewable hydrogen or molten oxide electrolysis; and (B) to phase out the use of steel produced in a blast furnace; and

(ii) Low-clinker cement as compared to other forms of cement;

(d) Encourage recycling of emissions-intensive or energy-intensive products, including steel, aluminum, plastic, concrete, textiles, glass, and paper, where such recycling is less emissions-intensive from a life-cycle perspective than using nonrecycled manufacturing inputs; and

(e) Implement carbon capture and sequestration for the most difficult to decarbonize industrial processes, including cement production.

(4) It is the intent of the legislature to ensure that, just as emissions-intensive, trade-exposed facilities are given special consideration under this chapter due to their unique competitive environment and emissions portfolios, the compliance obligations of district energy facilities with emissions-intensive processes and unique commercial characteristics be established with special consideration given to the competitive market environment in which such facilities operate and the particular aspects of their emissions portfolios and potential for emission reductions or emission rate reductions to be achieved at such facilities.

Sec. 5. RCW 70A.65.010 and 2021 c 316 s 2 are each amended to read as follows:

The definitions in this section apply throughout this chapter unless the context clearly requires otherwise.

(1) "Allowance" means an authorization to emit up to one metric ton of carbon dioxide equivalent.

(2) "Allowance price containment reserve" means an account maintained by the department with allowances available for sale through separate reserve auctions at predefined prices to assist in containing compliance costs for covered and opt-in entities in the event of unanticipated high costs for compliance instruments.

(3) "Annual allowance budget" means the total number of greenhouse gas allowances allocated for auction and distribution for one calendar year by the department.

(4) "Asset controlling supplier" means any entity that owns or operates interconnected electricity generating facilities or serves as an exclusive marketer for these facilities even though it does not own them, and has been designated by the department and received a department-published emissions factor for the wholesale electricity procured from its system. The department shall use a methodology consistent with the methodology used by an external greenhouse gas emissions trading program that shares the regional electricity transmission system. Electricity from an asset controlling supplier is considered a specified source of electricity.

(5) "Auction" means the process of selling greenhouse gas allowances by offering them up for bid, taking bids, and then distributing the allowances to winning bidders.

(6) "Auction floor price" means a price for allowances below which bids at auction are not eligible to be accepted.

(7) "Auction purchase limit" means the limit on the number of allowances one registered entity or a group of affiliated registered entities may purchase from the share of allowances sold at an auction.

(8) "Balancing authority" means the responsible entity that integrates resource plans ahead of time, maintains load-interchange-generation balance within a balancing authority area, and supports interconnection frequency in real time.

(9) "Balancing authority area" means the collection of generation, transmission, and load within the metered boundaries of a balancing authority. A balancing authority maintains load-resource balance within this area.

(10) "Best available technology" means a technology or technologies that will achieve the greatest reduction in greenhouse gas emissions, taking into account the fuels, processes, and equipment used by facilities to produce goods of comparable type, quantity, and quality. Best available technology must be technically feasible, commercially available, economically viable, not create excessive environmental impacts, and be compliant with all applicable laws while not changing the characteristics of the good being manufactured.

(11) "Biomass" means nonfossilized and biodegradable organic material originating from plants, animals, and microorganisms, including products, by-products, residues, and waste from agriculture, forestry, and related industries as well as the nonfossilized and biodegradable organic fractions of industrial waste, including gases and liquids recovered from the decomposition of nonfossilized and biodegradable organic material.

(12) "Biomass-derived fuels," "biomass fuels," or "biofuels" means fuels derived from biomass that have at least 40 percent lower greenhouse gas emissions based on a full life-cycle analysis when compared to petroleum fuels for which biofuels are capable as serving as a substitute.

(13) "Carbon dioxide equivalents" means a measure used to compare the emissions from various greenhouse gases based on their global warming potential.

(14) "Carbon dioxide removal" means deliberate human activities removing carbon dioxide from the atmosphere and durably storing it in geological, terrestrial, or ocean reservoirs, or in products. "Carbon dioxide removal" includes existing and potential anthropogenic enhancement of biological or geochemical sinks and including, but not limited to, carbon mineralization and direct air capture and storage.

(15) "Climate commitment" means the process and mechanisms to ensure a coordinated and strategic approach to advancing climate resilience and environmental justice and achieving an equitable and inclusive transition to a carbon neutral economy.

(16) "Climate resilience" is the ongoing process of anticipating, preparing for, and adapting to changes in climate and minimizing negative impacts to our natural systems, infrastructure, and communities. For natural systems, increasing climate resilience involves restoring and increasing the health, function, and integrity of our ecosystems and improving their ability to absorb and recover from climate-affected disturbances. For communities, increasing climate resilience means enhancing their ability to understand, prevent, adapt, and recover from climate impacts to people and infrastructure.

(17) "Closed facility" means a facility at which the current owner or operator has elected to permanently stop production and will no longer be an emissions source.

(18) "Compliance instrument" means an allowance or offset credit issued by the department or by an external greenhouse gas emissions trading program to which Washington has linked its greenhouse gas emissions cap and invest program. One compliance instrument is equal to one metric ton of carbon dioxide equivalent.

(19) "Compliance obligation" means the requirement to submit to the department the number of compliance instruments equivalent to a covered or opt-in entity's covered emissions during the compliance period.

(20) "Compliance period" means the four-year period for which the compliance obligation is calculated for covered entities.

(21) "Cost burden" means the impact on rates or charges to customers of electric utilities in Washington state for the incremental cost of electricity service to serve load due to the compliance cost for greenhouse gas emissions caused by the program. Cost burden includes administrative costs from the utility's participation in the program.

(22) "Covered emissions" means the emissions for which a covered entity has a compliance obligation under RCW 70A.65.080.

(23) "Covered entity" means a person that is designated by the department as subject to RCW 70A.65.060 through 70A.65.210.

(24) "Cumulative environmental health impact" has the same meaning as provided in RCW 70A.02.010.

(25) "Curtailed facility" means a facility at which the owner or operator has temporarily suspended production but for which the owner or operator maintains operating permits and retains the option to resume production if conditions become amenable.

(26) "Department" means the department of ecology.

(27) "Electricity importer" means:

(a) For electricity that is scheduled with a NERC e-tag to a final point of delivery into a balancing authority area located entirely within the state of Washington, the electricity importer is identified on the NERC e-tag as the purchasing-selling entity on the last segment of the tag's physical path with the point of receipt located outside the state of Washington and the point of delivery located inside the state of Washington;

(b) For facilities physically located outside the state of Washington with the first point of interconnection to a balancing authority area located entirely within the state of Washington when the electricity is not scheduled on a NERC e-tag, the electricity importer is the facility operator or owner;

(c) For electricity imported through a centralized market, the electricity importer will be defined by rule consistent with the rules required under RCW 70A.65.080(1)(c);

(d) For electricity from facilities allocated to serve retail electricity customers of a multijurisdictional electric company, the electricity importer is the multijurisdictional electric company;

(e) If the importer identified under (a) of this subsection is a federal power marketing administration over which the state of Washington does not have jurisdiction, and the federal power marketing administration has not voluntarily elected to comply with the program, then the electricity importer is the next purchasing-selling entity in the physical path on the NERC e-tag, or if no additional purchasing-selling entity over which the state of Washington has jurisdiction, then the electricity importer is the electric utility that operates the Washington transmission or distribution system, or the generation balancing authority;

(f) For electricity that is imported into the state by a federal power marketing administration and sold to a public body or cooperative customer or direct service industrial customer located in Washington pursuant to section 5(b) or (d) of the Pacific Northwest electric power planning and conservation act of 1980, P.L. 96-501, the electricity importer is the federal marketing administration;

(g) If the importer identified under (f) of this subsection has not voluntarily elected to comply with the program, then the electricity importer is the public body or cooperative customer or direct service industrial customer; or

(h) For electricity from facilities allocated to a consumer-owned utility inside the state of Washington from a multijurisdictional consumer-owned utility, the electricity importer is the consumer-owned utility inside the state of Washington.

(28) "Emissions containment reserve allowance" means a conditional allowance that is withheld from sale at an auction by the department or its agent to secure additional emissions reductions in the event prices fall below the emissions containment reserve trigger price.

(29) "Emissions containment reserve trigger price" means the price below which allowances will be withheld from sale by the department or its agent at an auction, as determined by the department by rule.

(30) "Emissions threshold" means the greenhouse gas emission level at or above which a person has a compliance obligation.

(31) "Environmental benefits" has the same meaning as defined in RCW 70A.02.010.

(32) "Environmental harm" has the same meaning as defined in RCW 70A.02.010.

(33) "Environmental impacts" has the same meaning as defined in RCW 70A.02.010.

(34) "Environmental justice" has the same meaning as defined in RCW 70A.02.010.

(35) "Environmental justice assessment" has the same meaning as identified in RCW 70A.02.060.

(36) "External greenhouse gas emissions trading program" means a government program, other than Washington's program created in this chapter, that restricts greenhouse gas emissions from sources outside of Washington and that allows emissions trading.

(37) "Facility" means any physical property, plant, building, structure, source, or stationary equipment located on one or more contiguous or adjacent properties in actual physical contact or separated solely by a public roadway or other public right-of-way and under common ownership or common control, that emits or may emit any greenhouse gas.

(38) "First jurisdictional deliverer" means the owner or operator of an electric generating facility in Washington or an electricity importer.

(39) "General market participant" means a registered entity that is not identified as a covered entity or an opt-in entity that is registered in the program registry and intends to purchase, hold, sell, or voluntarily retire compliance instruments.

(40) "Greenhouse gas" has the same meaning as in RCW 70A.45.010.

(41) "Holding limit" means the maximum number of allowances that may be held for use or trade by a registered entity at any one time.

(42) "Imported electricity" means electricity generated outside the state of Washington with a final point of delivery within the state.

(a) "Imported electricity" includes electricity from an organized market, such as the energy imbalance market.

(b) "Imported electricity" includes imports from linked jurisdictions, but such imports shall be construed as having no emissions.

(c) Electricity from a system that is marketed by a federal power marketing administration shall be construed as "imported electricity," not electricity generated in the state of Washington.

(d) "Imported electricity" does not include electricity imports of unspecified electricity that are netted by exports of unspecified electricity to any jurisdiction not covered by a linked program by the same entity within the same hour.

(e) For a multijurisdictional electric company, "imported electricity" means electricity, other than from in-state facilities, that contributes to a common system power pool. Where a multijurisdictional electric company has a cost allocation methodology approved by the utilities and transportation commission, the allocation of specific facilities to Washington's retail load will be in accordance with that methodology.

(f) For a multijurisdictional consumer-owned utility, "imported electricity" includes electricity from facilities that contribute to a common system power pool that are allocated to a consumer-owned utility inside the state of Washington pursuant to a methodology approved by the governing board of the consumer-owned utility.

(43) "Leakage" means a reduction in emissions of greenhouse gases within the state that is offset by a directly attributable increase in greenhouse gas emissions outside the state and outside the geography of another jurisdiction with a linkage agreement with Washington.

(44) "Limits" means the greenhouse gas emissions reductions required by RCW 70A.45.020.

(45) "Linkage" means a bilateral or multilateral decision under a linkage agreement between greenhouse gas market programs to accept compliance instruments issued by a participating jurisdiction to meet the obligations of regulated entities in a partner jurisdiction and to otherwise coordinate activities to facilitate operation of a joint market.

(46) "Linkage agreement" means a nonbinding agreement that connects two or more greenhouse gas market programs and articulates a mutual understanding of how the participating jurisdictions will work together to facilitate a connected greenhouse gas market.

(47) "Linked jurisdiction" means a jurisdiction with which Washington has entered into a linkage agreement.

(48) "Multijurisdictional consumer-owned utility" means a consumer-owned utility that provides electricity to member owners in Washington and in one or more other states in a contiguous service territory or from a common power system.

(49) "Multijurisdictional electric company" means an investor-owned utility that provides electricity to customers in Washington and in one or more other states in a contiguous service territory or from a common power system.

(50) "NERC e-tag" means North American electric reliability corporation (NERC) energy tag representing transactions on the North American bulk electricity market scheduled to flow between or across balancing authority areas.

(51) "Offset credit" means a tradable compliance instrument that represents an emissions reduction or emissions removal of one metric ton of carbon dioxide equivalent.

(52) "Offset project" means a project that reduces or removes greenhouse gases that are not covered emissions under this chapter.

(53) "Offset protocols" means a set of procedures and standards to quantify greenhouse gas reductions or greenhouse gas removals achieved by an offset project.

(54) "Overburdened community" means a geographic area where vulnerable populations face combined, multiple environmental harms and health impacts or risks due to exposure to environmental pollutants or contaminants through multiple pathways, which may result in significant disparate adverse health outcomes or effects.

(a) "Overburdened community" includes, but is not limited to:

(i) Highly impacted communities as defined in RCW 19.405.020;

(ii) Communities located in census tracts that are fully or partially on "Indian country" as defined in 18 U.S.C. Sec. 1151; and

(iii) Populations, including Native Americans or immigrant populations, who may be exposed to environmental contaminants and pollutants outside of the geographic area in which they reside based on the populations' use of traditional or cultural foods and practices, such as the use of resources, access to which is protected under treaty rights in ceded areas, when those exposures in conjunction with other exposures may result in disproportionately greater risks, including risks of certain cancers or other adverse health effects and outcomes.

(b) Overburdened communities identified by the department may include the same communities as those identified by the department through its process for identifying overburdened communities under RCW 70A.02.010.

(55) "Person" has the same meaning as defined in RCW 70A.15.2200(5)(h)(iii).

(56) "Point of delivery" means a point on the electricity transmission or distribution system where a deliverer makes electricity available to a receiver, or available to serve load. This point may be an interconnection with another system or a substation where the transmission provider's transmission and distribution systems are connected to another system, or a distribution substation where electricity is imported into the state over a multijurisdictional retail provider's distribution system.

(57) "Price ceiling unit" means the units issued at a fixed price by the department for the purpose of limiting price increases and funding further investments in greenhouse gas reductions.

(58) "Program" means the greenhouse gas emissions cap and invest program created by and implemented pursuant to this chapter.

(59) "Program registry" means the data system in which covered entities, opt-in entities, and general market participants are registered and in which compliance instruments are recorded and tracked.

(60) "Registered entity" means a covered entity, opt-in entity, or general market participant that has completed the process for registration in the program registry.

(61) "Resilience" means the ability to prepare, mitigate and plan for, withstand, recover from, and more successfully adapt to adverse events and changing conditions, and reorganize in an equitable manner that results in a new and better condition.

(62) "Retire" means to permanently remove a compliance instrument such that the compliance instrument may never be sold, traded, or otherwise used again.

(63) "Specified source of electricity" or "specified source" means a facility, unit, or asset controlling supplier that is permitted to be claimed as the source of electricity delivered. The reporting entity must have either full or partial ownership in the facility or a written power contract to procure electricity generated by that facility or unit or from an asset controlling supplier at the time of entry into the transaction to procure electricity.

(64) "Supplier" means a supplier of fuel in Washington state as defined in RCW 70A.15.2200(5)(h)(ii).

(65) "Tribal lands" has the same meaning as defined in RCW 70A.02.010.

(66) "Unspecified source of electricity" or "unspecified source" means a source of electricity that is not a specified source at the time of entry into the transaction to procure electricity.

(67) "Voluntary renewable reserve account" means a holding account maintained by the department from which allowances may be retired for voluntary renewable electricity generation, which is directly delivered to the state and has not and will not be sold or used to meet any other mandatory requirements in the state or any other jurisdiction, on behalf of voluntary renewable energy purchasers or end users.

(68) "Vulnerable populations" has the same meaning as defined in RCW 70A.02.010.

Sec. 6. RCW 70A.65.080 and 2021 c 316 s 10 are each amended to read as follows:

(1) A person is a covered entity as of the beginning of the first compliance period and all subsequent compliance periods if the person reported emissions under RCW 70A.15.2200 for any calendar year from 2015 through 2019, or if additional data provided as required by this chapter indicates that emissions for any calendar year from 2015 through 2019 equaled or exceeded any of the following thresholds, or if the person is a first jurisdictional deliverer and imports electricity into the state during the compliance period:

(a) Where the person owns or operates a facility and the facility's emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent;

(b) Where the person is a first jurisdictional deliverer and generates electricity in the state and emissions associated with this generation equals or exceeds 25,000 metric tons of carbon dioxide equivalent;

(c) Where the person is a first jurisdictional deliverer importing electricity into the state and the cumulative annual total of emissions associated with the imported electricity, whether from specified or unspecified sources, exceeds 25,000 metric tons of carbon dioxide equivalent. In consultation with any linked jurisdiction to the program created by this chapter, by October 1, 2026, the department, in consultation with the department of commerce and the utilities and transportation commission, shall adopt by rule a methodology for addressing imported electricity associated with a centralized electricity market;

(d) Where the person is a supplier of fossil fuel other than natural gas and from that fuel 25,000 metric tons or more of carbon dioxide equivalent emissions would result from the full combustion or oxidation, excluding the amounts for fuel products that are produced or imported with a documented final point of delivery outside of Washington and combusted outside of Washington; and

(e)(i) Where the person supplies natural gas in amounts that would result in exceeding 25,000 metric tons of carbon dioxide equivalent emissions if fully combusted or oxidized, excluding the amounts for fuel products that are produced or imported with a documented final point of delivery outside of Washington and combusted outside of Washington, and excluding the amounts: (A) Supplied to covered entities under (a) through (d) of this subsection; and (B) delivered to opt-in entities;

(ii) Where the person who is not a natural gas company and has a tariff with a natural gas company to deliver to an end-use customer in the state in amounts that would result in exceeding 25,000 metric tons of carbon dioxide equivalent emissions if fully combusted or oxidized, excluding the amounts: (A) Supplied to covered entities under (a) through (d) of this subsection; and (B) the amounts delivered to opt-in entities;

(iii) Where the person is an end-use customer in the state who directly purchases natural gas from a person that is not a natural gas company and has the natural gas delivered through an interstate pipeline to a distribution system owned by the purchaser in amounts that would result in exceeding 25,000 metric tons of carbon dioxide equivalent emissions if fully combusted or oxidized, excluding the amounts: (A) Supplied to covered entities under (a) through (d) of this subsection; and (B) delivered to opt-in entities.

(2) A person is a covered entity as of the beginning of the second compliance period and all subsequent compliance periods if the person reported emissions under RCW 70A.15.2200 or provided emissions data as required by this chapter for any calendar year from 2023 through 2025, where the person owns or operates ((a)):

(a) A waste to energy facility utilized by a county and city solid waste management program and the facility's emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent; or

(b) A district energy facility and the facility's emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent, but only if determined by the department by rule adopted under section 7 of this act.

(3)(a) A person is a covered entity beginning January 1, 2031, and all subsequent compliance periods if the person reported emissions under RCW 70A.15.2200 or provided emissions data as required by this chapter for any calendar year from 2027 through 2029, where the person owns or operates a:

(i) Landfill utilized by a county and city solid waste management program and the facility's emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent; or

(ii) Railroad company, as that term is defined in RCW 81.04.010, and the railroad company's emissions equal or exceed 25,000 metric tons of carbon dioxide equivalent.

(b) Subsection (a) of this subsection does not apply to owners or operators of landfills that:

(i) Capture at least 75 percent of the landfill gas generated by the decomposition of waste using methods under 40 C.F.R. Part 98, Subpart HH - Municipal Solid Waste landfills, and subsequent updates; and

(ii) Operate a program, individually or through partnership with another entity, that results in the production of renewable natural gas or electricity from landfill gas generated by the facility.

(c) It is the intent of the legislature to adopt a greenhouse gas reduction policy specific to landfills. If such a policy is not enacted by January 1, 2030, the requirements of this subsection (3) take full effect.

(4) When a covered entity reports, during a compliance period, emissions from a facility under RCW 70A.15.2200 that are below the thresholds specified in subsection (1) or (2) of this section, the covered entity continues to have a compliance obligation through the current compliance period. When a covered entity reports emissions below the threshold for each year during an entire compliance period, or has ceased all processes at the facility requiring reporting under RCW 70A.15.2200, the entity is no longer a covered entity as of the beginning of the subsequent compliance period unless the department provides notice at least 12 months before the end of the compliance period that the facility's emissions were within 10 percent of the threshold and that the person will continue to be designated as a covered entity in order to ensure equity among all covered entities. Whenever a covered entity ceases to be a covered entity, the department shall notify the appropriate policy and fiscal committees of the legislature of the name of the entity and the reason the entity is no longer a covered entity.

(5) For types of emission sources described in subsection (1) of this section that begin or modify operation after January 1, 2023, and types of emission sources described in subsection (2) of this section that begin or modify operation after 2027, coverage under the program starts in the calendar year in which emissions from the source exceed the applicable thresholds in subsection (1) or (2) of this section, or upon formal notice from the department that the source is expected to exceed the applicable emissions threshold, whichever happens first. Sources meeting these conditions are required to transfer their first allowances on the first transfer deadline of the year following the year in which their emissions were equal to or exceeded the emissions threshold.

(6) For emission sources described in subsection (1) of this section that are in operation or otherwise active between 2015 and 2019 but were not required to report emissions for those years under RCW 70A.15.2200 for the reporting periods between 2015 and 2019, coverage under the program starts in the calendar year following the year in which emissions from the source exceed the applicable thresholds in subsection (1) of this section as reported pursuant to RCW 70A.15.2200 or provided as required by this chapter, or upon formal notice from the department that the source is expected to exceed the applicable emissions threshold for the first year that source is required to report emissions, whichever happens first. Sources meeting these criteria are required to transfer their first allowances on the first transfer deadline of the year following the year in which their emissions, as reported under RCW 70A.15.2200 or provided as required by this chapter, were equal to or exceeded the emissions threshold.

(7) The following emissions are exempt from coverage in the program, regardless of the emissions reported under RCW 70A.15.2200 or provided as required by this chapter:

(a) Emissions from the combustion of aviation fuels;

(b) Emissions from watercraft fuels supplied in Washington that are combusted outside of Washington;

(c) Emissions from a coal-fired electric generation facility exempted from additional greenhouse gas limitations, requirements, or performance standards under RCW 80.80.110;

(d) Carbon dioxide emissions from the combustion of biomass or biofuels;

(e)(i) Motor vehicle fuel or special fuel that is used exclusively for agricultural purposes by a farm fuel user. This exemption is available only if a buyer of motor vehicle fuel or special fuel provides the seller with an exemption certificate in a form and manner prescribed by the department. For the purposes of this subsection, "agricultural purposes" and "farm fuel user" have the same meanings as provided in RCW 82.08.865.

(ii) The department must determine a method for expanding the exemption provided under (e)(i) of this subsection to include fuels used for the purpose of transporting agricultural products on public highways. The department must maintain this expanded exemption for a period of five years, in order to provide the agricultural sector with a feasible transition period; and

(f) Emissions from facilities with North American industry classification system code 92811 (national security).

(8) The department shall not require multiple covered entities to have a compliance obligation for the same emissions. The department may by rule authorize refineries, fuel suppliers, facilities using natural gas, and natural gas utilities to provide by agreement for the assumption of the compliance obligation for fuel or natural gas supplied and combusted in the state. The department must be notified of such an agreement at least 12 months prior to the compliance obligation period for which the agreement is applicable.

(9)(a) The legislature intends to promote a growing and sustainable economy and to avoid leakage of emissions from manufacturing to other locations. The legislature further intends to see innovative new businesses locate and grow in Washington that contribute to Washington's prosperity and environmental objectives.

(b) Consistent with the intent of the legislature to avoid the leakage of emissions to other jurisdictions, in achieving the state's greenhouse gas limits in RCW 70A.45.020, the state, including lead agencies under chapter 43.21C RCW, shall pursue the limits in a manner that recognizes that the siting and placement of new or expanded best-in-class facilities with lower carbon emitting processes is in the economic and environmental interests of the state of Washington.

(c) In conducting a life-cycle analysis, if required, for new or expanded facilities that require review under chapter 43.21C RCW, a lead agency must evaluate and attribute any potential net cumulative greenhouse gas emissions resulting from the project as compared to other existing facilities or best available technology including best-in-class facilities and emerging lower carbon processes that supply the same product or end use. The department may adopt rules to determine the appropriate threshold for applying this analysis.

(d) Covered emissions from an entity that is or will be a covered entity under this chapter may not be the basis for denial of a permit for a new or expanded facility. Covered emissions must be included in the analysis undertaken pursuant to (c) of this subsection. Nothing in this subsection requires a lead agency or a permitting agency to approve or issue a permit to a permit applicant, including to a new or expanded fossil fuel project.

(e) A lead agency under chapter 43.21C RCW or a permitting agency shall allow a new or expanded facility that is a covered entity or opt-in entity to satisfy a mitigation requirement for its covered emissions under this chapter ((316, Laws of 2021)) and under any greenhouse gas emission mitigation requirements for covered emissions under chapter 43.21C RCW by submitting to the department the number of compliance instruments equivalent to its covered emissions during a compliance period.

NEW SECTION.  Sec. 7. A new section is added to chapter 70A.65 RCW to read as follows:

(1)(a) By June 1, 2026, the department must by rule determine whether to regulate district energy facilities under this chapter through some combination of the following:

(i) As covered entities as of the beginning of the second compliance period as specified in RCW 70A.65.080(2)(b);

(ii) As covered entities as of the date later than the beginning of the second compliance period;

(iii) In a manner comparable to emissions-intensive, trade-exposed facilities subject to RCW 70A.65.110;

(iv) In a manner comparable to the regulation of natural gas utilities under RCW 70A.65.130; or

(v) By some other method.

(b) The department may adopt rules that achieve any of the outcomes specified in (a) of this subsection with respect to district energy facilities and may allocate allowances to such facilities consistent with its determination under (a) of this subsection.

(2) To allow the department to adopt a rule under this section, the department may demand information from a district energy facility consistent with RCW 70A.65.110(9).

--- END ---