State Building Code.
The State Building Code (Code) establishes minimum performance standards and requirements for construction and construction materials in the state, consistent with accepted standards of engineering, fire, and life safety. The Code comprises a number of model codes and standards, developed and published by international and national organizations, which are adopted by reference in the State Building Code Act (Act). Model codes and standards adopted in the Act include the International Building Code (IBC), the International Residential Code (IRC), and the State Energy Code.
The IBC establishes minimum requirements for all buildings except detached one- and two-family dwellings and townhouses up to three stories. The IRC comprises all building, plumbing, mechanical, fuel gas, and electrical requirements for one- and two-family dwellings and townhouses up to three stories.
The State Building Code Council (Council) is responsible for adopting, amending, and maintaining the model codes and standards adopted by reference in the Act. Amendments to the model codes and standards adopted by the Council are codified in the Washington Administrative Code. The Council reviews updated editions of each model code and standard every three years.
The IBC currently requires dwelling units to have a minimum of 190 square feet of habitable space and at least one room with no less than 120 square feet of net floor area.
National Healthy Housing Standard.
The National Healthy Housing Standard (Standard) is published by the National Center for Healthy Housing and the American Public Health Association. The Standard recommends minimum performance requirements for housing including: duties of owners and occupants; structure, facilities, plumbing, and space requirements; safety and personal security; lighting and electrical systems; thermal comfort, ventilation, and energy efficiency; moisture control, solid waste, and pest management; and chemical and radiological agents. The Standard recommends that each dwelling unit provide privacy and adequate space for sleeping and living and that every habitable room have a minimum floor area of 70 square feet.
Passive House.
Passive House is a voluntary standard for energy efficiency in buildings, which typically requires little energy for heating or cooling. Certified Passive House projects currently meet the requirements of the State Energy Code.
Development Regulations.
The Growth Management Act (GMA) is the comprehensive land use planning framework for counties and cities in Washington. Currently, 28 counties, and the cities within those counties, fully plan under the GMA. The GMA directs fully planning counties and cities to adopt internally consistent comprehensive land use plans. Comprehensive plans must be reviewed and, if necessary, revised every 10 years. Fully planning counties and cities also must adopt development regulations to implement their comprehensive plans. Development regulations include a variety of land use regulations, including zoning and subdivision ordinances, environmental procedures, design review and off-street parking requirements, and bulk, density coverage, and setback limitations.
Limitations on Off-Street Parking Requirements.
The GMA contains limitations on the ability of fully planning counties and cities to establish minimum residential parking requirements for certain types of housing, including:
State Building Code.
The Council must convene two technical advisory groups to recommend changes to the Code. The first technical advisory group must recommend additions or amendments to rules or codes that are necessary to apply the IRC to multiplex housing and exempt multiplex housing from the IBC. The recommendations must include those code changes necessary to ensure public health and safety in multifamily housing under the IRC and may include life safety systems for multiplex housing in the IBC.
The second technical advisory group must recommend amendments to the IBC that would allow for a minimum dwelling unit size that is less than the requirements for efficiency dwelling units in the IBC. The second technical advisory group must consider aligning the Code sections related to interior environment with the relevant sections of the Standard. When developing the recommendations, the technical advisory group must review the differences between the Code and the Standard and allow experts in public health and fire safety to comment during the process.
Both technical advisory groups must provide their recommendations to the Council in time for the Council to adopt or amend rules or codes as necessary for implementation in the 2024 IBC. The Council must take action to adopt additions and amendments to rules or codes as necessary by July 1, 2026.
The Office of Regulatory Innovation and Assistance (ORIA) must contract with a qualified external consultant or entity to develop a standard plan set demonstrating a prescriptive compliance pathway that will meet or exceed all energy code regulations for residential housing subject to the IRC. The standard plan set may be used by local governments and building industries. In developing the standard plan set, the consultant must seek feedback from cities, counties, building industries, and building officials. The standard plan set must be completed by June 30, 2025.
Development Regulations.
For retrofits of existing buildings to be used for residential housing, a city or county must allow the portion of exterior wall assemblies that include insulation to project up to an additional 8 inches into the setbacks on all sides. If a nonconforming building already projects into setbacks, a city or county must allow the portion of exterior wall assemblies that include insulation to project up to an additional 8 inches into the setbacks on all sides if the building is to be used for residential housing.
For retrofits of existing buildings to be used for residential housing, gross floor area must be measured from the interior face of the exterior walls, which includes drywall, as typically depicted on the architectural floor plans.
Cities and counties are not prohibited from applying the Code when allowing the required modifications to setbacks and gross floor area.
Passive House.
For new residential construction meeting passive house requirements:
For new construction and the retrofit of existing buildings meeting passive house requirements, a city or county must allow residential housing to exceed the maximum allowable roof height by 8 inches to accommodate additional insulation.
Cities and counties are not prohibited from applying the Code when allowing the required modifications to setbacks, height limits, and gross floor area.
Limitations on Off-Street Parking Requirements.
A city or county may not require off-street parking as a condition of permitting a residential project meeting passive house requirements.
A city or county may not require off-street parking as a condition of permitting a residential project if compliance with tree retention or protection requirements would otherwise make a proposed residential development or redevelopment infeasible.
The substitute bill requires the Council to convene a technical advisory group to recommend changes necessary to allow a minimum dwelling unit size that is less than the requirements for efficiency dwelling units in the IBC and removes the requirement in the original bill that the minimum size must be less than 190 square feet but at least 70 square feet.
The substitute bill specifies that cities and counties are not prohibited from applying the Code when allowing the required modifications to setbacks, height limits, and gross floor area for retrofits of existing buildings to be used for residential housing and for new residential construction meeting passive house requirements.
The substitute bill modifies the definition of "passive house requirements" to mean the criteria for certification as a passive house by Phius or the international Passive House Institute.
(In support) This bill contains a variety of provisions to make building housing more efficient and more cost-effective. Making multifamily housing harder to build and encouraging single-family homes is rooted in racial discrimination. Multiplex housing has not always been covered by the IBC, and it was only changed to make it harder to build multifamily residences. Buildings with three to six units are not structurally very different than buildings with one or two units. Using the IRC for multiplexes does not compromise safety as multiplexes do not need to meet skyscraper standards. The building code is a barrier to middle housing. The building code also dictates how small is too small for a dwelling unit. Minimum dwelling unit sizes are not based on health and safety issues and were arbitrarily established when trying to ban certain types of housing, like rooming houses and single-room occupancies. Passive House is the most energy efficient standard in the world, even before energy generating measures, such as solar panels, are considered. Passive houses are not very much more expensive to build than regular housing, but development regulations make them more difficult to build. Inches matter in construction and affect the number and quality of units. The state needs housing for people and not parking for cars. In some areas, nearly every single-family home is required to be built with a two-car garage. Garages are expensive to build. This bill does not ban off-street parking but instead leaves it to the discretion of builders who build very energy efficient homes. Developers can choose to add parking where it makes sense and where the market demands.
(Opposed) None.
(Other) Balancing competing interests is a job most appropriate for local governments. Cities and counties generally support the sections related to changing the Code, including moving middle housing under the IRC. The Council has struggled to enact some types of regulations, and the language in the bill should be clarified. New housing of any type should not need modified setback requirements, and the language should clarify that the setback modifications are from the property line, not other buildings. Setback modifications should not be required if they would intrude on neighbors or create health and safety issues. Most households in the state have cars, and cities should be allowed to regulate parking. Rural roads have ditches, and counties need to be able to regulate parking as a safety concern. It would be very difficult to measure floor area from the interior wall, and it makes sense to allow extra area on the outside instead.
(In support) Representative Davina Duerr, prime sponsor; David Neiman, Neiman Taber Architects; Rob Harrison; Dan Bertolet, Sightline Institute; Ryan Donohue, Habitat for Humanity Seattle—King and Kittitas Counties; Kevin Maas; Alex Hur, Master Builders Association of King and Snohomish Counties; Markus Johnson; Bryce Yadon, Futurewise; Matt Hutchins; and Cary Westerbeck.
The second substitute bill:
(In support) The bill would permit the use of the International Residential Code for smaller structures to improve housing stock in the state. The bill would allow multiplexes to be built using residential codes. More homes could be delivered to lower-income families. This will address the housing crisis. Retrofitting, expanding, and updating homes is better than demolishing them. This would reduce construction costs and support sustainable design. The bill would update overly onerous building codes that apply to middle housing.
(Opposed) None.
Ryan Donohue, Habitat for Humanity Seattle-King and Kittitas Counties; Ruth Williams; Bill Stauffacher, Building Industry Association of Washington; Bryce Yadon, Futurewise; and Dan Bertolet, Sightline Institute.