You must obtain written certification from the building owner of any building with a powered platform installation that was completed or had major modification done after July 23, 1990, that the building and equipment meets the requirements of new installations-buildings, WAC
296-870-600 and new installations-equipment, WAC
296-870-700 of this chapter.
Note: | The building owner needs to base the certification on: |
| 1. The field test of the installation done before it is first placed into service or following any major modification to an existing installation; |
| and |
| 2. All other relevant available information, including but not limited to: |
| a. Test data; |
| b. Equipment specifications; |
| c. Verification by a registered professional engineer. |
You must obtain written certification from the building owner that the installation:
(1) Has been inspected, tested, and maintained as required by inspection, testing, and maintenance, WAC
296-870-300 of this chapter;
and
(2) All fall protection anchorages meet the requirements of Appendix C—Personal fall arrest system, WAC
296-24-88050, found in the General safety and health standards, chapter
296-24 WAC.
[Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050. WSR 15-23-086, § 296-870-20005, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050,
47.17.060. WSR 06-19-075, § 296-870-20005, filed 9/19/06, effective 1/1/07.]