PERMANENT RULES
Date of Adoption: April 20, 2000.
Purpose: To define when an emergency logic and accuracy test should be conducted.
Citation of Existing Rules Affected by this Order: Amending WAC 434-334-090, 434-334-110, 434-334-140, 434-334-160, and 434-334-165.
Statutory Authority for Adoption: RCW 29.33.350.
Adopted under notice filed as WSR 00-05-094 on February 16, 2000.
Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.
Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.
Number of Sections Adopted on the Agency's Own Initiative: New 1, Amended 5, Repealed 0.
Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 1, Amended 5, Repealed 0.
Number of Sections Adopted Using Negotiated Rule Making: New 1, Amended 5, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 0, Repealed 0. Effective Date of Rule: Thirty-one days after filing.
April 20, 2000
Donald F. Whiting
Assistant Secretary of State
OTS-3491.1
AMENDATORY SECTION(Amending WSR 99-08-115, filed 4/7/99,
effective 5/8/99)
WAC 434-334-090
Logic and accuracy test
certification -- State primary and general election.
The county auditor or deputy, and, if present, the office of the secretary of state representative and any political party observers shall certify that the test has been conducted in accordance with RCW 29.33.350. Copies of this certification shall be retained by the secretary of state and the county auditor. All programming materials, test results, and test ballots shall be securely sealed until the day of the primary or election. These items may be sealed and stored separately.
If, for any reason, any changes are made to the ballot counting programming after the official logic and accuracy test, an emergency logic and accuracy test must be conducted pursuant to WAC 434-334-082.
[Statutory Authority: RCW 29.33.350. 99-08-115, § 434-334-090, filed 4/7/99, effective 5/8/99. Statutory Authority: RCW 29.04.080, 29.04.210, 29.36.150 and 29.79.200. 97-21-045, recodified as § 434-334-090, filed 10/13/97, effective 11/13/97. Statutory Authority: 1990 c 59. 92-12-083, § 434-34-090, filed 6/2/92, effective 7/3/92.]
The county auditor or deputy and any political party observers, if present, shall certify that the test has been conducted in accordance with RCW 29.33.350. Copies of this certification shall be retained by the county auditor. All programming materials, official test results, and test ballots shall be securely sealed until the day of the primary or election. These items may be sealed and stored separately.
If, for any reason, any changes are made to the ballot counting programming after the official logic and accuracy test, an emergency logic and accuracy test must be conducted pursuant to WAC 434-334-082.
[Statutory Authority: RCW 29.33.350. 99-08-115, § 434-334-110, filed 4/7/99, effective 5/8/99. Statutory Authority: RCW 29.04.080, 29.04.210, 29.36.150 and 29.79.200. 97-21-045, recodified as § 434-334-110, filed 10/13/97, effective 11/13/97. Statutory Authority: 1990 c 59. 92-12-083, § 434-34-110, filed 6/2/92, effective 7/3/92.]
Prior to all official logic and accuracy tests, a test must be conducted by each county employing a punchcard balloting system to confirm the ballot stock to be used in the election meets system specifications for card weight, thickness and length. The test should also confirm that the prepunches and voting response areas are being read properly by the ballot counter.
[]
For optical scan voting systems:
(1) "Voting response area" means the area defined by ballot instructions which the voter places their mark to indicate their vote.
(2) "Scanning area" means the portions of each ballot that the system scans in order to read the vote marks made by voters.
(3) "Ballot marking code" means the coded patterns printed on ballots intended to identify ballot styles to the ballot counting system.
[Statutory Authority: RCW 29.33.350. 99-08-115, § 434-334-140, filed 4/7/99, effective 5/8/99.]
Prior to all official logic and accuracy tests, a test shall be conducted by each county employing an optical scan balloting system to confirm that the voting response areas printed on all ballot faces are aligned properly with the scanning area of the ballot counter. This test should also confirm that all ballot marking codes are being properly interpreted by the ballot counter.
[Statutory Authority: RCW 29.33.350. 99-08-115, § 434-334-160, filed 4/7/99, effective 5/8/99.]
Prior to the official logic and accuracy test each county
employing an optical scan balloting system shall thoroughly test
all programming and system components. The test must at least
verify the office programming by thoroughly testing each
individual office, ((test)) testing the ballot style logic to
insure that all offices are included on the intended ballot
faces, and verify that the program is accumulating all offices.
The county auditor or deputy shall certify that these tests have
been completed prior to the official logic and accuracy test.
[Statutory Authority: RCW 29.33.350. 99-08-115, § 434-334-165, filed 4/7/99, effective 5/8/99.]