Effective Date of Rule: Thirty-one days after filing.
Purpose: This rule-making order amends chapter 16-663 WAC, Service agents -- Reporting, test procedures, standards and calibration of weighing and measuring devices, by deleting an obsolete service agent registration fee.
Citation of Existing Rules Affected by this Order: Amending WAC 16-663-120, 16-663-130, and 16-663-140.
Statutory Authority for Adoption: Chapters 19.94 and 34.05 RCW.
Adopted under notice filed as WSR 08-15-111 on July 18, 2008.
Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 1, Repealed 0.
Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.
Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 2, Repealed 0.
Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 0, Repealed 0.
Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 3, Repealed 0.
Date Adopted: September 25, 2008.
Mary A. Martin Toohey
AMENDATORY SECTION(Amending WSR 00-22-072, filed 10/30/00, effective 11/30/00)
WAC 16-663-120 Registration, certification and standards. (1) Service agents and servicepersons who intend to provide service that permits a weighing or measuring device to be placed back into commercial service must register with the department annually. Service agents and servicepersons must register on a form provided by the department annually. The fee for registration is ((
eighty dollars per service
person)) specified in RCW 19.94.2582. This registration
requirement does not apply to city sealers.
(2) Service agents and servicepersons registering with the department will specifically state the types of devices they will be placing in service. Such a statement is the agent's or person's certification that they are knowledgeable of the requirements of the state and possess proper and certified equipment and standards to perform the services.
(3) The registered service agent or serviceperson shall submit a copy of their tag or label, seal or seal press identification mark to the department at time of registration.
(4) The department will issue an official registration certification for each service agent and serviceperson whose application is approved. Official registration certificates are valid for a period of one year from date of registration.
(5) For requests that are denied the department will provide reasons, in writing, for the denial and refund payment.
[Statutory Authority: RCW 19.94.010, 19.94.190. 00-22-072, § 16-663-120, filed 10/30/00, effective 11/30/00.]
(2) Submission of standards for inspection. All standards used for servicing, repairing and/or calibrating commercial weighing and measuring devices must be submitted at least every two years for examination and certification. The standards will be submitted to the state's metrology laboratory or a laboratory of any state in which a reciprocity agreement has been entered. The state metrology laboratory examines and certifies standards using the current version of National Institute of Standards and Technology Handbook 105.
(3) Recognition of out-of-state certification of any standard that has been inspected and examined by any state or agency in which the director has entered a reciprocity agreement will be considered correct if said examination is within the previous two-year period. Proof of inspection must be submitted to the department with the registration application.
(4) Proof of certification shall be maintained by the owner of the standards and be kept with the standards during normal usage for the purpose of inspection by the director or authorized representative.
[Statutory Authority: RCW 19.94.010, 19.94.190. 00-22-072, § 16-663-130, filed 10/30/00, effective 11/30/00.]
(a) Applying an adhesive tag or label in a conspicuous location on the device; or
(b) Using a distinctive security seal or seal press impression.
(2) The adhesive tag or label shall legibly show at least the serviceperson registration number, business telephone number and date of service.
(3) Any security seal or seal press used to comply with subsection (1) of this section shall identify the individual registered serviceperson applying the seal.
(4) The registered service agent or serviceperson shall submit a copy of the tag or label, seal or seal press identification mark to the department at time of registration.
(5) The above requirements will be effective May 1,
[Statutory Authority: RCW 19.94.010, 19.94.190. 00-22-072, § 16-663-140, filed 10/30/00, effective 11/30/00.]