WSR 11-02-014

PERMANENT RULES

DEPARTMENT OF REVENUE


[ Filed December 29, 2010, 8:34 a.m. , effective January 1, 2011 ]


     Effective Date of Rule: January 1, 2011.

     Other Findings Required by Other Provisions of Law as Precondition to Adoption or Effectiveness of Rule: The stumpage value rule is required by statute (RCW 84.33.091) to be effective on January 1, 2011.

     Purpose: WAC 458-40-660 contains the stumpage values used by harvesters of timber to calculate the timber excise tax. This rule is being revised to provide the stumpage values to be used during the first half of 2011.

     Citation of Existing Rules Affected by this Order: Amending WAC 458-40-660 Timber excise tax -- Stumpage value tables -- Stumpage value adjustments.

     Statutory Authority for Adoption: RCW 82.01.060(2), 82.32.300, and 84.33.096.

     Other Authority: RCW 84.33.091.

      Adopted under notice filed as WSR 10-22-063 on October 29, 2010.

     A final cost-benefit analysis is available by contacting Mark Bohe, P.O. Box 47453, Olympia, WA 98504-7453, phone (360) 534-1574, fax (360) 534-1606, e-mail markbohe@dor.wa.gov.

     Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 1, Repealed 0.

     Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0;      Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 0, Repealed 0.

     Date Adopted: December 29, 2010.

Alan R. Lynn

Rules Coordinator

OTS-3743.2


AMENDATORY SECTION(Amending WSR 10-14-095, filed 7/6/10, effective 7/6/10)

WAC 458-40-660   Timber excise tax--Stumpage value tables -- Stumpage value adjustments.   (1) Introduction. This rule provides stumpage value tables and stumpage value adjustments used to calculate the amount of a harvester's timber excise tax.

     (2) Stumpage value tables. The following stumpage value tables are used to calculate the taxable value of stumpage harvested from ((July)) January 1 through ((December 31, 2010)) June 30, 2011:


((TABLE 1—Proposed Stumpage Value Table
Stumpage Value Area 1

July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$267

$260

$253

$246

$239
2 267 260 253 246 239
3 267 260 253 246 239
4 267 260 253 246 239

Western Redcedar(2)

RC

1

495

488

481

474

467

Western Hemlock(3)
WH 1 230 223 216 209 202
2 230 223 216 209 202
3 230 223 216 209 202
4 230 223 216 209 202

Red Alder

RA

1

290

283

276

269

262
2 261 254 247 240 233

Black Cottonwood

BC

1

15

8

1

1

1

Other Hardwood

OH

1

171

164

157

150

143

Douglas-Fir Poles & Piles

DFL

1

547

540

533

526

519

Western Redcedar Poles

RCL

1

1273

1266

1259

1252

1245

Chipwood(4)

CHW

1

3

2

1

1

1
RC Shake & Shingle Blocks(5)
RCS

1

144

137

130

123

116

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.


TABLE 2—Proposed Stumpage Value Table
Stumpage Value Area 2
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$282

$275

$268

$261

$254
2 282 275 268 261 254
3 282 275 268 261 254
4 247 240 233 226 219

Western Redcedar(2)

RC

1

495

488

481

474

467

Western Hemlock(3)

WH

1
239 232 225 218 211
2 239 232 225 218 211
3 239 232 225 218 211
4 239 232 225 218 211

Red Alder

RA

1

290

283

276

269

262
2 261 254 247 240 233

Black Cottonwood

BC

1

15

8

1

1

1

Other Hardwood

OH

1

171

164

157

150

143

Douglas-Fir Poles & Piles

DFL

1

547

540

533

526

519

Western Redcedar Poles

RCL

1

1273

1266

1259

1252

1245

Chipwood(4)

CHW

1

3

2

1

1

1

RC Shake & Shingle Blocks(5)

RCS

1

144

137

130

123

116

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.

TABLE 3—Proposed Stumpage Value Table
Stumpage Value Area 3
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$232

$225

$218

$211

$204
2 232 225 218 211 204
3 232 225 218 211 204
4 232 225 218 211 204

Western Redcedar(3)

RC

1

495

488

481

474

467

Western Hemlock(4)

WH

1
227 220 213 206 199
2 227 220 213 206 199
3 227 220 213 206 199
4 227 220 213 206 199

Red Alder

RA

1

290

283

276

269

262
2 261 254 247 240 233

Black Cottonwood

BC

1

15

8

1

1

1

Other Hardwood

OH

1

171

164

157

150

143

Douglas-Fir Poles & Piles

DFL

1

547

540

533

526

519

Western Redcedar Poles

RCL

1

1273

1266

1259

1252

1245

Chipwood(5)

CHW

1

3

2

1

1

1

RC Shake & Shingle Blocks(6)

RCS

1

144

137

130

123

116

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.


TABLE 4—Proposed Stumpage Value Table
Stumpage Value Area 4
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$307

$300

$293

$286

$279
2 307 300 293 286 279
3 307 300 293 286 279
4 283 276 269 262 255

Lodgepole Pine

LP

1

79

72

65

58

51

Ponderosa Pine

PP

1

76

69

62

55

48
2 61 54 47 40 33

Western Redcedar(3)

RC

1

495

488

481

474

467

Western Hemlock(4)

WH

1
239 232 225 218 211
2 239 232 225 218 211
3 239 232 225 218 211
4 239 232 225 218 211

Red Alder

RA

1

290

283

276

269

262
2 261 254 247 240 233

Black Cottonwood

BC

1

15

8

1

1

1

Other Hardwood

OH

1

171

164

157

150

143

Douglas-Fir Poles & Piles

DFL

1

547

540

533

526

519

Western Redcedar Poles

RCL

1

1273

1266

1259

1252

1245

Chipwood(5)

CHW

1

3

2

1

1

1

RC Shake & Shingle Blocks(6)

RCS

1

144

137

130

123

116

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 5—Proposed Stumpage Value Table
Stumpage Value Area 5
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$269

$262

$255

$248

$241
2 269 262 255 248 241
3 269 262 255 248 241
4 269 262 255 248 241

Lodgepole Pine

LP

1

79

72

65

58

51

Ponderosa Pine

PP

1

76

69

62

55

48
2 61 54 47 40 33

Western Redcedar(3)

RC

1

495

488

481

474

467

Western Hemlock(4)

WH

1
215 208 201 194 187
2 215 208 201 194 187
3 215 208 201 194 187
4 215 208 201 194 187

Red Alder

RA

1

290

283

276

269

262
2 261 254 247 240 233

Black Cottonwood

BC

1

15

8

1

1

1

Other Hardwood

OH

1

171

164

157

150

143

Douglas-Fir Poles & Piles

DFL

1

547

540

533

526

519

Western Redcedar Poles

RCL

1

1273

1266

1259

1252

1245

Chipwood(5)

CHW

1

3

2

1

1

1

RC Shake & Shingle Blocks(6)

RCS

1

144

137

130

123

116

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 6—Proposed Stumpage Value Table
Stumpage Value Area 6
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$86

$79

$72

$65

$58

Lodgepole Pine

LP

1

79

72

65

58

51

Ponderosa Pine

PP

1

76

69

62

55

48
2 61 54 47 40 33

Western Redcedar(3)

RC

1

331

324

317

310

303

True Firs and Spruce(4)

WH

1

81

74

67

60

53

Western White Pine

WP

1

55

48

41

34

27

Hardwoods

OH

1

1

1

1

1

1

Western Redcedar Poles

RCL

1

331

324

317

310

303

Small Logs(5)

SML

1

10

9

8

7

6

Chipwood(5)

CHW

1

1

1

1

1

1

RC Shake & Shingle Blocks(6)

RCS


1


144


137


130


123


116


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 7—Proposed Stumpage Value Table
Stumpage Value Area 7
July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$86

$79

$72

$65

$58

Lodgepole Pine

LP

1

79

72

65

58

51

Ponderosa Pine

PP

1

76

69

62

55

48
2 61 54 47 40 33

Western Redcedar(3)

RC

1

331

324

317

310

303

True Firs and Spruce(4)

WH

1

81

74

67

60

53

Western White Pine

WP

1

55

48

41

34

27

Hardwoods

OH

1

1

1

1

1

1

Western Redcedar Poles

RCL

1

331

324

317

310

303

Small Logs(5)

SML

1

10

9

8

7

6

Chipwood(5)

CHW

1

1

1

1

1

1

RC Shake & Shingle

Blocks(6)


RCS


1


144


137


130


123


116


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 8—Proposed Stumpage Value Table
Stumpage Value Area 10

July 1 through December 31, 2010

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$293

$286

$279

$272

$265
2 293 286 279 272 265
3 293 286 279 272 265
4 269 262 255 248 241

Lodgepole Pine

LP

1

79

72

65

58

51

Ponderosa Pine

PP

1

76

69

62

55

48
2 61 54 47 40 33

Western Redcedar(3)

RC

1

481

474

467

460

453

Western Hemlock(4)

WH

1
225 218 211 204 197
2 225 218 211 204 197
3 225 218 211 204 197
4 225 218 211 204 197

Red Alder

RA

1

276

269

262

255

248
2 247 240 233 226 219

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

157

150

143

136

129

Douglas-Fir Poles & Piles

DFL

1

533

526

519

512

505

Western Redcedar Poles

RCL

1

1259

1252

1245

1238

1231

Chipwood(5)

CHW

1

3

2

1

1

1

RC Shake & Shingle Blocks(6)

RCS

1

144

137

130

123

116

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.))

TABLE 1—Proposed Stumpage Value Table
Stumpage Value Area 1

January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$312

$305

$298

$291

$284
2 312 305 298 291 284
3 312 305 298 291 284
4 312 305 298 291 284

Western Redcedar(2)

RC

1

567

560

553

546

539

Western Hemlock(3)
WH 1 286 279 272 265 258
2 286 279 272 265 258
3 286 279 272 265 258
4 286 279 272 265 258

Red Alder

RA

1

339

332

325

318

311
2 300 293 286 279 272

Black Cottonwood

BC

1

65

58

51

44

37

Other Hardwood

OH

1

196

189

182

175

168

Douglas-Fir Poles & Piles

DFL

1

624

617

610

603

596

Western Redcedar Poles

RCL

1

1215

1208

1201

1194

1187

Chipwood(4)

CHW

1

5

4

3

2

1
RC Shake & Shingle Blocks(5)
RCS

1

164

157

150

143

136

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.


TABLE 2—Proposed Stumpage Value Table
Stumpage Value Area 2
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$327

$320

$313

$306

$299
2 327 320 313 306 299
3 327 320 313 306 299
4 302 295 288 281 274

Western Redcedar(2)

RC

1

567

560

553

546

539

Western Hemlock(3)

WH

1
313 306 299 292 285
2 313 306 299 292 285
3 313 306 299 292 285
4 313 306 299 292 285

Red Alder

RA

1

339

332

325

318

311
2 300 293 286 279 272

Black Cottonwood

BC

1

65

58

51

44

37

Other Hardwood

OH

1

196

189

182

175

168

Douglas-Fir Poles & Piles

DFL

1

624

617

610

603

596

Western Redcedar Poles

RCL

1

1215

1208

1201

1194

1187

Chipwood(4)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(5)

RCS

1

164

157

150

143

136

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.

TABLE 3—Proposed Stumpage Value Table
Stumpage Value Area 3
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$345

$338

$331

$324

$317
2 345 338 331 324 317
3 345 338 331 324 317
4 315 308 301 294 287

Western Redcedar(3)

RC

1

567

560

553

546

539

Western Hemlock(4)

WH

1
293 286 279 272 265
2 293 286 279 272 265
3 293 286 279 272 265
4 293 286 279 272 265

Red Alder

RA

1

339

332

325

318

311
2 300 293 286 279 272

Black Cottonwood

BC

1

65

58

51

44

37

Other Hardwood

OH

1

196

189

182

175

168

Douglas-Fir Poles & Piles

DFL

1

624

617

610

603

596

Western Redcedar Poles

RCL

1

1215

1208

1201

1194

1187

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50



(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.


TABLE 4—Proposed Stumpage Value Table
Stumpage Value Area 4
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$341

$334

$327

$320

$313
2 341 334 327 320 313
3 341 334 327 320 313
4 327 320 313 306 299

Lodgepole Pine

LP

1

114

107

100

93

86

Ponderosa Pine

PP

1

141

134

127

120

113
2 120 113 106 99 92

Western Redcedar(3)

RC

1

567

560

553

546

539

Western Hemlock(4)

WH

1
293 286 279 272 265
2 293 286 279 272 265
3 293 286 279 272 265
4 293 286 279 272 265

Red Alder

RA

1

339

332

325

318

311
2 300 293 286 279 272

Black Cottonwood

BC

1

65

58

51

44

37

Other Hardwood

OH

1

196

189

182

175

168

Douglas-Fir Poles & Piles

DFL

1

624

617

610

603

596

Western Redcedar Poles

RCL

1

1215

1208

1201

1194

1187

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 5—Proposed Stumpage Value Table
Stumpage Value Area 5
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$339

$332

$325

$318

$311
2 339 332 325 318 311
3 339 332 325 318 311
4 328 321 314 307 300

Lodgepole Pine

LP

1

114

107

100

93

86

Ponderosa Pine

PP

1

141

134

127

120

113
2 120 113 106 99 92

Western Redcedar(3)

RC

1

567

560

553

546

539

Western Hemlock(4)

WH

1
275 268 261 254 247
2 275 268 261 254 247
3 275 268 261 254 247
4 275 268 261 254 247

Red Alder

RA

1

339

332

325

318

311
2 300 293 286 279 272

Black Cottonwood

BC

1

65

58

51

44

37

Other Hardwood

OH

1

196

189

182

175

168

Douglas-Fir Poles & Piles

DFL

1

624

617

610

603

596

Western Redcedar Poles

RCL

1

1215

1208

1201

1194

1187

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 6—Proposed Stumpage Value Table
Stumpage Value Area 6
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$127

$120

$113

$106

$99

Lodgepole Pine

LP

1

114

107

100

93

86

Ponderosa Pine

PP

1

141

134

127

120

113
2 120 113 106 99 92

Western Redcedar(3)

RC

1

377

370

363

356

349

True Firs and Spruce(4)

WH

1

117

110

103

96

89

Western White Pine

WP

1

94

87

80

73

66

Hardwoods

OH

1

23

16

9

2

1

Western Redcedar Poles

RCL

1

377

370

363

356

349

Small Logs(5)

SML

1

17

16

15

14

13

Chipwood(5)

CHW

1

2

1

1

1

1

RC Shake & Shingle Blocks(6)

RCS


1


164


157


150


143


136


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 7—Proposed Stumpage Value Table
Stumpage Value Area 7
January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$127

$120

$113

$106

$99

Lodgepole Pine

LP

1

114

107

100

93

86

Ponderosa Pine

PP

1

141

134

127

120

113
2 120 113 106 99 92

Western Redcedar(3)

RC

1

377

370

363

356

349

True Firs and Spruce(4)

WH

1

117

110

103

96

89

Western White Pine

WP

1

94

87

80

73

66

Hardwoods

OH

1

23

16

9

2

1

Western Redcedar Poles

RCL

1

377

370

363

356

349

Small Logs(5)

SML

1

17

16

15

14

13

Chipwood(5)

CHW

1

2

1

1

1

1

RC Shake & Shingle

Blocks(6)


RCS


1


164


157


150


143


136


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 8—Proposed Stumpage Value Table
Stumpage Value Area 10

January 1 through June 30, 2011

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$327

$320

$313

$306

$299
2 327 320 313 306 299
3 327 320 313 306 299
4 313 306 299 292 285

Lodgepole Pine

LP

1

114

107

100

93

86

Ponderosa Pine

PP

1

141

134

127

120

113
2 120 113 106 99 92

Western Redcedar(3)

RC

1

553

546

539

532

525

Western Hemlock(4)

WH

1
279 272 265 258 251
2 279 272 265 258 251
3 279 272 265 258 251
4 279 272 265 258 251

Red Alder

RA

1

325

318

311

304

297
2 286 279 272 265 258

Black Cottonwood

BC

1

51

44

37

30

23

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles & Piles

DFL

1

610

603

596

589

582

Western Redcedar Poles

RCL

1

1201

1194

1187

1180

1173

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

     (3) Harvest value adjustments. The stumpage values in subsection (2) of this rule for the designated stumpage value areas are adjusted for various logging and harvest conditions, subject to the following:

     (a) No harvest adjustment is allowed for special forest products, chipwood, or small logs.

     (b) Conifer and hardwood stumpage value rates cannot be adjusted below one dollar per MBF.

     (c) Except for the timber yarded by helicopter, a single logging condition adjustment applies to the entire harvest unit. The taxpayer must use the logging condition adjustment class that applies to a majority (more than 50%) of the acreage in that harvest unit. If the harvest unit is reported over more than one quarter, all quarterly returns for that harvest unit must report the same logging condition adjustment. The helicopter adjustment applies only to the timber volume from the harvest unit that is yarded from stump to landing by helicopter.

     (d) The volume per acre adjustment is a single adjustment class for all quarterly returns reporting a harvest unit. A harvest unit is established by the harvester prior to harvesting. The volume per acre is determined by taking the volume logged from the unit excluding the volume reported as chipwood or small logs and dividing by the total acres logged. Total acres logged does not include leave tree areas (RMZ, UMZ, forested wetlands, etc.,) over 2 acres in size.

     (e) A domestic market adjustment applies to timber which meet the following criteria:

     (i) Public timber -- Harvest of timber not sold by a competitive bidding process that is prohibited under the authority of state or federal law from foreign export may be eligible for the domestic market adjustment. The adjustment may be applied only to those species of timber that must be processed domestically. According to type of sale, the adjustment may be applied to the following species:

     Federal Timber Sales: All species except Alaska-cedar. (Stat. Ref. - 36 C.F.R. 223.10)

     State, and Other Nonfederal, Public Timber Sales: Western Redcedar only. (Stat. Ref. - 50 U.S.C. appendix 2406.1)

     (ii) Private timber -- Harvest of private timber that is legally restricted from foreign export, under the authority of The Forest Resources Conservation and Shortage Relief Act (Public Law 101-382), (16 U.S.C. Sec. 620 et seq.); the Export Administration Act of 1979 (50 U.S.C. App. 2406(i)); a Cooperative Sustained Yield Unit Agreement made pursuant to the act of March 29, 1944 (16 U.S.C. Sec. 583-583i); or Washington Administrative Code (WAC 240-15-015(2)) is also eligible for the Domestic Market Adjustment.

     The following harvest adjustment tables apply from ((July)) January 1 through ((December 31, 2010)) June 30, 2011:


TABLE 9—Harvest Adjustment Table
Stumpage Value Areas 1, 2, 3, 4, 5, and 10

((July)) January 1 through ((December 31, 2010)) June 30, 2011


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of 30 thousand board feet or more per acre. $0.00
Class 2 Harvest of 10 thousand board feet to but not including 30 thousand board feet per acre. -$15.00
Class 3 Harvest of less than 10 thousand board feet per acre. -$35.00
II. Logging conditions
Class 1 Ground based logging a majority of the unit using tracked or wheeled vehicles or draft animals. $0.00
Class 2 Cable logging a majority of the unit using an overhead system of winch driven cables. -$50.00
Class 3 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. -$145.00
III. Remote island adjustment:
For timber harvested from a remote island -$50.00
IV. Thinning
Class 1 A limited removal of timber described in WAC 458-40-610 (28) -$100.00

TABLE 10—Harvest Adjustment Table
Stumpage Value Areas 6 and 7
((July)) January 1 through ((December 31, 2010)) June 30, 2011


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of more than 8 thousand board feet per acre. $0.00
Class 2 Harvest of 8 thousand board feet per acre and less. -$8.00
II. Logging conditions
Class 1 The majority of the harvest unit has less than 40% slope. No significant rock outcrops or swamp barriers. $0.00
Class 2 The majority of the harvest unit has slopes between 40% and 60%. Some rock outcrops or swamp barriers. -$50.00
Class 3 The majority of the harvest unit has rough, broken ground with slopes over 60%. Numerous rock outcrops and bluffs. -$75.00
Class 4 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. -$145.00
     Note: A Class 2 adjustment may be used for slopes less than 40% when cable logging is required by a duly promulgated forest practice regulation. Written documentation of this requirement must be provided by the taxpayer to the department of revenue.
III. Remote island adjustment:
For timber harvested from a remote island -$50.00

TABLE 11—Domestic Market Adjustment


Class Area Adjustment Applies Dollar Adjustment Per Thousand Board Feet Net Scribner Scale
Class 1: SVA's 1 through 6, and 10 $0.00
Class 2: SVA 7 $0.00

Note: The adjustment will not be allowed on special forest products.

     (4) Damaged timber. Timber harvesters planning to remove timber from areas having damaged timber may apply to the department of revenue for an adjustment in stumpage values. The application must contain a map with the legal descriptions of the area, an accurate estimate of the volume of damaged timber to be removed, a description of the damage sustained by the timber with an evaluation of the extent to which the stumpage values have been materially reduced from the values shown in the applicable tables, and a list of estimated additional costs to be incurred resulting from the removal of the damaged timber. The application must be received and approved by the department of revenue before the harvest commences. Upon receipt of an application, the department of revenue will determine the amount of adjustment to be applied against the stumpage values. Timber that has been damaged due to sudden and unforeseen causes may qualify.

     (a) Sudden and unforeseen causes of damage that qualify for consideration of an adjustment include:

     (i) Causes listed in RCW 84.33.091; fire, blow down, ice storm, flood.

     (ii) Others not listed; volcanic activity, earthquake.

     (b) Causes that do not qualify for adjustment include:

     (i) Animal damage, root rot, mistletoe, prior logging, insect damage, normal decay from fungi, and pathogen caused diseases; and

     (ii) Any damage that can be accounted for in the accepted normal scaling rules through volume or grade reductions.

     (c) The department of revenue will not grant adjustments for applications involving timber that has already been harvested but will consider any remaining undisturbed damaged timber scheduled for removal if it is properly identified.

     (d) The department of revenue will notify the harvester in writing of approval or denial. Instructions will be included for taking any adjustment amounts approved.

     (5) Forest-derived biomass, has a $0/ton stumpage value.

[Statutory Authority: RCW 82.01.060(2), 82.32.300, 84.33.096, and 84.33.091. 10-14-095, § 458-40-660, filed 7/6/10, effective 7/6/10; 10-02-032, § 458-40-660, filed 12/29/09, effective 1/1/10; 09-14-109, § 458-40-660, filed 6/30/09, effective 7/1/09; 09-02-043, § 458-40-660, filed 12/31/08, effective 1/1/09; 08-14-085, § 458-40-660, filed 6/27/08, effective 7/1/08; 08-02-064, § 458-40-660, filed 12/28/07, effective 1/1/08; 07-14-095, § 458-40-660, filed 6/29/07, effective 7/1/07; 07-02-039, § 458-40-660, filed 12/26/06, effective 1/1/07; 06-14-064, § 458-40-660, filed 6/30/06, effective 7/1/06; 06-02-005, § 458-40-660, filed 12/22/05, effective 1/1/06; 05-14-087, § 458-40-660, filed 6/30/05, effective 7/1/05; 05-02-040, § 458-40-660, filed 12/30/04, effective 1/1/05; 04-14-033, § 458-40-660, filed 6/29/04, effective 7/1/04; 04-01-125, § 458-40-660, filed 12/18/03, effective 1/1/04; 03-14-072, § 458-40-660, filed 6/26/03, effective 7/1/03. Statutory Authority: RCW 82.01.060(2), 82.32.300, 84.33.096, 84.33.091, and 84.33.140. 03-02-004, § 458-40-660, filed 12/19/02, effective 1/1/03. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 02-14-019, § 458-40-660, filed 6/21/02, effective 7/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091 and 84.33.120. 02-02-033, § 458-40-660, filed 12/24/01, effective 1/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 01-13-105, § 458-40-660, filed 6/20/01, effective 7/1/01; 01-02-020, § 458-40-660, filed 12/21/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091, 82.32.060, and 84.33.077. 00-19-067, § 458-40-660, filed 9/19/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096 and 84.33.091. 00-14-011, § 458-40-660, filed 6/27/00, effective 7/1/00; 00-02-019, § 458-40-660, filed 12/27/99, effective 1/1/00; 99-14-055, § 458-40-660, filed 6/30/99, effective 7/1/99; 99-02-032, § 458-40-660, filed 12/30/98, effective 1/1/99; 98-14-083, § 458-40-660, filed 6/30/98, effective 7/1/98; 98-02-015, § 458-40-660, filed 12/30/97, effective 1/1/98; 97-14-068, § 458-40-660, filed 6/30/97, effective 7/1/97. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.091. 97-02-069, § 458-40-660, filed 12/31/96, effective 1/1/97; 96-14-063, § 458-40-660, filed 6/28/96, effective 7/1/96; 96-02-057, § 458-40-660, filed 12/29/95, effective 1/1/96. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.200. 95-18-027, § 458-40-660, filed 8/25/95, effective 9/25/95. Statutory Authority: RCW 82.32.300 and 84.33.096. 95-02-038, § 458-40-660, filed 12/30/94, effective 1/1/95. Statutory Authority: RCW 84.33.091, 84.32.300 [82.32.300] and 84.33.096. 94-14-048, § 458-40-660, filed 6/30/94, effective 7/1/94; 94-02-047, § 458-40-660, filed 12/30/93, effective 1/1/94; 93-14-051, § 458-40-660, filed 6/30/93, effective 7/1/93; 93-02-025, § 458-40-660, filed 12/31/92, effective 1/1/93; 92-14-083, § 458-40-660, filed 6/29/92, effective 7/1/92; 92-02-067, § 458-40-660, filed 12/31/91, effective 1/1/92. Statutory Authority: RCW 84.33.096 and 82.32.300. 91-14-077, § 458-40-660, filed 6/28/91, effective 7/1/91; 91-09-030, § 458-40-660, filed 4/12/91, effective 5/13/91; 91-02-088, § 458-40-660, filed 12/31/90, effective 1/31/91; 90-14-033, § 458-40-660, filed 6/29/90, effective 7/30/90; 90-02-049, § 458-40-660, filed 12/29/89, effective 1/29/90. Statutory Authority: Chapter 84.33 RCW and RCW 84.33.091. 89-14-051 (Order FT-89-2), § 458-40-660, filed 6/30/89; 89-02-027 (Order FT-88-5), § 458-40-660, filed 12/30/88; 88-14-032 (Order FT-88-2), § 458-40-660, filed 6/30/88; 88-02-026 (Order FT-87-5), § 458-40-660, filed 12/31/87. Statutory Authority: Chapter 84.33 RCW. 87-14-042 (Order 87-2), § 458-40-660, filed 6/30/87; 87-02-023 (Order 86-4), § 458-40-660, filed 12/31/86.]

     Reviser's note: RCW 34.05.395 requires the use of underlining and deletion marks to indicate amendments to existing rules. The rule published above varies from its predecessor in certain respects not indicated by the use of these markings.

© Washington State Code Reviser's Office