WSR 16-02-064 PROPOSED RULES PROFESSIONAL EDUCATOR STANDARDS BOARD [Filed January 4, 2016, 10:28 a.m.]
Original Notice.
Preproposal statement of inquiry was filed as WSR 14-24-010.
Title of Rule and Other Identifying Information: Amends WAC 181-77-031 and 181-77-041 to clarify science, technology, engineering, and mathematics (STEM) renewal requirement language found in other WAC certification rules into specific career and technical education certificate.
Hearing Location(s): Radisson Hotel, SeaTac, 18118 International Boulevard, Seattle, WA 98188, on March 17, 2016, at 8:30.
Date of Intended Adoption: March 17, 2016.
Submit Written Comments to: David Brenna, 600 Washington Street, Room 400, Olympia, WA 98504, e-mail david.brenna@k12.wa.us, fax (360) 586-4548, by March 10, 2016.
Assistance for Persons with Disabilities: Contact David Brenna by March 10, 2016, (360) 725-6238.
Purpose of the Proposal and Its Anticipated Effects, Including Any Changes in Existing Rules: Complies with STEM renewal requirements in other certificates.
Statutory Authority for Adoption: Chapter 28A.410 RCW.
Rule is not necessitated by federal law, federal or state court decision.
Name of Agency Personnel Responsible for Drafting, Implementation, and Enforcement: David Brenna, P.O. Box 42736 [47236], Olympia, WA 98504, (360) 725-6238.
No small business economic impact statement has been prepared under chapter 19.85 RCW. The proposed amendment does not have an impact on small business and therefore does not meet the requirements for a statement under RCW 19.85.030 (1) or (2).
A cost-benefit analysis is required under RCW 34.05.328. A preliminary cost-benefit analysis may be obtained by contacting David Brenna, 600 Washington Street, Olympia, WA 98504, phone (360) 725-6238, fax (360) 586-4548, e-mail david.brenna@k12.wa.us.
January 4, 2016
David Brenna
Senior Policy Analyst
AMENDATORY SECTION (Amending WSR 08-16-004, filed 7/23/08, effective 8/23/08)
WAC 181-77-031 Requirements for candidates seeking career and technical education certification who have completed approved college/university programs in a career and technical education endorsement area.
Candidates shall complete the following requirements in addition to those set forth in WAC 181-79A-150, 181-79A-155, 181-82-322, and chapter 181-78A WAC.
(1) Initial.
(a) Candidates for the initial certificate shall hold a baccalaureate degree from a regionally accredited college or university which includes a minimum of forty-five quarter hours of study in the specific career and technical education subject area for which certification is sought.
(b) Candidates for the initial certificate shall demonstrate competency in one or more of the specific endorsement areas of WAC 181-82-322.
(c) Candidates for the initial certificate shall complete a state approved career and technical education teacher training program through a regionally accredited college or university which shall include completion of student teaching in the relevant career and technical education subject area.
(d) Candidates for the initial certificate shall provide documentation of one year of paid occupational experience (two thousand hours) in the specific career and technical education field for which certification is sought. If all or part of the two thousand hours is more than six years old, candidates must complete an additional three hundred hours of recent (occurring in the last two years) occupational experience.
(e) In addition, candidates for initial certification in career choices or coordinator of worksite learning shall demonstrate competency in knowledge and skills described in WAC 181-77A-180.
(2) Initial renewal. Candidates for renewal of the initial certificate must complete three quarter hours of credit or thirty clock hours of career and technical education educator training in the subject area certified to teach since the initial certificate was issued or renewed.
(3) Continuing.
(a) Candidates for the continuing certificate shall have in addition to the requirements for the initial certificate at least nine quarter hours or ninety clock hours of career and technical education educator training in the career and technical education subject area to be certified completed subsequent to the conferral of the baccalaureate degree.
(b) Candidates for the continuing certificate shall provide as a condition for the issuance of a continuing certificate documentation of two years of teaching/coordination in the career and technical education subject area certified to teach with an authorized employer—i.e., school district(s) or skills center(s).
(4) Continuing certificate renewal.
(a) Candidates for renewal of the continuing certificate shall complete since the previous continuing certificate was issued one of the following:
(i) Six quarter hours or sixty clock hours of career and technical education educator training;
(ii) Three quarter hours or thirty clock hours of career and technical education educator training and three quarter hours or thirty clock hours of technical education/upgrading;
(iii) Three quarter hours or thirty clock hours of career and technical education educator training and three hundred hours of occupational experience;
(iv) Provided, beginning September 1, 2014, continuing education or professional growth plans for teachers at the elementary and secondary levels in STEM-related subjects must include a specific focus on the integration of science, mathematics, technology, and engineering instruction as per RCW 28A.410.2212. This renewal requirement applies to career and technical education endorsements. Certificates being renewed starting in 2019 must demonstrate completion of at least fifteen continuing education credit hours, or at least one goal from an annual professional growth plan, with an emphasis on the integration of science, technology, engineering and mathematics.
AMENDATORY SECTION (Amending WSR 15-12-023, filed 5/26/15, effective 6/26/15)
WAC 181-77-041 Requirements for candidates seeking career and technical education certification on the basis of business and industry work experience.
Candidates for certification who have not completed approved programs set forth in WAC 181-82-322 shall complete the following requirements in addition to those set forth in WAC 181-79A-150 (1) and (2) and 181-79A-155 (1) and (2).
(1) Initial.
(a) Candidates for the initial certificate shall provide documentation of paid occupational experience in the specific career and technical education subcategory for which certification is sought: Provided, That individuals seeking the initial certification for the sole purpose of instruction of American sign language who are deaf, hard of hearing per RCW 43.20A.720, or who's primary method of communication is American sign language, may have the requirements for interpreter experience waived by the certification office of the superintendent of public instruction.
(i) Three years (six thousand hours) is required.
(ii) One year (two thousand hours) must be within the past six years.
(iii) If all or part of the two thousand hours is more than six years old, an additional three hundred hours of recent (occurring in the last two years) occupational experience is required.
(iv) Individuals seeking this certification solely for teaching American sign language must also hold or earn the national interpreter certification, certified deaf interpreter certificate, the American sign language teachers association certificate, or meet the standard required of interpreters for the deaf per RCW 28A.410.271.
(b) Candidates for the initial certificate shall complete a professional educator standards board approved program under WAC 181-77A-029 in which they demonstrate competence in the general standards for all career and technical education teacher certificate candidates pursuant to WAC 181-77A-165, which include but are not limited to knowledge and skills in the following areas:
(i) General and specific safety;
(ii) Career and technical education teaching methods;
(iii) Occupational analysis;
(iv) Course organization and curriculum design;
(v) Philosophy of vocational education;
(vi) Personal student development and leadership techniques.
(c) Candidates for the initial certificate shall also demonstrate knowledge and skills in the following areas:
(i) School law;
(ii) Issues related to abuse as specified in WAC 181-77A-165(7).
(d) In addition, candidates for initial certification in career choices or coordinator of worksite learning shall demonstrate competency in knowledge and skills described in WAC 181-77A-180.
(2) Initial renewal. Candidates for renewal of the initial certificate must complete three quarter hours of credit or thirty clock hours of career and technical education educator training in the subject matter certified to teach since the initial certificate was issued or renewed.
(3) Continuing.
(a) Candidates for the continuing certificate shall have in addition to the requirements for the initial certificate at least nine quarter hours or ninety clock hours of career and technical education educator training in the career and technical education subject matter to be certified completed subsequent to the issuance of the initial certificate.
(b) Candidates for the continuing certificate shall provide as a condition for the issuance of a continuing certificate documentation of two years of teaching/coordination in the career and technical education subject matter certified to teach with an authorized employer–i.e., school district(s) or skills center(s).
(4) Continuing certificate renewal.
(a) Candidates for renewal of the continuing certificate shall complete since the previous continuing certificate was issued one of the following:
(i) Six quarter hours or sixty clock hours of career and technical education educator training;
(ii) Three quarter hours or thirty clock hours of career and technical education educator training and three quarter hours or thirty clock hours of technical education/upgrading;
(iii) Three quarter hours or thirty clock hours of career and technical education educator training and three hundred hours of occupational experience;
(iv) Provided, beginning September 1, 2014, continuing education or professional growth plans for teachers at the elementary and secondary levels in STEM-related subjects must include a specific focus on the integration of science, mathematics, technology, and engineering instruction as per RCW 28A.410.2212. This renewal requirement applies to career and technical education endorsements. Certificates being renewed starting in 2019 must demonstrate completion of at least fifteen continuing education credit hours, or at least one goal from an annual professional growth plan, with an emphasis on the integration of science, technology, engineering and mathematics.
(b) Beginning January 2018, renewal of continuing certificates under this section specifically for teaching American sign language will require the national interpreter certification, certified deaf interpreter certificate, the American sign language teachers association certificate, or meet the standard required of interpreters of the deaf per RCW 28A.410.271.
|