WSR 17-13-113
EXPEDITED RULES
BUILDING CODE COUNCIL
[Filed June 20, 2017, 1:37 p.m.]
Title of Rule and Other Identifying Information: Clarifying changes to chapter 51-54A WAC, Washington state adoption and amendment of the 2015 International Fire Code.
NOTICE
THIS RULE IS BEING PROPOSED UNDER AN EXPEDITED RULE-MAKING PROCESS THAT WILL ELIMINATE THE NEED FOR THE AGENCY TO HOLD PUBLIC HEARINGS, PREPARE A SMALL BUSINESS ECONOMIC IMPACT STATEMENT, OR PROVIDE RESPONSES TO THE CRITERIA FOR A SIGNIFICANT LEGISLATIVE RULE. IF YOU OBJECT TO THIS USE OF THE EXPEDITED RULE-MAKING PROCESS, YOU MUST EXPRESS YOUR OBJECTIONS IN WRITING AND THEY MUST BE SENT TO Steve Simpson, Chair, State Building Code Council, P.O. Box 41449, Olympia, WA 98504-1449, AND RECEIVED BY August 21, 2017.
Purpose of the Proposal and Its Anticipated Effects, Including Any Changes in Existing Rules: Clarifies the intent of the 2015 International Fire Code. The 2015 edition of the International Fire Code (IFC) contained amendments to section 605.11 solar photovoltaic (PV) power systems. The state adoption in WAC 51-54A-0605 also contains amendments to clarify requirements for residential rooftop installation of PV panels. The model code revised the scope of this section so it was not compatible with the state amendment. The intent of the adoption of the 2015 edition of the IFC is to correlate the state amendment. This rule corrects the error and makes the state amendment compatible with the model code.
Reasons Supporting Proposal: The amendment provides a clear method of compliance for residential rooftop PV installation to meet the fire code.
Statutory Authority for Adoption: RCW 19.27.031, 19.27.074.
Statute Being Implemented: Chapters 19.27 and 34.05 RCW.
Rule is not necessitated by federal law, federal or state court decision.
Name of Proponent: State building code council, governmental.
Name of Agency Personnel Responsible for Drafting and Implementation: Tim Nogler, P.O. Box 41449, Olympia, WA 98504-1449, (360) 407-9277; and Enforcement: Local jurisdictions.
June 9, 2017
Steve K. Simpson
Council Chair
AMENDATORY SECTION (Amending WSR 17-10-028, filed 4/25/17, effective 5/26/17)
WAC 51-54A-0605 Electrical equipment, wiring and hazards.
605.11 Solar photovoltaic power systems. Installation, modification, or alteration of solar photovoltaic power systems shall comply with this section. Due to the emerging technologies in the solar photovoltaic industry, it is understood fire code officials may need to amend prescriptive requirements of this section to meet the requirements for firefighter access and product installations. Section 104.9 Alternative materials and methods of this code shall be considered when approving the installation of solar photovoltaic power systems. Solar photovoltaic power systems shall be installed in accordance with Sections 605.11.1 through 605.11.2, the International Building Code and chapter 19.28 RCW.
605.11.1.1 Roof access points. Roof access points shall be located in areas that do not require the placement of ground ladders over openings such as windows or doors, and located at strong points of building construction in locations where the access point does not conflict with overhead obstructions such as tree limbs, wires or signs.
605.11.1.2 Solar photovoltaic systems for Group R-3 residential and buildings built under the International Residential Code. Solar photovoltaic systems for Group R-3 residential and buildings built under the International Residential Code shall comply with Sections 605.11.1.2.1 through 605.11.1.2.5.
EXCEPTIONS:
((1. These requirements shall not apply to structures designed and constructed in accordance with the International Residential Code.
 
2.)) 1. Residential dwellings with an approved automatic fire sprinkler system installed.
 
((3.)) 2. Residential dwellings with approved mechanical or passive ventilation systems.
 
((4.)) 3. Where the fire code official determines that the slope of the roof is too steep for emergency access.
 
((5.)) 4. Where the fire code official determines that vertical ventilation tactics will not be utilized.
 
((6.)) 5. These requirements shall not apply to roofs where the total combined area of the solar array does not exceed thirty-three percent as measured in plan view of the total roof area of the structure, where the solar array will measure 1,000 sq. ft. or less in area, and where a minimum eighteen inches unobstructed pathway shall be maintained along each side of any horizontal ridge.
605.11.1.2.1 Size of solar photovoltaic array.
1. Each photovoltaic array shall be limited to 150 feet (45,720 mm) by 150 feet (45,720 mm). Multiple arrays shall be separated by a 3-foot wide (914 mm) clear access pathway.
2. Panels/modules shall be located up to the roof ridge where an alternative ventilation method approved by the fire code official has determined vertical ventilation techniques will not be employed.
605.11.1.2.5 Allowance for smoke ventilation operations. Panels and modules installed on Group R-3 residential and buildings built under the International Residential Code shall be located not less than 18 inches (457 mm) from the ridge in order to allow for fire department smoke ventilation operations.
EXCEPTION:
Panels and modules shall be permitted to be located up to the roof ridge where an alternative ventilation method approved by the fire chief has been provided or where the fire chief has determined vertical ventilation techniques will not be employed.
605.11.2 Ground-mounted photovoltaic arrays. Ground-mounted photovoltaic arrays shall comply with Section 605.11 and this section. Setback requirements shall not apply to ground-mounted, free-standing photovoltaic arrays.