5314-S

AN ACT Relating to weights and measures; amending RCW 19.94.010, 19.94.160, 19.94.165, 19.94.175, 19.94.185, 19.94.190, 19.94.216, 19.94.255, 19.94.280, 19.94.320, 19.94.360, 19.94.390, 19.94.410, and 19.94.510; adding new sections to chapter 19.94 RCW; adding a new section to chapter 15.80 RCW; providing effective dates; and declaring an emergency.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

Sec. 1. RCW 19.94.010 and 1992 c 237 s 3 are each amended to read as follows:

(1) Unless the context clearly requires otherwise, the definitions in this section apply throughout this chapter and to any rules adopted pursuant to this chapter.

(a) "City" means a first class city with a population of over fifty thousand persons.

(b) "City sealer" means the person duly authorized by a city to enforce and administer the weights and measures program within such city and any duly appointed deputy sealer acting under the instructions and at the direction of the city sealer.

(c) "Commodity in package form" means a commodity put up or packaged in any manner in advance of sale in units suitable for either wholesale or retail sale, exclusive, however, of an auxiliary shipping container enclosing packages that individually conform to the requirements of this chapter. An individual item or lot of any commodity not in packaged form, but on which there is marked a selling price based on established price per unit of weight or of measure, shall be construed to be a commodity in package form.

(d) "Consumer package" or "package of consumer commodity" means a commodity in package form that is customarily produced or distributed for sale through retail sales agencies or instrumentalities for consumption by persons, or used by persons for the purpose of personal care or in the performance of services ordinarily rendered in or about a household or in connection with personal possessions.

(e) "Cord" means the measurement of wood intended for fuel or pulp purposes that is contained in a space of one hundred twenty‑eight cubic feet, when the wood is ranked and well stowed.

(f) "Department" means the department of agriculture of the state of Washington.

(g) "Director" means the director of the department or duly authorized representative acting under the instructions and at the direction of the director.

(h) "Fish" means any waterbreathing animal, including shellfish, such as, but not limited to, lobster, clam, crab, or other mollusca that is prepared, processed, sold, or intended for sale.

(i) "Net weight" means the weight of a commodity excluding any materials, substances, or items not considered to be part of such commodity. Materials, substances, or items not considered to be part of a commodity shall include, but are not limited to, containers, conveyances, bags, wrappers, packaging materials, labels, individual piece coverings, decorative accompaniments, and coupons.

(j) "Nonconsumer package" or "package of nonconsumer commodity" means a commodity in package form other than a consumer package and particularly a package designed solely for industrial or institutional use or for wholesale distribution only.

(k) "Meat" means and shall include all animal flesh, carcasses, or parts of animals, and shall also include fish, shellfish, game, poultry, and meat food products of every kind and character, whether fresh, frozen, cooked, cured, or processed.

(l) "Official seal of approval" means the uniform seal or certificate issued by the director or city sealer which indicates that a weights and measures standard or a weighing or measuring instrument or device conforms with the specifications, tolerances, and other technical requirements adopted in RCW 19.94.195.

(m) "Person" means any individual, receiver, administrator, executor, assignee, trustee in bankruptcy, trust, estate, firm, copartnership, joint venture, club, company, business trust, corporation, association, society, or any group of individuals acting as a unit, whether mutual, cooperative, fraternal, nonprofit, or otherwise.

(n) "Poultry" means all fowl, domestic or wild, that is prepared, processed, sold, or intended or offered for sale.

(o) "Service agent" means a person who for hire, award, commission, or any other payment of any kind, installs, tests, inspects, checks, adjusts, repairs, reconditions, or systematically standardizes the graduations of a weighing or measuring instrument or device.

(p) "Ton" means a unit of two thousand pounds avoirdupois weight.

(q) "Weighing or measuring instrument or device" means any equipment or apparatus used commercially to establish the size, quantity, capacity, count, extent, area, heaviness, or measurement of quantities, things, produce, or articles for distribution or consumption, that are purchased, offered or submitted for sale, hire, or award on the basis of weight, measure or count, including any accessory attached to or used in connection with a weighing or measuring instrument or device when such accessory is so designed or installed that its operation affects, or may effect, the accuracy or indication of the device. This definition shall be strictly limited to those weighing or measuring instruments or devices governed by Handbook 44 as adopted under RCW 19.94.195.

(r) "Weight" means net weight as defined in this section.

(s) "Weights and measures" means the recognized standards or units of measure used to indicate the size, quantity, capacity, count, extent, area, heaviness, or measurement of any consumable commodity.

(t) "Secondary weights and measures standard" means ((~~any object~~)) the physical standards that are traceable to the primary standards through comparisons, used by the director, a city sealer, or a service agent that under specified conditions defines or represents a recognized weight or measure during the inspection, adjustment, testing, or systematic standardization of the graduations of any weighing or measuring instrument or device.

(2) The director shall prescribe by rule other definitions as may be necessary for the implementation of this chapter.

Sec. 2. RCW 19.94.160 and 1992 c 237 s 5 are each amended to read as follows:

Weights and measures standards that are in conformity with the standards of the United States as have been supplied to the state by the federal government or otherwise obtained by the state for use as state weights and measures standards, shall, when the same shall have been certified as such by the national institute of standards and technology or any successor organization, be the ((~~state~~)) primary standards of weight and measure. The state weights and measures standards shall be kept in a place designated by the director and shall ((not be removed from such designated place except for repairs or for certification. These state weights and measures standards shall be submitted at least once every ten years to the national institute of standards and technology or any successor organization for certification)) be maintained in such calibration as prescribed by the national institute of standards and technology or any successor organization.

Sec. 3. RCW 19.94.165 and 1992 c 237 s 6 are each amended to read as follows:

(1) Unless otherwise provided by ((the department, all weighing or measuring instruments or devices used for commercial purposes within this state shall be inspected and tested for accuracy by the director or city sealer at least once every two years)) law, the director or city sealer, shall have the power to inspect and test all weighing or measuring instruments or devices to ascertain if they are correct. It shall be the duty of the director or city sealer, as often as they deem necessary, to inspect and test for accuracy all weighing or measuring instruments or devices used for commercial purposes within this state and, if found to be correct, the director or city sealer shall issue an official seal of approval for each such instrument or device.

(2) ((Beginning fiscal year 1993, the schedule of inspection and testing shall be staggered so as one-half of the weighing or measuring instruments or devices under the jurisdiction of the inspecting and testing authority are approved in odd fiscal years and the remaining one-half are inspected and tested in even fiscal years.

~~(3)~~)) The department may provide, as needed, uniform, official seals of approval to city sealers for the purposes expressed in this section.

NEW SECTION. Sec. 4. A new section is added to chapter 19.94 RCW to read as follows:

(1) No person shall operate a weighing or measuring instrument or device for commercial purposes within this state without annually registering the instrument or device with the department unless the instrument or device is within a city that has a city sealer and a program for testing and inspecting weighing and measuring instruments and devices. If the commercial use is within a city having a city sealer and a program for testing and inspecting weighing or measuring instruments and devices, the instrument or device may be registered with the city.

(2) A city with such a sealer and program may establish an annual fee for registering the commercial use of such an instrument or device with the city. The annual fee shall not exceed the fee established in RCW 19.94.175 for registering the use of a similar instrument or device with the department.

(3) Any person applying with the department for registration of an instrument or device used commercially shall make such application through the master licensing system. The application shall be accompanied by the fees established in RCW 19.94.175. A separate application must be submitted for each business location. Application for weighing or measuring device registration shall be made upon a form prescribed by the department and shall contain such information as the department may require. The fees required by RCW 19.94.175 are in addition to any other fee or license required by law.

(4) The registration fee that must accompany an application for a new license or annual renewal shall be based upon the number and type of weighing or measuring devices at each business location.

(5) Device registrations shall expire on the master license expiration date unless the registration is revoked or suspended prior to that date. The master license shall be displayed in a conspicuous place in the location for which it was issued.

(6) The department may, during normal business hours, compare the number of devices listed on the master license with the number of devices at the business location to determine that appropriate registration fees have been paid.

Sec. 5. RCW 19.94.175 and 1992 c 237 s 7 are each amended to read as follows:

(((1) The department shall establish reasonable, biennial inspection and testing fees for each type or class of weighing or measuring instrument or device required to be inspected and tested under this chapter. These inspection and testing fees shall be equitably prorated within each such type or class and shall be limited to those amounts necessary for the department to cover, to the extent possible, the direct costs associated with the inspection and testing of each type or class of weighing or measuring instrument or device.

(2) Prior to the establishment and each amendment of the fees authorized under this chapter, a weights and measures fee task force shall be convened under the direction of the department. The task force shall be composed of a representative from the department who shall serve as chair and one representative from each of the following: City sealers, service agents, service stations, grocery stores, retailers, food processors/dealers, oil heat dealers, the agricultural community, and liquid propane dealers. The task force shall recommend the appropriate level of fees to be assessed by the department pursuant to subsection (1) of this section, based upon the level necessary to cover the direct costs of administering and enforcing the provisions of this chapter and to the extent possible be consistent with fees reasonably and customarily charged in the private sector for similar services.

(3) The fees authorized under this chapter may be billed only after the director or a city sealer has issued an official seal of approval for a weighing or measuring instrument or device or a weight or measure standard.

(4) All fees shall become due and payable thirty days after billing by the department or a city sealer. A late penalty of one and one-half percent per month may be assessed on the unpaid balance more than thirty days in arrears.)) (1) The following annual registration fees shall be charged for weighing or measuring instruments or devices required to be inspected and tested under this chapter:

(a)Weighing devices:

(i)Small scales "zero to four hundred pounds capacity"............. $ 6.00

(ii)Intermediate scales "four hundred one pounds to five thousand pounds capacity".................................................. $ 25.00

(iii)Large scales "over five thousand pounds capacity"............. $ 52.50

(iv)Large scales with supplemental devices......................... $ 62.50

(v)Railroad track scales........................................... $800.00

(b)Liquid fuel metering devices:

(i)Motor fuel meters with flows of less than twenty gallons per minute... $ 6.00

(ii)Motor fuel meters with flows of more than twenty but not more than one hundred fifty gallons per minute........................... $ 20.00

(iii)Motor fuel meters with flows over one hundred fifty gallons per minute........................................................... $ 25.00

(c)Liquid petroleum gas meters:

(i)With one inch diameter or smaller dispensers.................... $ 25.00

(ii)With greater than one inch diameter dispensers................. $ 37.50

(d)Fabric meters................................................... $ 6.00

(e)Cordage meters.................................................. $ 6.00

(f)Mass flow meters................................................ $ 17.50

(g)Taxi meters..................................................... $ 6.00

((~~(5)~~)) (2) Fees upon weighing or measuring instruments or devices within the jurisdiction of the city that are collected under this section by city sealers shall be deposited into the general fund, or other account, of the city as directed by the governing body of the city. ((On the thirtieth day of each month, city sealers shall, pursuant to procedures established and upon forms provided by the director, remit to the department for administrative costs ten percent of the total fees collected.

~~(6)~~)) (3) With the exception of subsection ((~~(7)~~)) (4) of this section and section 6 of this act, no person shall be required to pay more than the established ((~~inspection and testing~~)) annual registration fee adopted under this section for any weighing or measuring instrument or device ((~~in any two-year period~~)) when the same has been found to be correct.

(((7) Whenever a special request is made by the owner for the inspection and testing of a weighing or measuring instrument or device, the fee prescribed by the director for such a weighing or measuring instrument or device shall be paid by the owner.))

(4) The department or a city sealer may establish reasonable inspection and testing fees for each type or class of weighing or measuring instrument or device specially requested to be inspected or tested by the device owner. These inspection and testing fees shall be limited to those amounts necessary for the department or city sealer to cover the direct costs associated with such inspection and testing. The fees established under this subsection shall not be set so as to compete with service agents normally engaged in such services.

NEW SECTION. Sec. 6. A new section is added to chapter 19.94 RCW to read as follows:

(1) The department or a city sealer may charge the reinspection and testing fees listed in subsection (2) of this section for each type or class of weighing or measuring instrument or device required to be inspected and tested under this chapter when such a device has been found to be incorrect. Investigations for cause shall not be construed as reinspections under this section.

(2)(a)Weighing devices:

(i)Small scales "zero to four hundred pounds capacity"............. $ 12.00

(ii)Intermediate scales "four hundred one pounds to five thousand pounds capacity".................................................. $ 50.00

(iii)Large scales "over five thousand pounds capacity"............. $105.00

(iv)Large scales with supplemental devices......................... $125.00

(v)Railroad track scales........................................... $800.00

(b)Liquid fuel metering devices:

(i)Motor fuel meters with flows of less than twenty gallons per minute... $ 12.00

(ii)Motor fuel meters with flows of more than twenty but not more than one hundred fifty gallons per minute........................... $ 40.00

(iii)Motor fuel meters with flows over one hundred fifty gallons per minute........................................................... $ 50.00

(c)Liquid petroleum gas meters:

(i)With one inch diameter or smaller dispensers.................... $ 50.00

(ii)With greater than one inch diameter

dispensers.................................................... $ 75.00

(d)Fabric meters................................................... $ 12.00

(e)Cordage meters.................................................. $ 12.00

(f)Mass flow meters................................................ $ 35.00

(g)Taxi meters..................................................... $ 12.00

(3) Any fees assessed under this section and RCW 19.94.175(4) shall become due and payable thirty days after billing by the department or a city sealer. A late penalty of one and one-half percent per month may be assessed on the unpaid balance more than thirty days in arrears.

Sec. 7. RCW 19.94.185 and 1992 c 237 s 8 are each amended to read as follows:

All moneys collected under this chapter shall be paid to the director and placed in the weights and measures account hereby established in the ((~~state treasury~~)) agricultural local fund. Moneys deposited in this account ((~~may be spent only following appropriation by law and~~)) shall be used solely for the purposes ((~~of weighing or measuring instrument or device inspection and testing~~)) relating to the enforcement or implementation of this chapter. No appropriation is required for the disbursement of moneys from the account by the director.

Sec. 8. RCW 19.94.190 and 1992 c 237 s 9 are each amended to read as follows:

(1) The director and duly appointed city sealers shall enforce the provisions of this chapter. The director shall adopt rules for enforcing and carrying out the purposes of this chapter including but not limited to the following:

(a) Establishing state standards of weight, measure, or count, and reasonable standards of fill for any commodity in package form;

(b) The establishment of technical and reporting procedures to be followed, any necessary report and record forms, and marks of rejection to be used by the director and city sealers in the discharge of their official duties as required by this chapter;

(c) The establishment of technical test procedures, reporting procedures, and any necessary record and reporting forms to be used by service agents when installing, repairing, inspecting, or standardizing the graduations of any weighing or measuring instruments or devices;

(d) ((The establishment of fee payment and reporting procedures and any necessary report and record forms to be used by city sealers when remitting the percentage of total fees collected as required under this chapter;

~~(e)~~)) The establishment of exemptions from the sealing or marking inspection and testing requirements of RCW 19.94.250 with respect to weighing or measuring instruments or devices of such character or size that such sealing or marking would be inappropriate, impracticable, or damaging to the apparatus in question;

((~~(f)~~)) (e) The establishment of exemptions from the inspection and testing requirements of RCW 19.94.165 with respect to classes of weighing or measuring instruments or devices found to be of such character that periodic inspection and testing is unnecessary to ensure continued accuracy; and

((~~(g)~~)) (f) The establishment of inspection and approval techniques, if any, to be used with respect to classes of weighing or measuring instruments or devices that are designed specifically to be used commercially only once and then discarded, or are uniformly mass‑produced by means of a mold or die and are not individually adjustable.

(2) These rules shall also include specifications and tolerances for the acceptable range of accuracy required of weighing or measuring instruments or devices and shall be designed to eliminate from use, without prejudice to weighing or measuring instruments or devices that conform as closely as practicable to official specifications and tolerances, those (a) that are of such construction that they are faulty, that is, that are not reasonably permanent in their adjustment or will not repeat their indications correctly, or (b) that facilitate the perpetration of fraud.

Sec. 9. RCW 19.94.216 and 1992 c 237 s 12 are each amended to read as follows:

The department shall:

(1) Biennially inspect and test the secondary weights and measures standards of any city for which the appointment of a city sealer is provided by this chapter and shall issue an official seal of approval for same when found to be correct. The department shall, by rule, establish a reasonable fee for ((~~such~~)) this and any other inspection and testing services performed by the department's metrology laboratory.

(2) ((~~Biennially~~)) Inspect, test, and, if found to be correct, issue an official seal of approval for any weighing or measuring instrument or device used in an agency or institution to which moneys are appropriated by the legislature or of the federal government and shall report any findings in writing to the executive officer of the agency or institution concerned. The department shall collect a reasonable fee, to be set by rule, for testing any such weighing or measuring instrument or device.

(3) Inspect, test, and, if found to be correct, issue a seal of approval for classes of weighing or measuring instruments or devices found to be few in number, highly complex, and of such character that differential inspection and testing frequency is necessary including, but not limited to, railroad track scales and grain elevator scales. The department shall develop rules regarding the inspection and testing procedures to be used for such weighing or measuring instruments or devices which shall include requirements for the provision, maintenance, and transport of any weight or measure standard necessary for inspection and testing at no expense to the state. ((The department may collect a reasonable fee, to be set by rule, for inspecting and testing any such weighing and measuring instruments or devices. This fee shall not be unduly burdensome and shall cover, to the extent possible, the direct costs of performing such service.))

Sec. 10. RCW 19.94.255 and 1992 c 237 s 17 are each amended to read as follows:

(1) Weighing or measuring instruments or devices that have been rejected under the authority of the director or a city sealer shall remain subject to the control of the rejecting authority until such time as suitable repair or disposition thereof has been made as required by this section.

(2) The owner of any weighing or measuring instrument or device that has been marked or tagged as rejected by the director or a city sealer shall cause the same to be made correct within thirty days or such longer period as may be authorized by the rejecting authority. In lieu of correction, the owner of such weighing and measuring instrument or device may dispose of the same, but only in the manner specifically authorized by the rejecting authority.

(((3) Weighing and measuring instruments or devices that have been rejected shall not again be used commercially until they have been officially reexamined and, if found to be correct, had an official seal of approval placed upon or issued for such weighing or measuring instrument or device by the rejecting authority.))

Sec. 11. RCW 19.94.280 and 1992 c 237 s 20 are each amended to read as follows:

(1) There may be a city sealer in every city and such deputies as may be required by ordinance of each such city to administer and enforce the provisions of this chapter.

(2) Each city electing to have a city sealer shall adopt rules for the appointment and removal of the city sealer and any deputies required by local ordinance. The rules for appointment of a city sealer and any deputies must include provisions for the advice and consent of the local governing body of such city and, as necessary, any provisions for local civil service laws and regulations.

(3) A city sealer ((~~shall~~)) may adopt the fee amounts established ((~~by the director pursuant to RCW 19.94.165~~)) under section 6 of this act. However, no city shall adopt or charge an inspection, testing, reinspection, retesting, or licensing fee or any other fee upon a weighing or measuring instrument or device that is in excess of the fee amounts ((~~adopted under RCW 19.94.165~~)) established by the department under the provisions of this chapter for substantially similar services.

(4) A city sealer shall keep a complete and accurate record of all official acts performed under the authority of this chapter and shall submit an annual report to the governing body of his or her city and shall make any reports as may be required by the director.

Sec. 12. RCW 19.94.320 and 1992 c 237 s 22 are each amended to read as follows:

(1) In cities for which city sealers have been appointed as provided for in this chapter, the director shall have general ((~~supervisory powers over such~~)) oversight of city ((~~sealers~~)) weights and measures programs and may, when he or she deems it reasonably necessary, exercise concurrent authority to carry out the provisions of this chapter.

(2) When the director elects to exercise concurrent authority within a city with a duly appointed city sealer, the director's powers and duties relative to this chapter shall be in addition to the powers granted in any such city by law or charter.

Sec. 13. RCW 19.94.360 and 1969 c 67 s 36 are each amended to read as follows:

In addition to the declarations required by RCW 19.94.350, any commodity in package form, the package being one of a lot containing random weights, measures or counts of the same commodity ((~~and bearing the total selling price of the package~~)) at the time it is exposed for sale at retail, shall bear on the outside of the package a plain and conspicuous declaration of the price per single unit of weight, measure, or count and the total selling price of the package.

Sec. 14. RCW 19.94.390 and 1969 c 67 s 39 are each amended to read as follows:

(1) Whenever any commodity or service is sold, or is offered, exposed, or advertised for sale, by weight, measure, or count, the price shall not be misrepresented, nor shall the price be represented in any manner calculated or tending to mislead or deceive an actual or prospective purchaser. Whenever an advertised, poster or labeled price per unit of weight, measure, or count includes a fraction of a cent, all elements of the fraction shall be prominently displayed and the numeral or numerals expressing the fraction shall be immediately adjacent to, of the same general design and style as, and at least one-half the height and one-half the width of the numerals representing the whole cents.

(2) The examination procedure recommended for price verification by the price verification working group of the laws and regulations committee of the national conference on weights and measures (as reflected in the fourth draft, dated November 1, 1994) for devices such as electronic scanners shall govern such examinations conducted under this chapter. The procedure shall be deemed to be adopted under this chapter. However, the department may revise the procedure as follows: The department shall provide notice of and conduct a public hearing pursuant to chapter 34.05 RCW to determine whether any revisions to this procedure made by the national institute of standards and technology or its successor organization for incorporating the examination procedure into an official handbook of the institute or its successor, or any subsequent revisions of the handbook regarding such procedures shall also be adopted under this chapter. If the department determines that the procedure should be so revised, it may adopt the revisions. Violations of this section regarding the use of devices such as electronic scanners may be found only as provided by the examination procedures adopted by or under this subsection.

(3) Electronic scanner screens installed after January 1, 1996, and used in retail establishments must be visible to the consumer at the checkout line.

Sec. 15. RCW 19.94.410 and 1988 c 63 s 1 are each amended to read as follows:

((~~(1) Except as provided in subsection (2) of this section,~~)) Butter, oleomargarine and margarine shall be offered and exposed for sale and sold by weight ((~~and only in units of one-quarter pound, one-half pound, one pound or multiples of one pound, avoirdupois weight.~~

(2) The director of agriculture may allow the sale of butter speciality products in nonstandard units of weight if the purpose achieved by using such nonstandard units is decorative in nature and the products are clearly labeled as to weight and price per pound)).

Sec. 16. RCW 19.94.510 and 1992 c 237 s 35 are each amended to read as follows:

(1) Any person who, by himself or herself, by his or her agent or employee, or as the agent or employee of another person, knowingly performs any one of the acts enumerated in (a) through (k) of this subsection is subject to a civil penalty of no more than one thousand dollars:

(a) Use or have in possession for the purpose of using for any commercial purpose a weighing or measuring instrument or device that is intentionally calculated to falsify any weight, measure, or count of any commodity, or to sell, offer, expose for sale or hire or have in possession for the purpose of selling or hiring an incorrect weighing or measuring instrument or device or any weighing or measuring instrument or device calculated to falsify any weight or measure.

(b) Knowingly use or have in possession for current use in the buying or selling of any commodity or thing, for hire or award, or in the computation of any basic charge or payment for services rendered on the basis of weight, measurement, or count, or in the determination of weight, measurement or count, when a charge is made for such determination, any incorrect weighing or measuring instrument or device.

(d) Remove from any weighing or measuring instrument or device, contrary to law or rule, any tag((~~, seal~~)), stamp or mark placed thereon by the director or a city sealer.

(e) Sell, offer or expose for sale less than the quantity he or she represents of any commodity, thing or service.

(f) Take more than the quantity he or she represents of any commodity, thing, or service when, as buyer, he or she furnishes the weight, measure, or count by means of which the amount of the commodity, thing or service is determined.

(g) Keep for the purpose of sale, advertise, offer or expose for sale or sell any commodity, thing or service in a condition or manner contrary to law or rule.

(h) Use in retail trade, except in the preparation of packages put up in advance of sale and of medical prescriptions, a weighing or measuring instrument or device that is not so positioned that its indications may be accurately read and the weighing or measuring operation observable from some position which may reasonably be assumed by a customer.

(i) Knowingly approve or issue an official seal of approval for any weighing or measuring instrument or device known to be incorrect.

(j) Fails to disclose to the department or a city sealer any knowledge of information relating to, or observation of, any device or instrument added to or modifying any weighing or measuring instrument or device for the purpose of selling, offering, or exposing for sale, less than the quantity represented of a commodity or calculated to falsify weight or measure, if the person is a service agent.

(k) Violate any other provision of this chapter or of the rules adopted under the provisions of this chapter for which a specific penalty has not been prescribed.

(2) Any person who, by himself or herself, by his or her agent or employee, or as the agent or employee of another person, violates RCW 19.94.390 as determined by the examination procedure adopted by or under RCW 19.94.390(2) is subject to a civil penalty of not more than one thousand dollars. The results of an examination conducted pursuant to RCW 19.94.390(2) shall not be disclosed to the public for a period of ten days following the completion of the examination.

(3) Any person who, by himself or herself, by his or her agent or employee, or as the agent or employee of another person, performs any of the following acts is subject to a civil penalty of no more than five thousand dollars:

(a) Knowingly adds to or modifies any weighing or measuring instrument or device by the addition of a device or instrument that would allow the sale, or the offering or exposure for sale, of less than the quantity represented of a commodity or falsification of weight or measure.

(b) Commits as a fourth or subsequent infraction any of the acts listed in subsection (1) of this section.

NEW SECTION. Sec. 17. A new section is added to chapter 15.80 RCW to read as follows:

All moneys collected under this chapter shall be placed in the weights and measures account in the agricultural local fund created in RCW 19.94.185.

NEW SECTION. Sec. 18. A new section is added to chapter 19.94 RCW to read as follows:

The department shall develop a written report on the implementation of chapter . . ., Laws of 1995 (this act) that provides information including but not limited to the number of inspections conducted, the results of the inspections, the number of warnings issued, and the number of enforcement actions taken. The report shall be submitted to the secretary of the senate and chief clerk of the house of representatives, on December 15th of each even-numbered year. This section shall expire January 1, 2000.

NEW SECTION. Sec. 19. (1) Sections 1 through 3 and 6 through 17 of this act are necessary for the immediate preservation of the public peace, health, or safety, or support of the state government and its existing public institutions, and shall take effect June 1, 1995.

(2) Sections 4 and 5 of this act shall take effect January 1, 1996.