Z-1027.2  _______________________________________________

                          HOUSE BILL 2356

          _______________________________________________

State of Washington      55th Legislature     1998 Regular Session

By Representatives Reams, Romero, Gardner and Linville; by request of Department of Revenue

Read first time 01/12/98.  Referred to Committee on House Government Reform & Land Use.

Eliminating requirements for filing certificates or annual summaries for sales and use tax exemptions on manufacturing machinery and equipment.

    AN ACT Relating to eliminating requirements for filing certificates or annual summaries for sales and use tax exemptions on manufacturing machinery and equipment; amending RCW 82.12.02565; reenacting and amending RCW 82.08.02565; and providing an effective date.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

    Sec. 1.  RCW 82.08.02565 and 1996 c 247 s 2 and 1996 c 173 s 3 are each reenacted and amended to read as follows:

    (1) The tax levied by RCW 82.08.020 shall not apply to sales to a manufacturer or processor for hire of machinery and equipment used directly in a manufacturing operation or research and development operation, or to sales of or charges made for labor and services rendered in respect to installing, repairing, cleaning, altering, or improving the machinery and equipment, but only when the purchaser provides the seller with an exemption certificate in a form and manner prescribed by the department by rule((, and the purchaser provides the department with a duplicate of the certificate or a summary of exempt sales as the department may require)).  The seller shall retain a copy of the certificate for the seller's files.

    (2) For purposes of this section and RCW 82.12.02565:

    (a) "Machinery and equipment" means industrial fixtures, devices, and support facilities, and tangible personal property that becomes an ingredient or component thereof, including repair parts and replacement parts.  "Machinery and equipment" includes pollution control equipment installed and used in a manufacturing operation or research and development operation to prevent air pollution, water pollution, or contamination that might otherwise result from the manufacturing operation or research and development operation.

    (b) "Machinery and equipment" does not include:

    (i) Hand tools;

    (ii) Property with a useful life of less than one year;

    (iii) Buildings, other than machinery and equipment that is permanently affixed to or becomes a physical part of a building; and

    (iv) Building fixtures that are not integral to the manufacturing operation or research and development operation that are permanently affixed to and become a physical part of a building, such as utility systems for heating, ventilation, air conditioning, communications, plumbing, or electrical.

    (c) Machinery and equipment is "used directly" in a manufacturing operation or research and development operation if the machinery and equipment:

    (i) Acts upon or interacts with an item of tangible personal property;

    (ii) Conveys, transports, handles, or temporarily stores an item of tangible personal property at the manufacturing site;

    (iii) Controls, guides, measures, verifies, aligns, regulates, or tests tangible personal property;

    (iv) Provides physical support for or access to tangible personal property;

    (v) Produces power for, or lubricates machinery and equipment;

    (vi) Produces another item of tangible personal property for use in the manufacturing operation or research and development operation;

    (vii) Places tangible personal property in the container, package, or wrapping in which the tangible personal property is normally sold or transported; or

    (viii) Is integral to research and development as defined in RCW 82.63.010.

    (d) "Manufacturing operation" means the manufacturing of articles, substances, or commodities for sale as tangible personal property.  The manufacturing operation begins at the point where the raw materials enter the manufacturing site and ends at the point where the finished product leaves the manufacturing site.  The term also includes that portion of a cogeneration project that is used to generate power for consumption within the manufacturing site of which the cogeneration project is an integral part.  The term does not include the production of electricity by a light and power business as defined in RCW 82.16.010 or the preparation of food products on the premises of a person selling food products at retail.

    (e) "Cogeneration" means the simultaneous generation of electrical energy and low-grade heat from the same fuel.

    (f) "Research and development operation" means engaging in research and development as defined in RCW 82.63.010 by a manufacturer or processor for hire.

    Sec. 2.  RCW 82.12.02565 and 1996 c 247 s 3 are each amended to read as follows:

    The provisions of this chapter shall not apply in respect to the use by a manufacturer or processor for hire of machinery and equipment used directly in a manufacturing operation or research and development operation((, but only when the user provides the department with:

    (1) An exemption certificate in a form and manner prescribed by the department within sixty days of the first use of the machinery and equipment in this state; or

    (2) An annual summary listing the machinery and equipment by January 31 of the year following the calendar year in which the machinery and equipment is first used in this state)).

NEW SECTION. Sec. 3.  This act takes effect July 1, 1998.

                            --- END ---