"Sec. 1   RCW 19.260.020 and 2009 c 565 s 18 and 2009 c 501 s 1 are each reenacted and amended to read as follows:
     The definitions in this section apply throughout this chapter unless the context clearly requires otherwise.
     (1) "Automatic commercial ice cube machine" means a factory-made assembly, not necessarily shipped in one package, consisting of a condensing unit and ice-making section operating as an integrated unit with means for making and harvesting ice cubes. It may also include integrated components for storing or dispensing ice, or both.
     (2) "Bottle-type water dispenser" means a water dispenser that uses a bottle or reservoir as the source of potable water.
     (3) "Commercial hot food holding cabinet" means a heated, fully enclosed compartment, with one or more solid or partial glass doors, that is designed to maintain the temperature of hot food that has been cooked in a separate appliance. "Commercial hot food holding cabinet" does not include heated glass merchandising cabinets, drawer warmers, or cook and hold appliances.
     (4)(a) "Commercial refrigerators and freezers" means refrigerators, freezers, or refrigerator-freezers designed for use by commercial or institutional facilities for the purpose of storing or merchandising food products, beverages, or ice at specified temperatures that: (i) Incorporate most components involved in the vapor-compression cycle and the refrigerated compartment in a single cabinet; and (ii) may be configured with either solid or transparent doors as a reach-in cabinet, pass-through cabinet, roll-in cabinet, or roll-through cabinet.
     (b) "Commercial refrigerators and freezers" does not include: (i) Products with 85 cubic feet or more of internal volume; (ii) walk-in refrigerators or freezers; (iii) consumer products that are federally regulated pursuant to 42 U.S.C. Sec. 6291 et seq.; (iv) products without doors; or (v) freezers specifically designed for ice cream.
     (5) "Compensation" means money or any other valuable thing, regardless of form, received or to be received by a person for services rendered.
     (6) "Cook and hold appliance" means a multiple mode appliance intended for cooking food that may be used to hold the temperature of the food that has been cooked in the same appliance.
     (7) "Department" means the department of commerce.
     (8) "Drawer warmer" means an appliance that consists of one or more heated drawers and that is designed to hold hot food that has been cooked in a separate appliance at a specified temperature.
     (9) "Heated glass merchandising cabinet" means an appliance with a heated cabinet constructed of glass or clear plastic doors which, with seventy percent or more clear area, is designed to display and maintain the temperature of hot food that has been cooked in a separate appliance.
     (10) "Hot water dispenser" means a small electric water heater that has a measured storage volume of no greater than one gallon.
     (11) "Mini-tank electric water heater" means a small electric water heater that has a measured storage volume of more than one gallon and a rated storage volume of less than twenty gallons.
     (12) "Pass-through cabinet" means a commercial refrigerator or freezer with hinged or sliding doors on both the front and rear of the unit.
     (13) "Point-of-use water dispenser" means a water dispenser that uses a pressurized water utility connection as the source of potable water.
     (14) "Pool heater" means an appliance designed for heating nonpotable water contained at atmospheric pressure for swimming pools, spas, hot tubs, and similar applications.
     (15) "Portable electric spa" means a factory-built electric spa or hot tub, supplied with equipment for heating and circulating water.
     (16) "Reach-in cabinet" means a commercial refrigerator or freezer with hinged or sliding doors or lids, but does not include roll-in or roll-through cabinets or pass-through cabinets.
     (17) "Residential pool pump" means a pump used to circulate and filter pool water in order to maintain clarity and sanitation.
     (18)(a) "Roll-in cabinet" means a commercial refrigerator or freezer with hinged or sliding doors that allow wheeled racks of product to be rolled into the unit.
     (b) "Roll-through cabinet" means a commercial refrigerator or freezer with hinged or sliding doors on two sides of the cabinet that allow wheeled racks of product to be rolled through the unit.
     (19) "Showerhead" means a device through which water is discharged for a shower bath.
     (20) "Showerhead tub spout diverter combination" means a group of plumbing fittings sold as a matched set and consisting of a control valve, a tub spout diverter, and a showerhead.
     (21) "State-regulated incandescent reflector lamp" means a lamp that is not colored or designed for rough or vibration service applications, has an inner reflective coating on the outer bulb to direct the light, an E26 medium screw base, a rated voltage or voltage range that lies at least partially within 115 to 130 volts, and falls into one of the following categories:
     (a) A bulged reflector or elliptical reflector bulb shape and which has a diameter which equals or exceeds 2.25 inches; or
     (b) A reflector, parabolic aluminized reflector, or similar bulb shape and which has a diameter of 2.25 to 2.75 inches.
     (22) "Tub spout diverter" means a device designed to stop the flow of water into a bathtub and to divert it so that the water discharges through a showerhead.
     (23) "Wine chillers designed and sold for use by an individual" means refrigerators designed and sold for the cooling and storage of wine by an individual.
     (24) "Class A external power supply" means an external power supply circuit that is used to convert household electric current into DC current or lower voltage AC current to operate a consumer product and that:
     (a) Is designed to convert line voltage AC input into lower voltage AC or DC output;
     (b) Is able to convert to only one AC or DC output voltage at a time;
     (c) Is sold with, or intended to be used with, a separate end-use product that constitutes the primary load;
     (d) Is contained in a separate physical enclosure from the end-use product;
     (e) Is connected to the end-use product via a removable or hard-wired male/female electrical connection, cable, cord, or wiring;
     (f) Has nameplate output power that is less than or equal to two hundred fifty watts; and
     (g) Is a federally regulated external power supply.
     (25)(a) "Compact audio product" means an integrated audio system encased in a single housing that includes an amplifier and radio tuner, attachable or separable speakers, and can reproduce audio from one or more of the following media: Magnetic tape, CD, DVD, or flash memory.
     (b) "Compact audio product" does not include products that can be independently powered by internal batteries or that have a powered external satellite antenna, or that can provide a video output signal.
     (26) "Digital versatile disc (DVD)" means a laser-encoded plastic medium capable of storing a large amount of digital audio, video, and computer data.
     (27) "Digital versatile disc player" or "DVD player" means a commercially available electronic product encased in a single housing that includes an integral power supply and for which the sole purpose is the decoding of digitized video signals on a DVD.
     (28)(a) "Digital versatile disc (DVD) recorder" or "DVD recorder" means a commercially available electronic product encased in a single housing that includes an integral power supply and for which the sole purpose is the production or recording of digitized video signals on a DVD.
     (b) "DVD recorder" does not include models that have an electronic programming guide function.
     (29) "Electronic programming guide" means an application that provides an interactive, onscreen menu of television listings and that downloads program information from the vertical blanking interval of a regular television signal.
     (30)(a) "State-regulated external power supply" means a single-voltage external AC to DC or AC to AC power supply that:
     (i) Is designed to convert line voltage AC input into lower voltage DC or AC output;
     (ii) Is able to convert to only one DC or AC output voltage at a time;
     (iii) Is sold with, or intended to be used with, a separate end-use product that constitutes the primary load;
     (iv) Is contained within a separate physical enclosure from the end-use product;
     (v) Is connected to the end-use product via a removable or hard-wired male/female electrical connection, cable, cord, or other wiring;
     (vi) Does not have batteries or battery packs that physically attach directly (including those that are removable) to the power supply unit;
     (vii) Does not have a battery chemistry or type selector switch and an indicator light; or, does not have a battery chemistry or type selector switch and a state of charge meter; and
     (viii) Has a nameplate output power less than or equal to two hundred fifty watts.
     (b) "State-regulated external power supply" does not include:
     (i) A class A external power supply that is federally regulated; or
     (ii) A device that requires federal food and drug administration listing and approval as a medical device in accordance with 21 U.S.C. Sec. 360c.

Sec. 2   RCW 19.260.030 and 2009 c 501 s 2 are each amended to read as follows:
     (1) This chapter applies to the following types of new products sold, offered for sale, or installed in the state:
     (a) Automatic commercial ice cube machines;
     (b) Commercial refrigerators and freezers;
     (c) State-regulated incandescent reflector lamps;
     (d) Wine chillers designed and sold for use by an individual;
     (e) Hot water dispensers and mini-tank electric water heaters;
     (f) Bottle-type water dispensers and point-of-use water dispensers;
     (g) Pool heaters, residential pool pumps, and portable electric spas;
     (h) Tub spout diverters; ((and))
     (i) Commercial hot food holding cabinets;
     (j) Compact audio products, digital versatile disc players, and digital versatile disc recorders; and
     (k) State-regulated external power supplies.
     (2) This chapter applies equally to products whether they are sold, offered for sale, or installed as stand-alone products or as components of other products.
     (3) This chapter does not apply to:
     (a) New products manufactured in the state and sold outside the state;
     (b) New products manufactured outside the state and sold at wholesale inside the state for final retail sale and installation outside the state;
     (c) Products installed in mobile manufactured homes at the time of construction; or
     (d) Products designed expressly for installation and use in recreational vehicles.

Sec. 3   RCW 19.260.040 and 2009 c 501 s 3 are each amended to read as follows:
     The minimum efficiency standards specified in this section apply to the types of new products set forth in RCW 19.260.030.
     (1)(a) Automatic commercial ice cube machines must have daily energy use and daily water use no greater than the applicable values in the following table:

Sec. 4   RCW 19.260.050 and 2009 c 501 s 4 are each amended to read as follows:
     (1) No new commercial refrigerator or freezer or state-regulated incandescent reflector lamp manufactured on or after January 1, 2007, may be sold or offered for sale in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040. No new automatic commercial ice cube machine manufactured on or after January 1, 2008, may be sold or offered for sale in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040.
     (2) On or after January 1, 2008, no new commercial refrigerator or freezer or state-regulated incandescent reflector lamp manufactured on or after January 1, 2007, may be installed for compensation in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040. On or after January 1, 2009, no new automatic commercial ice cube machine manufactured on or after January 1, 2008, may be installed for compensation in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040.
     (3) Standards for state-regulated incandescent reflector lamps are effective on the dates specified in subsections (1) and (2) of this section.
     (4) The following products, if manufactured on or after January 1, 2010, may not be sold or offered for sale in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040:
     (a) Wine chillers designed and sold for use by an individual;
     (b) Hot water dispensers and mini-tank electric water heaters;
     (c) Bottle-type water dispensers and point-of-use water dispensers;
     (d) Pool heaters, residential pool pumps, and portable electric spas;
     (e) Tub spout diverters; and
     (f) Commercial hot food holding cabinets.
     (5) The following products, if manufactured on or after January 1, 2010, may not be installed for compensation in the state on or after January 1, 2011, unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040:
     (a) Wine chillers designed and sold for use by an individual;
     (b) Hot water dispensers and mini-tank electric water heaters;
     (c) Bottle-type water dispensers and point-of-use water dispensers;
     (d) Pool heaters, residential pool pumps, and portable electric spas;
     (e) Tub spout diverters; and
     (f) Commercial hot food holding cabinets.
     (6) No new compact audio products, digital versatile disc players, or digital versatile disc recorders, if manufactured on or after January 1, 2011, may be:
     (a) Sold or offered for sale in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040; or
     (b) Installed for compensation in the state on or after January 1, 2012, unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040.
     (7) No new state-regulated external power supply, if manufactured on or after January 1, 2011, may be:
     (a) Sold or offered for sale in the state unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040; or
     (b) Installed for compensation in the state on or after January 1, 2012, unless the efficiency of the new product meets or exceeds the efficiency standards set forth in RCW 19.260.040.

NEW SECTION.  Sec. 5   If any provision of this act or its application to any person or circumstance is held invalid, the remainder of the act or the application of the provision to other persons or circumstances is not affected."