BILL REQ. #: S-0846.2
State of Washington | 63rd Legislature | 2013 Regular Session |
Read first time 02/06/13. Referred to Committee on Energy, Environment & Telecommunications.
AN ACT Relating to making energy conservation a top priority by adding new incentives and aligning the timing of the acquisitions of eligible renewable resources, electricity, or equivalent renewable energy credits, with the need for additional electric generating resources to serve consumers' loads, without changing the eligible renewable targets; amending RCW 19.285.040; and creating a new section.
BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:
NEW SECTION. Sec. 1 (1) The legislature finds that conservation
helps all consumers including seniors, low-income residents, small
business owners, day cares, schools, libraries, farms, and factories.
The legislature further finds that prioritizing energy conservation is
the premiere method to meet future state energy needs -- reducing
energy demand and costs for everyone. Conservation as the number one
priority will also ensure that ratepayer dollars are spent locally
creating green jobs in every community in Washington state. To achieve
this goal, the legislature further finds that citizens must be
protected from requirements imposed on utilities that discourage
conservation.
(2) It is the intent of the legislature to encourage the
acquisition of energy conservation and eligible renewable resources by
allowing utilities greater flexibility to meet conservation and
eligible renewable targets and consumers' energy needs in the most
prudent and cost-effective manner.
(3) The legislature finds that most utilities have already
achieved, or are well on their way to achieving, eligible renewable
resource acquisition targets as part of their requirements to serve
consumers with additional clean, renewable energy.
(4) It is the intent of the legislature to remove unintended
economic hardship on electric consumers and reinforce the policy
intentions of 2006's Initiative Measure No. 937, including stabilizing
electric prices, increasing conservation, and creating high quality
local jobs.
Sec. 2 RCW 19.285.040 and 2012 c 22 s 3 are each amended to read
as follows:
(1) Each qualifying utility shall pursue all available conservation
that is cost-effective, reliable, and feasible.
(a) By January 1, 2010, using methodologies consistent with those
used by the Pacific Northwest electric power and conservation planning
council in its most recently published regional power plan, each
qualifying utility shall identify its achievable cost-effective
conservation potential through 2019. At least every two years
thereafter, the qualifying utility shall review and update this
assessment for the subsequent ten-year period.
(b) Beginning January 2010, each qualifying utility shall establish
and make publicly available a biennial acquisition target for cost-effective conservation consistent with its identification of achievable
opportunities in (a) of this subsection, and meet that target during
the subsequent two-year period. At a minimum, each biennial target
must be no lower than the qualifying utility's pro rata share for that
two-year period of its cost-effective conservation potential for the
subsequent ten-year period.
(c) In meeting its conservation targets, a qualifying utility may
count high-efficiency cogeneration owned and used by a retail electric
customer to meet its own needs. High-efficiency cogeneration is the
sequential production of electricity and useful thermal energy from a
common fuel source, where, under normal operating conditions, the
facility has a useful thermal energy output of no less than thirty-three percent of the total energy output. The reduction in load due to
high-efficiency cogeneration shall be: (i) Calculated as the ratio of
the fuel chargeable to power heat rate of the cogeneration facility
compared to the heat rate on a new and clean basis of a
best-commercially available technology combined-cycle natural gas-fired
combustion turbine; and (ii) counted towards meeting the biennial
conservation target in the same manner as other conservation savings.
(d) A qualifying utility may choose to count conservation acquired
in excess of the biennial target in (b) of this subsection directly
toward a subsequent biennial conservation target or as an equivalent
renewable energy credit to meet a current or future renewable target
under subsection (2)(a) of this section. Any such conservation may be
used only once to meet a target under (b) of this subsection or
subsection (2)(a) of this section. The quantity of any excess
conservation so counted may not reduce or otherwise impact the
calculation of total achievable cost-effective conservation potential
in the update of the conservation potential assessment used to
establish such a subsequent biennial target.
(e) The commission may determine if a conservation program
implemented by an investor-owned utility is cost-effective based on the
commission's policies and practice.
(((e))) (f) The commission may rely on its standard practice for
review and approval of investor-owned utility conservation targets.
(2)(a) Except as provided in (((j))) (k) of this subsection, each
qualifying utility shall use eligible renewable resources or acquire
equivalent renewable energy credits, or any combination of them, to
meet the following annual targets:
(i) At least three percent of its load by January 1, 2012, and each
year thereafter through December 31, 2015;
(ii) At least nine percent of its load by January 1, 2016, and each
year thereafter through December 31, 2019; and
(iii) At least fifteen percent of its load by January 1, 2020, and
each year thereafter.
(b) A qualifying utility may count distributed generation at double
the facility's electrical output if the utility: (i) Owns or has
contracted for the distributed generation and the associated renewable
energy credits; or (ii) has contracted to purchase the associated
renewable energy credits.
(c) In meeting the annual targets in (a) of this subsection, a
qualifying utility shall calculate its annual load based on the average
of the utility's load for the previous two years.
(d) A qualifying utility shall be considered in compliance with an
annual target in (a) of this subsection if: (i) The utility's weather-adjusted load for the previous three years on average did not increase
over that time period; (ii) after December 7, 2006, the utility did not
commence or renew ownership or incremental purchases of electricity
from resources other than renewable resources other than on a daily
spot price basis and the electricity is not offset by equivalent
renewable energy credits; and (iii) the utility invested at least one
percent of its total annual retail revenue requirement that year on
eligible renewable resources, renewable energy credits, or a
combination of both.
(e) The requirements of this section may be met for any given year
with renewable energy credits produced during that year, the preceding
year, or the subsequent year. Each renewable energy credit may be used
only once to meet the requirements of this section.
(f) In complying with the targets established in (a) of this
subsection, a qualifying utility may not count:
(i) Eligible renewable resources or distributed generation where
the associated renewable energy credits are owned by a separate entity;
or
(ii) Eligible renewable resources or renewable energy credits
obtained for and used in an optional pricing program such as the
program established in RCW 19.29A.090.
(g) Where fossil and combustible renewable resources are cofired in
one generating unit located in the Pacific Northwest where the cofiring
commenced after March 31, 1999, the unit shall be considered to produce
eligible renewable resources in direct proportion to the percentage of
the total heat value represented by the heat value of the renewable
resources.
(h)(i) A qualifying utility that acquires an eligible renewable
resource or renewable energy credit may count that acquisition at one
and two-tenths times its base value:
(A) Where the eligible renewable resource comes from a facility
that commenced operation after December 31, 2005; and
(B) Where the developer of the facility used apprenticeship
programs approved by the council during facility construction.
(ii) The council shall establish minimum levels of labor hours to
be met through apprenticeship programs to qualify for this extra
credit.
(i)(i) A qualifying utility shall be considered in compliance with
an annual target in (a) of this subsection if, as of January 1st of the
target year, the electricity from the qualifying utility's: (A)
Electric generating resources, other than eligible renewable resources,
either owned or under contract by January 1, 2010, and available to
serve the utility's load during the target year; and (B) eligible
renewable resources either owned or under contract for the target year
and available to serve the utility's load during the target year (or
equivalent renewable energy credits), meets or exceeds the utility's
load as described in (c) of this subsection.
(ii) Nothing in this subsection (2)(i) limits or interferes with a
qualifying utility's authority to sell or otherwise dispose of any
excess of electricity or credits as determined in (i)(i) of this
subsection, whether the excess of electricity or credits is greater or
less than the annual target.
(j) A qualifying utility shall be considered in compliance with an
annual target in (a) of this subsection if events beyond the reasonable
control of the utility that could not have been reasonably anticipated
or ameliorated prevented it from meeting the renewable energy target.
Such events include weather-related damage, mechanical failure,
strikes, lockouts, and actions of a governmental authority that
adversely affect the generation, transmission, or distribution of an
eligible renewable resource under contract to a qualifying utility.
(((j))) (k)(i) Beginning January 1, 2016, only a qualifying utility
that owns or is directly interconnected to a qualified biomass energy
facility may use qualified biomass energy to meet its compliance
obligation under ((RCW 19.285.040)) this subsection (2).
(ii) A qualifying utility may no longer use electricity and
associated renewable energy credits from a qualified biomass energy
facility if the associated industrial pulping or wood manufacturing
facility ceases operation other than for purposes of maintenance or
upgrade.
(((k))) (l) An industrial facility that hosts a qualified biomass
energy facility may only transfer or sell renewable energy credits
associated with its facility to the qualifying utility with which it is
directly interconnected with facilities owned by such a qualifying
utility and that are capable of carrying electricity at transmission
voltage. The qualifying utility may only use an amount of renewable
energy credits associated with qualified biomass energy that are
equivalent to the proportionate amount of its annual targets under
(a)(ii) and (iii) of this subsection that was created by the load of
the industrial facility. A qualifying utility that owns a qualified
biomass energy facility may not transfer or sell renewable energy
credits associated with qualified biomass energy to another person,
entity, or qualifying utility.
(3) Utilities that become qualifying utilities after December 31,
2006, shall meet the requirements in this section on a time frame
comparable in length to that provided for qualifying utilities as of
December 7, 2006.