PDFRCW 82.60.020

Definitions.

Unless the context clearly requires otherwise, the definitions in this section apply throughout this chapter.
(1) "Applicant" means a person applying for a tax deferral under this chapter.
(2) "Department" means the department of revenue.
(3) "Eligible area" means:
(a) Through June 30, 2010, a rural county as defined in RCW 82.14.370; and
(b) Beginning July 1, 2010, a qualifying county.
(4)(a) "Eligible investment project" means an investment project that is located, as of the date the deferral application is received by the department, in an eligible area as defined in subsection (3) of this section.
(b) "Eligible investment project" does not include any portion of an investment project undertaken by a light and power business as defined in RCW 82.16.010(4), other than that portion of a cogeneration project that is used to generate power for consumption within the manufacturing site of which the cogeneration project is an integral part, or investment projects that have already received deferrals under this chapter.
(5)(a) "Initiation of construction" means the date that a building permit is issued under the building code adopted under RCW 19.27.031 for:
(i) Construction of the qualified building, if the underlying ownership of the building vests exclusively with the person receiving the economic benefit of the deferral;
(ii) Construction of the qualified building, if the economic benefits of the deferral are passed to a lessee as provided in RCW 82.60.025; or
(iii) Tenant improvements for a qualified building, if the economic benefits of the deferral are passed to a lessee as provided in RCW 82.60.025.
(b) "Initiation of construction" does not include soil testing, site clearing and grading, site preparation, or any other related activities that are initiated before the issuance of a building permit for the construction of the foundation of the building.
(c) If the investment project is a phased project, "initiation of construction" applies separately to each phase.
(6) "Investment project" means an investment in qualified buildings or qualified machinery and equipment, including labor and services rendered in the planning, installation, and construction of the project.
(7) "Manufacturing" means the same as defined in RCW 82.04.120. "Manufacturing" also includes:
(a) Before July 1, 2010: (i) Computer programming, the production of computer software, and other computer-related services, but only when the computer programming, production of computer software, or other computer-related services are performed by a manufacturer as defined in RCW 82.04.110 and contribute to the production of a new, different, or useful substance or article of tangible personal property for sale; (ii) the activities performed by research and development laboratories and commercial testing laboratories; and (iii) the conditioning of vegetable seeds; and
(b) Beginning July 1, 2010: (i) The activities performed by research and development laboratories and commercial testing laboratories; and (ii) the conditioning of vegetable seeds.
(8) "Person" has the meaning given in RCW 82.04.030.
(9) "Qualified buildings" means construction of new structures, and expansion or renovation of existing structures for the purpose of increasing floor space or production capacity used for manufacturing or research and development activities, including plant offices and warehouses or other facilities for the storage of raw material or finished goods if such facilities are an essential or an integral part of a factory, mill, plant, or laboratory used for manufacturing or research and development. If a building is used partly for manufacturing or research and development and partly for other purposes, the applicable tax deferral must be determined by apportionment of the costs of construction under rules adopted by the department.
(10) "Qualified employment position" means a permanent full-time employee employed in the eligible investment project during the entire tax year. The term "entire tax year" means a full-time position that is filled for a period of 12 consecutive months. The term "full-time" means at least 35 hours a week, 455 hours a quarter, or 1,820 hours a year.
(11) "Qualified machinery and equipment" means all new industrial and research fixtures, equipment, and support facilities that are an integral and necessary part of a manufacturing or research and development operation. "Qualified machinery and equipment" includes: Computers; software; data processing equipment; laboratory equipment; manufacturing components such as belts, pulleys, shafts, and moving parts; molds, tools, and dies; operating structures; and all equipment used to control or operate the machinery.
(12) "Qualifying county" means a county that has an unemployment rate, as determined by the employment security department, which is at least 20 percent above the state average for the three calendar years immediately preceding the year in which the list of qualifying counties is established or updated, as the case may be, as provided in RCW 82.60.120.
(13) "Recipient" means a person receiving a tax deferral under this chapter.
(14) "Research and development" means the development, refinement, testing, marketing, and commercialization of a product, service, or process before commercial sales have begun, but only when such activities are intended to ultimately result in the production of a new, different, or useful substance or article of tangible personal property for sale. As used in this subsection, "commercial sales" excludes sales of prototypes or sales for market testing if the total gross receipts from such sales of the product, service, or process do not exceed $1,000,000.
[ 2023 c 374 s 14; 2010 1st sp.s. c 16 s 2; 2010 c 114 s 138; 2006 c 142 s 1; 2004 c 25 s 3; 1999 sp.s. c 9 s 2; 1999 c 164 s 301; 1996 c 290 s 4; 1995 1st sp.s. c 3 s 5. Prior: 1994 sp.s. c 7 s 704; 1994 sp.s. c 1 s 1; 1993 sp.s. c 25 s 403; 1988 c 42 s 16; 1986 c 116 s 12; 1985 c 232 s 2.]

NOTES:

Retroactive application2010 1st sp.s. c 16 ss 2 and 11: "The amendments to the definitions of "manufacturing" and "research and development" in sections 2 and 11 of this act apply retroactively as well as prospectively." [ 2010 1st sp.s. c 16 s 15.]
Effective date2010 1st sp.s. c 16: See note following RCW 82.60.010.
ApplicationFindingIntent2010 c 114: See notes following RCW 82.32.534.
Effective date2006 c 142: "This act takes effect July 1, 2006." [ 2006 c 142 s 2.]
Effective date2004 c 25: "This act is necessary for the immediate preservation of the public peace, health, or safety, or support of the state government and its existing public institutions, and takes effect April 1, 2004." [ 2004 c 25 s 8.]
IntentSeverabilityEffective date1999 sp.s. c 9: See notes following RCW 82.04.120.
Savings1999 c 164 ss 301-303, 305, 306, and 601-603: "Sections 301 through 303, 305, 306, and 601 through 603 of this act do not affect any existing right acquired or liability or obligation under the sections amended or repealed in those sections or any rule or order adopted under those sections, nor does it affect any proceeding instituted under those sections." [ 1999 c 164 s 803.]
FindingsIntentPart headings and subheadings not lawEffective dateSeverability1999 c 164: See notes following RCW 43.160.010.
FindingsEffective date1995 1st sp.s. c 3: See notes following RCW 82.08.02565.
FindingIntentSeverability1994 sp.s. c 7: See notes following RCW 43.70.540.
SeverabilityEffective datesPart headings, captions not law1993 sp.s. c 25: See notes following RCW 82.04.230.
Severability1988 c 42: See note following RCW 4.24.480.