PDFWAC 196-23-010

Seals.

All individuals licensed in accordance with chapter 18.43 RCW must utilize a seal/stamp that conforms to the design as authorized by the board. It is the responsibility of each licensee to maintain control over the use of their stamp/seal. The impression or image of the seal/stamp must conform to the below-illustrated design and be of a size that assures full legibility of the following required information:
(1) State of Washington;
(2) Registered professional engineer or registered professional land surveyor;
(3) Certificate number;
(4) Licensee's name as shown on wall certificate.
[Statutory Authority: RCW 18.43.035, 18.210.050, and 18.210.060. WSR 25-02-004, s 196-23-010, filed 12/18/24, effective 1/18/25. Statutory Authority: RCW 18.43.035. WSR 08-10-009, § 196-23-010, filed 4/24/08, effective 7/1/08; WSR 06-22-036, § 196-23-010, filed 10/25/06, effective 11/25/06; WSR 99-15-058, § 196-23-010, filed 7/15/99, effective 8/15/99.]