(1) The installer certification tag must be placed on the home upon completion of each installer's portion of the work and prior to inspection by the local enforcement agency.

(2) The installer certification tags must be placed on the end of a home section directly above or below the HUD certification tag or placed on the chassis main I-beam directly adjacent to and visible from the crawl space access.

(3) The local enforcement agency may not issue final approval of a home installation until one or more installer certification tags have been affixed to the home indicating all installation work was performed by a certified manufactured home installer or approved homeowner.

(4) The installer certification tag may only be removed by the owner of the home following final approval of the installation of the home by the local enforcement agency.