PDFWAC 296-807-15020

Make sure tools and containers are properly labeled.

(1) You must make sure tools are properly labeled.
(2) You must make sure each tool has a readable, permanent label that shows the manufacturer's:
(a) Model number.
(b) Unique serial number.
(3) You must make sure there is a durable warning label on each tool that:
(a) Reads "warning - for use only by qualified operators according to manufacturer's instruction manual"; or
(b) Uses words with the same meaning.
(4) You must make sure the tool storage container has these labels:
(a) "powder actuated tool" on the outside of the container in an easily seen position.
(b) "warning - powder actuated tool. to be used only by a qualified operator and kept under lock and key when not in use" on the inside cover.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-807-15020, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, [49.17].040, [49.17].050, and [49.17].060. WSR 03-09-009, § 296-807-15020, filed 4/4/03, effective 8/1/03.]