(1) You must inspect PITs according to the manufacturer's instructions.
(2) You must inspect PITs at these times:
(a) Daily before being put into service; and
(b) After each shift, if the PIT is used on a continuous (twenty-four-hour) basis.
Note: | You can designate someone on the off-going shift, on-coming shift, or some other person to do the inspection. |
(3) You must report and correct any deficiencies noted during the inspection.
[Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050, and
49.17.060. WSR 17-18-075, § 296-863-30010, filed 9/5/17, effective 10/6/17; WSR 04-19-051, § 296-863-30010, filed 9/14/04, effective 2/1/05.]