PDFWAC 296-864-20005

Make sure wheel components are compatible.

(1) You must make sure tires and rim wheels are compatible before assembly.
(2) You must make sure split rim wheel components are not interchanged, except as provided in:
(a) The Occupational Safety and Health Administration (OSHA) and National Highway Traffic Safety Administration (NHTSA) charts, "Demounting and Mounting Procedures for Truck/Bus Tires" and "Multi-Piece Rim Matching Chart"; or
(b) The rim manual for that component.
Note:
Reprints of these charts, "Demounting and Mounting Procedures for Truck/Bus Tires" and "Multi-Piece Rim Matching Chart," are available:
 
1. Through the WISHA Training and Outreach office at 360-902-5638.
 
2. Through the OSHA area offices. The address and telephone number of the nearest OSHA area office can be obtained by looking in the local telephone directory under U.S. Government, U.S. Department of Labor, Occupational Safety and Health Administration.
 
3. From the OSHA website at http://www.osha.gov/pls/publications/pubindex.continue.
 
4. Through U.S. Postal Service at:
 
OSHA Publications Office
 
U.S. Department of Labor Occupational Safety and Health Administration
 
200 Constitution Ave. N.W.
 
Washington D.C. 20210
 
Telephone: 202-693-1888.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 15-24-102, § 296-864-20005, filed 12/1/15, effective 1/5/16; WSR 04-20-079, § 296-864-20005, filed 10/5/04, effective 2/1/05.]