(1) Each complete upper and lower denture and removable partial denture fabricated by a denturist licensed under the provisions of chapter
18.30 RCW, or fabricated pursuant to the denturist's work order or under the denturist's direction or supervision, must be marked with the name of the patient for whom the denture is intended.
(2) The markings must be done during fabrication and must be permanent, legible, and cosmetically acceptable.
(3) The exact location of the markings and the methods used to apply or implant them must be determined by the denturist fabricating the denture.
(4) If, in the professional judgment of the denturist, this identification is not practical, identification must be provided as follows:
(a) Only the initials of the patient may be used, if use of the patient's first and last name is impracticable; or
(b) The identification marks may be omitted in their entirety if none of the forms of identification specified in subsection (1) of this section is practicable, clinically safe, or the patient declines.
[Statutory Authority: RCW
18.30.065. WSR 20-04-028, § 246-812-360, filed 1/28/20, effective 2/28/20. Statutory Authority: Chapter
18.30 RCW and 2013 c 171. WSR 14-24-033, § 246-812-360, filed 11/24/14, effective 12/25/14. Statutory Authority: RCW
18.30.070(3). Readopted by WSR 98-20-068, § 246-812-360, filed 10/2/98, effective 11/2/98; WSR 95-22-062, § 246-812-360, filed 10/30/95, effective 11/30/95.]