Treatment Plant Classification Criteria |
Treatment Type | Design Flow MGD | Classification |
Primary | ≤ 1 | I |
˃ 1 ≤ 10 | II |
˃ 10 ≤ 20 | III |
˃ 20 | IV |
Lagoon (Nonaerated) | All | I |
Lagoon (Aerated) | ≤ 1 | I |
˃ 1 | II |
Biofiltration | ≤ 1 | II |
˃ 1 ≤ 10 | III |
˃ 10 | IV |
Extended aeration | ≤ 5 | II |
˃ 5 | III |
Activated sludge | ≤ 1 | II |
˃ 1 ≤ 10 | III |
˃ 10 | IV |
SBR | ≤ 1 | II |
˃ 1 ≤ 10 | III |
˃ 10 | IV |
Wetland treatment | ≤ 1 | I |
˃ 1 ≤ 5 | II |
˃ 5 | III |
Tertiary | ≤ 5 | III |
˃ 5 | IV |
MBR | ≤ 1 | II |
˃ 1 ≤ 10 | III |
˃ 10 | IV |
(5) Plants may be classified differently than indicated in Table 4 if:
(a) They have characteristics that make operation more or less complex or difficult than other similar plants with the same flow range.
(b) The conditions of flow or the use of the receiving waters require an unusually high degree of plant operational control.
(c) They use an approved method of wastewater treatment that is not included in this section.
[Statutory Authority: Chapter
70.95B RCW. WSR 19-15-025 (Order 18-02), § 173-230-330, filed 7/10/19, effective 8/10/19.]