(1) A manufacturer shall immediately notify the impaired driving section, in writing, of any material modification. A material modification is any addition or reduction in features, software version changes, configuration profile changes or alteration in the components and/or the design of the certified ignition interlock device. Written notification of a material modification may be submitted to the impaired driving section in an electronic format approved by the impaired driving section.
(2) A manufacturer must resubmit evidence of compliance as required in WAC
204-50-040 to the impaired driving section within thirty days of notifying the impaired driving section of a material modification.
(3) The impaired driving section will determine if the device must be submitted for recertification.
[Statutory Authority: RCW
43.43.395,
46.37.005, and
46.04.215. WSR 12-17-153, § 204-50-050, filed 8/22/12, effective 10/1/12; WSR 10-24-074, § 204-50-050, filed 11/30/10, effective 1/1/11. Statutory Authority: RCW
46.37.005 and
46.04.215. WSR 09-18-073, § 204-50-050, filed 8/31/09, effective 10/1/09. Statutory Authority: RCW
46.61.688(2). WSR 05-17-065, § 204-50-050, filed 8/11/05, effective 9/11/05. Statutory Authority: RCW
46.04.215 and
46.37.005. WSR 99-01-156, § 204-50-050, filed 12/23/98, effective 1/1/99. Statutory Authority: RCW
46.20.730. WSR 88-15-050 (Order 88-04-ESR), § 204-50-050, filed 7/18/88. Statutory Authority: 1987 c 247. WSR 88-01-020 (Order 87-05-ESR), § 204-50-050, filed 12/9/87.]