(1) Instruction. No person shall be permitted to operate or maintain analytical X-ray equipment unless such person has received instruction in and demonstrated competence as to:
(a) Identification of radiation hazards associated with the use of the equipment;
(b) Significance of the various radiation warning and safety devices incorporated into the equipment, or the reasons they have not been installed on certain pieces of equipment and the extra precautions required in such cases;
(c) Proper operating procedures for the equipment;
(d) Symptoms of an acute localized exposure; and
(e) Proper procedures for reporting an actual or suspected exposure.
(2) Personnel monitoring. Finger or wrist dosimetric devices shall be provided to and shall be used by:
(a) Analytical X-ray equipment workers using systems having an open-beam configuration and not equipped with a safety device; and
(b) Personnel maintaining analytical X-ray equipment if the maintenance procedures require the presence of a primary X-ray beam when any local component in the analytical X-ray system is disassembled or removed.
(c) Reported dose values shall not be used for the purpose of determining compliance with WAC
246-221-010 of these regulations unless evaluated by a qualified expert.
[Statutory Authority: RCW
70.98.050 and
70.98.080. WSR 91-15-083 (Order 183), § 246-228-050, filed 7/23/91, effective 8/23/91. Statutory Authority: RCW
43.70.040. WSR 91-02-049 (Order 121), recodified as § 246-228-050, filed 12/27/90, effective 1/31/91; Order 1084, § 402-40-060, filed 1/14/76.]