(1) Wiring diagrams.
(2) A log identifying applicable tests.
(3) Manufacturer's operational instructions that include the operation of the manual lowering device.
(4) Maintenance logs shall include the following tasks:
(a) Stair chair lifts:
(i) Platform lifts:
(A) Operating control devices;
(B) Seat, arm rests, and foot rest;
(C) Rated load and data plate; and
(D) Ride.
(ii) Machine:
(A) Enclosure;
(B) Drive machine brake;
(C) Suspension means;
(D) Disconnecting means;
(E) Numbering of equipment;
(F) Gears and bearings;
(G) Winding drum;
(H) Suspension fastenings;
(I) Slack-rope devices; and
(J) Overspeed governor.
(iii) Runway:
(A) Normal terminal stopping devices;
(B) Final terminal stopping devices;
(C) Head room;
(D) Guiding members;
(E) Construction;
(F) Clearances;
(G) Traveling cables and junction boxes;
(H) Guide rail fastenings and equipment; and
(I) Equipment exposure to weather.
(b) Inclined platform lifts:
(i) Platform:
(A) Stop switch;
(B) Operating control devices;
(C) Floor;
(D) Lighting;
(E) Emergency signal;
(F) Signs and operating device symbols;
(G) Rated load and data plates;
(H) Ride; and
(I) Arms and retractable ramps.
(ii) Machine:
(A) Enclosure;
(B) Guarding of exposed auxiliary equipment;
(C) Drive machine brake;
(D) Gears and bearings;
(E) Winding drum;
(F) Belt or chain drive;
(G) Secondary and deflector sheaves;
(H) Suspension fastenings;
(I) Slack-rope devices;
(J) Safety device;
(K) Overspeed governor;
(L) Disconnecting means;
(M) Numbering of equipment; and
(N) Controller.
(iii) Runway:
(A) Normal terminal stopping devices;
(B) Final terminal stopping devices;
(C) Head room;
(D) Slack rope devices;
(E) Safeties and guiding members;
(F) Construction;
(G) Clearances;
(H) Guide rail fastenings and equipment;
(I) Suspension means; and
(J) Equipment exposure to weather.
(c) Vertical platform lifts:
(i) Platform:
(A) Stop switch;
(B) Operating control devices;
(C) Lighting and auxiliary lighting;
(D) Emergency signaling device;
(E) Gates and retractable ramps;
(F) Enclosure;
(G) Signs and operating device symbols;
(H) Rated load and data plate; and
(I) Ride.
(ii) Machine:
(A) Enclosure;
(B) Drive machine brake;
(C) Gears and bearings;
(D) Winding drum;
(E) Belt or chain drive machine;
(F) Secondary or deflector sheaves;
(G) Suspension fastenings;
(H) Slack rope device;
(I) Overspeed governors;
(J) Hydraulic power unit;
(K) Control valves; and
(L) Hydraulic cylinders and supply piping.
(iii) Runways:
(A) Normal terminal stopping device;
(B) Final terminal stopping device;
(C) Head room;
(D) Slack rope device;
(E) Safeties and guiding members;
(F) Construction;
(G) Clearances;
(H) Traveling cables;
(I) Door and gate equipment;
(J) Suspension fastenings;
(K) Suspension means; and
(L) Equipment exposure to weather.
(iv) Outside runway:
(A) Doors and gates;
(B) Door locking devices; and
(C) Enclosure.