Each commercial coach chassis must be designed and constructed to be capable of:
(1) Effectively sustaining the design loads consisting of the dead load plus five PSF load on the floor and the superimposed dynamic load resulting from highway movement, in no case shall the dynamic load be required to exceed twice the dead load; and
(2) Accepting the shock and vibration from the roadway and towing vehicle through the use of adequate running gear assemblies.
(3) In the set up mode, the commercial coach must be designed to accommodate the design live floor load established in WAC
296-150C-0800 (1)(e).
[Statutory Authority: Chapter
43.22 RCW and 2003 c 291. WSR 05-01-102, § 296-150C-1080, filed 12/14/04, effective 2/1/05. Statutory Authority: RCW
43.22.340 and
43.22.480. WSR 99-13-010, § 296-150C-1080, filed 6/4/99, effective 7/5/99. Statutory Authority: Chapter
43.22 RCW. WSR 98-14-078, § 296-150C-1080, filed 6/30/98, effective 7/31/98. Statutory Authority: RCW
43.22.340, [43.22.]355, [43.22.]360, [43.22.]432, [43.22.]440 and [43.22.]480. WSR 96-21-146, § 296-150C-1080, filed 10/23/96, effective 11/25/96.]