PDFWAC 296-807-100

Scope.

This chapter applies to the tools and equipment shown in Table 1, Scope of this chapter.
Table 1
Scope of this Chapter
This section:
Applies to:
110 Switches
(controls)
Hand-held portable power tools.
120 Portable circular saws
Hand-held portable circular saws.
130 Portable belt sanding machines
Hand-held portable belt sanding machines.
140 Compressed air tools
Hand-held portable compressed air powered tools. It also applies to airhose and plastic pipe used to supply compressed air to these tools.
150 Powder actuating fastening systems
Powder actuated fastening systems designed to use the expanding gases from a powder load to propel a stud, pin, fastener, or other object into hard structural material.
160 Power
lawnmowers
Consumer and commercial power lawnmowers.
170 Jacks
Portable hand- or power-operated:
• Hydraulic jacks
• Mechanical ratchet jacks
• Mechanical screw jacks.
180 Portable tools using abrasive wheels
Portable tools using abrasive wheels.
[Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050. WSR 15-23-086, § 296-807-100, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. WSR 07-03-163, § 296-807-100, filed 1/24/07, effective 4/1/07; WSR 03-09-009, § 296-807-100, filed 4/4/03, effective 8/1/03.]