You must use only a powder load that is:
(1) Recommended by the tool manufacturer for the particular tool; or
(2) One that provides the same level of safety and performance.
[Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050. WSR 15-23-086, § 296-807-15030, filed 11/17/15, effective 12/18/15. Statutory Authority: RCW
49.17.010, [49.17].040, [49.17].050, and [49.17].060. WSR 03-09-009, § 296-807-15030, filed 4/4/03, effective 8/1/03.]