| HTMLPDF | 296-835-099 | Definitions. |
| HTMLPDF | 296-835-100 | Scope. |
| HTMLPDF | 296-835-110 | General requirements. |
CONSTRUCTION | ||
| HTMLPDF | 296-835-11005 | Construct safe dip tanks. |
VENTILATION | ||
| HTMLPDF | 296-835-11010 | Provide proper ventilation for the vapor area. |
| HTMLPDF | 296-835-11015 | Take additional precautions if you recirculate ventilation system exhaust air into the workplace. |
| HTMLPDF | 296-835-11020 | Take additional precautions when using an exhaust hood. |
INSPECTION | ||
| HTMLPDF | 296-835-11025 | Periodically inspect your dip tanks and associated equipment and correct any deficiencies. |
FIRST AID | ||
| HTMLPDF | 296-835-11030 | Make sure employees working near dip tanks know appropriate first-aid procedures. |
CLEANING | ||
| HTMLPDF | 296-835-11035 | Prepare dip tanks before cleaning. |
CYANIDE | ||
| HTMLPDF | 296-835-11040 | Safeguard cyanide tanks. |
WELDING | ||
| HTMLPDF | 296-835-11045 | Protect employees during welding, burning, or other work using open flames. |
LIQUIDS HARMFUL TO SKIN | ||
| HTMLPDF | 296-835-11050 | Protect employees that use liquids that may burn, irritate, or otherwise harm the skin. |
| HTMLPDF | 296-835-120 | Additional requirements for dip tanks using flammable liquids or liquids with flashpoints greater than 199.4°F (93°C). |
CONSTRUCTION | ||
| HTMLPDF | 296-835-12005 | Include additional safeguards when constructing dip tanks. |
| HTMLPDF | 296-835-12010 | Provide overflow pipes. |
| HTMLPDF | 296-835-12015 | Provide bottom drains. |
FIRE PROTECTION | ||
| HTMLPDF | 296-835-12020 | Provide fire protection in the vapor area. |
| HTMLPDF | 296-835-12025 | Provide additional fire protection for large dip tanks. |
ELECTRICAL WIRING AND EQUIPMENT AND SOURCES OF IGNITION | ||
| HTMLPDF | 296-835-12035 | Prevent static electricity sparks or arcs when adding liquids to a dip tank. |
| HTMLPDF | 296-835-12040 | Control ignition sources. |
| HTMLPDF | 296-835-12045 | Provide safe electrical wiring and equipment where the liquid can drip or splash. |
HOUSEKEEPING | ||
| HTMLPDF | 296-835-12050 | Keep the area around dip tanks clear of combustible material and properly dispose of waste. |
HEATING LIQUID | ||
| HTMLPDF | 296-835-12055 | Make sure heating the liquid in your dip tanks does not cause a fire. |
HEAT DRYING | ||
| HTMLPDF | 296-835-12060 | Make sure a heating system used for drying objects does not cause a fire. |
CONVEYORS | ||
| HTMLPDF | 296-835-12065 | Make sure conveyor systems are safe. |
| HTMLPDF | 296-835-130 | Additional requirements for dip tanks used for specific processes. |
HARDENING OR TEMPERING | ||
| HTMLPDF | 296-835-13005 | Meet specific requirements if you use a hardening or tempering tank. |
ELECTROSTATIC EQUIPMENT | ||
| HTMLPDF | 296-835-13010 | Meet specific requirements if you use electrostatic equipment. |
FLOW COATING | ||
| HTMLPDF | 296-835-13015 | Meet specific requirements if you use a flow coating process. |
ROLL COATING | ||
| HTMLPDF | 296-835-13020 | Take additional precautions if your roll coating operation uses a liquid that has a flashpoint below 140°F (60°C). |
VAPOR DEGREASING | ||
| HTMLPDF | 296-835-13025 | Provide additional safeguards for vapor degreasing tanks. |
SPRAY CLEANING OR DEGREASING | ||
| HTMLPDF | 296-835-13030 | Control liquid spray over an open surface cleaning or degreasing tank. |
| 296-835-140 | Definitions. [Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060 and 29 C.F.R. 1910 Subpart Z. WSR 14-07-086, § 296-835-140, filed 3/18/14, effective 5/1/14. Statutory Authority: RCW 49.17.010, [49.17].040, and [49.17].050. WSR 02-15-102, § 296-835-140, filed 7/17/02, effective 10/1/02.] Repealed by WSR 17-18-075, filed 9/5/17, effective 10/6/17. Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, 49.17.060. |