You must make sure the dip tank and the area around it are thoroughly cleaned of solvents and vapors before performing work involving:
(1) Welding;
(2) Burning; or
(3) Open flames.
Reference: There are additional requirements for this type of work. See Welding, cutting and brazing, chapter
296-24 WAC, Part I, and Respiratory protection, chapter
296-842 WAC.
[Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050, and
49.17.060. WSR 17-18-075, § 296-835-11045, filed 9/5/17, effective 10/6/17; WSR 05-03-093, § 296-835-11045, filed 1/18/05, effective 3/1/05. Statutory Authority: RCW
49.17.010, [49.17].040, and [49.17].050. WSR 02-15-102, § 296-835-11045, filed 7/17/02, effective 10/1/02.]