(1) You must make sure the rated capacity or the maximum intended load, whichever is less, is not exceeded.
(2) You must make sure the descent device manufacturer's specifications for rope diameter and construction are followed.
(3) You must make sure the rope is rigged through the descent device for a controlled rate of descent.
(4) You must make sure the attachment point on the descent device is one piece with no gates or openings.
(5) You must make sure the descent device will remain stationary when positive action is taken.
[Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050,
49.17.060, and chapter
49.17 RCW. WSR 14-09-095, § 296-878-20015, filed 4/22/14, effective 7/1/14. Statutory Authority: RCW
49.17.010,
49.17.040,
49.17.050, and
49.17.060. WSR 02-22-027, § 296-878-20015, filed 10/28/02, effective 1/1/03.]