Date of Adoption: February 24, 1999.
Purpose: The modifications to this rule clarify and simplify the language of the rule. It also provides for tenant and emergency services as well as property owner notification when a project impacts access to abutting property. Provides for a variance permit. Streamlines the appeal process to make it easier on the property owner. Specifies [no further information supplied by agency].
Citation of Existing Rules Affected by this Order: Amending chapter 468-51 WAC.
Statutory Authority for Adoption: Chapter 47.50 RCW.
Adopted under notice filed as WSR 98-22-061 on November 2, 1998.
Changes Other than Editing from Proposed to Adopted Version: Proposed rule included fee changes, these changes have been removed due to the limits imposed by Initiative 601.
Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.
Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 10, Repealed 0.
Number of Sections Adopted on the Agency's Own Initiative: New 1, Amended 12, Repealed 0.
Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 13, Repealed 0.
Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 10, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 0, Repealed 0. Effective Date of Rule: Thirty-one days after filing.
February 24, 1999
Gerald E. Smith
Deputy Secretary, Operations
AMENDATORY SECTION(Amending WSR 92-14-044, filed 6/24/92, effective 7/25/92)
This chapter is adopted for use by the Washington state department of transportation to implement chapter 47.50 RCW for the regulation and control of vehicular access and connection points of ingress to, and egress from, the state highway system within unincorporated areas that are under the jurisdiction of the Washington state department of transportation. However, this chapter and chapter 468-52 WAC may be used, as a default, by cities that are the permitting authorities if they have not adopted an enacting ordinance as required under chapter 47.50 RCW.
This chapter describes the connection permit application process and procedures, including a preapplication conceptual review process, and requirements for closure of unpermitted and nonconforming connections to the state highway system.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-010, filed 6/24/92, effective 7/25/92.]
For the purposes of this chapter, the following
definitions of ((
the)) terms shall apply unless the context clearly indicates otherwise:
(1) "Application" means an application form supplied by the department and completed by the applicant, a certified check or money order for the required application fee, and related property site, driveway, roadway, and traffic information.
(2) "Average daily traffic (ADT)" means the volume of traffic passing a point or segment of a highway, in both directions, during a period of time, divided by the number of days in the period and factored to represent an estimate of traffic volume for an average day of the year.
(3) "Average weekday vehicle trip ends (AWDVTE)" means the estimated total of all trips entering plus all trips leaving the applicant's site based on the final stage of proposed development.
(3))) (4) "Conforming connection" means a connection that meets current department
location, spacing, and design criteria.
(4))) (5) "Connection" means approaches, driveways, turnouts, or other means of
providing for the right of access to or from controlled access facilities on the state highway
(5))) (6) "Connection category" means a permit category of all state highway
connections, in accordance with the type of property served and the estimated traffic generated
by the applicant's site based on rates accepted by the department.
(6))) (7) "Connection permit" means a written authorization given by the department
for a specifically designed connection to the state highway system at a specific location for a
specific type and intensity of property use and specific volume of traffic for the proposed
connection, based on the final stage of proposed development of the applicant's property. The
actual form used for this authorization will be determined by the department.
(7))) (8) "Controlled access facility" means a transportation facility (excluding limited
access facilities as defined in chapter 47.52 RCW) to which access is regulated by the
governmental entity having jurisdiction over the facility. Owners or occupants of abutting lands
and other persons have a right of reasonable access to and from such facility at such points only
and in such manner as may be determined by the governmental entity.
(8))) (9) "Department" means the Washington state department of transportation.
(9))) (10) "Development approval" means an official action by a governmental land use
planning authority authorizing the developer or land owner to begin construction of any
permanent improvements on the property.
(10))) (11) "Governmental entity" means, for the purpose of this chapter, a unit of local
government or officially designated transportation authority that has the responsibility for
planning, construction, operation, maintenance, or jurisdiction over transportation facilities.
(11))) (12) "Joint use connection" means a single connection point that serves as a
connection to more than one property or development, including those in different ownerships or
in which access rights are provided in the legal descriptions.
(12))) (13) "Limited access facility" means a highway or street especially designed or
designated for through traffic, and over, from, or to which owners or occupants of abutting land,
or other persons have no right or easement, or only a limited right or easement of access, light,
view or air by reason of the fact that their property abuts upon such limited access facility, or for
any other reason to accomplish the purpose of a limited access facility.
(13))) (14) "Median" means the portion of a divided highway or divided connection
separating vehicular traffic traveling in opposite directions; not including speed change lanes,
storage lanes for left turning or U-turning vehicles, or two way left turn lanes.
(14))) (15) "Median opening" means either a full opening in a continuous median for
the specific purpose of allowing vehicles to make a left turn maneuver into or out of a property
abutting the highway, to facilitate U-turns, or to allow for a vehicle to totally cross the road, or a
directional opening allowing for left turn maneuvers into the property and U-turn maneuvers, but
not allowing for left turns or cross movements out of the property.
(15))) (16) "Nonconforming connection" means a connection not meeting current
department location, spacing, or design criteria.
(16))) (17) "Permit" means written approval issued by the department, subject to
conditions stated therein, authorizing construction, reconstruction, maintenance, or
reclassification of a state highway connection and associated traffic control devices on or to the
department's right of way.
(17))) (18) "Permitting authority" means the department or any county, municipality, or
transportation authority authorized to regulate access to their respective transportation systems.
(18))) (19) "Reasonable access" means an access connection that is suitable for the
existing and/or proposed property use and does not adversely affect the safety, operations or
maintenance of the highway system.
(20) "Right of way (R/W)" means a general term denoting land or interest therein,
acquired for or designated for transportation purposes. More specifically, land in which the
department, a county, or a municipality owns the fee simple title, has an easement devoted to or
required for use as a public road and appurtenant facilities, or has established ownership by
prescriptive right ((
pursuant to RCW 47.04.040)), or lands that have been dedicated for public
(19))) (21) "Shoulder" means the portion of the highway contiguous with the traveled
lanes for the accommodation of stopped vehicles for emergency use, and for lateral support of
base and surface courses and for other uses as allowed by law.
(20))) (22) "State highway system" means all roads, streets, and highways designated as
state routes (( pursuant to)) in compliance with chapter 47.17 RCW.
(21))) (23) "Temporary connection" means a permitted connection for a specific
property use, conditioned to be open for a specific purpose and traffic volume for a specific
period of time with the right of way to be restored by the (( permittee)) permit holder to its
original condition upon connection closure.
(24) "Variance permit" means a special nonconforming or additional connection permit, issued for a location not normally permitted by current department standards, after an engineering study demonstrates, to the satisfaction of the department, that the connection will not adversely affect the safety, maintenance or operation of the state highway in accordance with its assigned classification. This permit will remain valid until modified or revoked by the permitting authority.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-020, filed 6/24/92, effective 7/25/92.]
(1) When connection permits required. Every
owner of property which abuts a state highway, or has a legal easement to the state highway,
where limited access rights have not been acquired has a right to reasonable access, but may not
have the right to a particular means of access, to the state highway system. The right of access
to the state highway may be restricted if, ((
pursuant to)) in compliance with local regulation,
reasonable access to the state highway can be provided by way of another public road which
abuts the property. These public roads shall be of sufficient width and strength to reasonably
handle the traffic type and volumes that would be accessing that road. All new connections
including alterations and improvements to existing connections to state highways shall require a
connection permit. Such permits, if (( issued)) allowed, shall be issued only after (( issuance of))
written development approval where such approval is required, unless other interagency
coordination procedures are in effect. However, the department can provide a letter of intent to
issue a connection permit if that is a requirement of the agency that is responsible for
development approval. The alteration or closure of any existing access connection caused by
changes to the character, intensity of development, or use of the property served by the
connection or the construction of any new access connection shall not (( be initiated prior to
obtaining)) begin before a connection permit is obtained from the department. Use of a new
connection at the location specified in the permit is not authorized until the (( permittee)) permit
holder constructs or modifies the connection in accordance with the permit requirements. If a
property owner or (( permittee holding)) permit holder who has a valid connection permit wishes
to change the character, use, or intensity of the property or development served by the
connection, the department must be contacted to determine whether a new connection permit
would be required.
(2) Responsibility for other approvals. Connection permits authorize construction
improvements to be built by the ((
permittee)) permit holder on department right of way. It is the
responsibility of the applicant or (( permittee)) permit holder to obtain any other local permits or
other agency approvals that may be required, including satisfaction of all environmental
regulations. It is also the responsibility of the applicant to acquire any property rights necessary
to provide continuity from the applicant's property to the state highway right of way if the
applicant's property does not abut the right of way, except where the connection replaces an
existing access as a result of department relocation activity.
(3) Early consultation. In order to expedite the overall permit review process, the applicant is strongly encouraged to consult with the department prior to and during the local government subdivision, rezoning, site plan, or any other applicable predevelopment review process for which a connection permit will be required. The purpose of the consultation shall be to determine the permit category and to obtain a conceptual review of the development site plan and proposed access connections to the state highway system with respect to department connection location, quantity, spacing, and design standards. Such consultation will assist the developer in minimizing problems and delays during the permit application process and could eliminate the need for costly changes to site plans when unpermittable connection proposals are identified early in the planning phase. The conceptual review process is further detailed in WAC 468-51-050.
(4) Cost of construction.
Permittee.)) Permit holder. The cost of construction or modification of a
connection shall be the responsibility of the (( permittee)) permit holder, including the cost of
modification of any connection required as a result of changes in property site use in accordance
with WAC 468-51-110. However, the permit holder is not responsible for alterations made at
the request of the department that are not required by law or administrative rule.
(b) Department. Existing permitted connections impacted by the department's work
program and which, in the consideration of the department, necessitate modification, relocation,
or replacement in order to meet current department connection location, quantity, spacing, and
design standards, shall be modified, relocated, or replaced in kind by the department at no cost to
permittee)) permit holder. The cost of further enhancements or modification to the altered,
relocated, or replaced connections (( desired)) requested by the (( permittee)) permit holder shall
be the responsibility of the (( permittee)) permit holder.
(5) Notification. The department shall notify affected property owners, permit holders, business owners and/or emergency services, in writing, where appropriate, whenever the department's work program requires the modification, relocation, or replacement of their access connections. In addition to written notification, the department shall facilitate, where appropriate, a public process which may include, but is not limited to, public notices, meetings or hearings, and/or individual meetings. The department shall provide the interested parties with the standards and principles of access management.
(6) Department responsibility. The department has the responsibility to issue permits and authority to approve, disapprove, and revoke such permits, and to close connections, with cause.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-030, filed 6/24/92, effective 7/25/92.]
All connections, public or private shall be determined by the department to be in one of the following categories:
(1) "Category I - minimum connection" provides connection to the state highway system for up to ten single family residences, a duplex, or a small multi-family complex of up to ten dwelling units, which use a common connection. The category shall also apply to permanent connections to agricultural and forest lands, including field entrances; connections for the operation, maintenance, and repair of utilities; and connections serving other low volume traffic generators expected to have an average weekday vehicle trip ends (AWDVTE) of one hundred or less.
(2) "Category II - minor connection" provides connection to the state highway system for medium volume traffic generators expected to have an AWDVTE of one thousand five hundred or less, but not included in Category I.
(3) "Category III - major connection" provides connection to the state highway system for high volume traffic generators expected to have an AWDVTE exceeding one thousand five hundred.
(4) "Category IV - temporary connection" provides a temporary, time limited, connection to the state highway system for a specific property for a specific use with a specific traffic volume. Such uses include, but are not limited to, logging, forest land clearing, temporary agricultural uses, temporary construction, and temporary emergency access. The department reserves the right to remove any temporary connection at its sole discretion and at the expense of the property owner after the expiration of the permit. Further, a temporary connection permit does not bind the department, in any way, to the future issuance of a permanent connection permit at the temporary connection location.
(5) "Nonconforming connection" designation may be issued for Category I through IV permits after an analysis and determination by the department that a conforming connection cannot be made and a finding that the denial of a connection would leave the property without a reasonable means of access to the public road system. In such instances, the permit shall be noted as nonconforming and contain specific restrictions and provisions, including limits on the maximum vehicular use of the connection, the future availability of alternate means of reasonable access for which a conforming connection permit could be obtained, the removal of the nonconforming connection at the time the conforming access is available, and other conditions as necessary to carry out the provisions of chapter 47.50 RCW.
(6) "Variance connection" means a special nonconforming or additional connection permit, issued for a location not normally permitted by current department standards, after an engineering study demonstrates that the connection will not adversely affect the safety, maintenance or operation of the highway in accordance with its assigned classification. This permit will remain valid until modified or revoked by the permitting authority.
(7) "Median opening" includes openings requested for both new connections and for existing connections. New median openings proposed as part of a new driveway connection shall be reviewed as part of the permit application review process. Request for the construction of new median openings to serve existing permitted connections shall require a reevaluation of the location, quantity, design of existing connection, and traffic at the existing connections. The property owner must file a new connection permit application, for the proper connection category, showing the new proposed median opening location and design and its relationship to the existing or modified driveway connections. Nothing contained herein shall be construed to prohibit the department from closing an existing median opening where operational or safety reasons require the action. The department shall notify affected property owners, permit holders and tenants, in writing, thirty days in advance of the closure of a median opening unless immediate closure is needed for safety or operational reasons.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-040, filed 6/24/92, effective 7/25/92.]
This rule shall be used where the department is the permitting authority. Where the local governmental entity is the permitting authority, the applicable procedures of the local governmental entity must be followed. If the local governmental entity has no procedures then this rule may apply.
(1) Connection permit application and information. The appropriate application form and the application information are available from the designated local department offices. An application shall consist of the above form; application fee, as specified in WAC 468-51-070; plans; traffic data; and connection information specified in this section.
All connection and roadway design documents for Category II and III permits shall bear the seal and signature of a professional engineer, registered in accordance with chapter 18.43 RCW.
(2) Information required - all permits. The following information is required of all applicants for all permit categories, unless the department determines that specific information will not be required on individual applications. Additional information required of Category II, III, and IV permit applications is specified in this chapter. In all cases it would be prudent, prior to submittal of the application, for the applicant to inquire of the department whether the application needs additional information. The department reserves the right to request clarification or additional information during the application review process. Failure to provide the requested information within the time limits specified in the request shall result in withdrawal of the permit application.
(a) Identification and signature of property owner and applicant. The current complete names, mailing addresses, and telephone numbers of the property owner(s), the developer(s), the applicant, the transportation and legal consultants representing the applicant (if any), and the local government representative(s) responsible for processing the development's approval shall be provided as part of the application. If the property owner desires to have a representative sign the application, a notarized letter of authorization from the applicant is to be provided with the application. When the owner or applicant is a company, corporation, or other public agency, the name, address, and telephone number of the responsible officer shall be furnished. The names of all individuals signing the application and their titles shall be typed or printed directly below the signature.
(b) Property uses and traffic information. The ultimate planned property uses shall be indicated in sufficient detail to determine the appropriate permit classification. Estimated average weekday vehicle trip ends to be generated by the development, based on the planned property use, consistent with the latest trip generation information published by the Institute of Transportation Engineers, Washington, D.C., (ITE) shall be included as appropriate. If local or special trip generation rates are used, instead of the ITE rates the latest and best information shall be used and all documentation for the rate development shall be submitted with the application. For residential developments with ten or fewer units, ten trips per day per unit may be assumed. The requirement for an average weekday vehicle trip ends estimate may be waived for agricultural uses where no retail marketing is proposed.
(c) Site plan. The application shall include a plan to scale, or a schematic drawing showing critical dimensions (allowable on Category I permits only), the location of the property, and existing conditions and the character and extent of work proposed. The location of existing and proposed on-site development with respect to the existing and proposed driveway location(s) and the highway shall be shown. Minimum information on the plan shall include:
(i) Road information.
•State route number.
•County or local road name.
•Highway pavement type.
•Posted speed limit.
•The existence and location of any existing and/or future proposed public or private road abutting or entering the property; the horizontal and vertical curvature of the road(s) noting the location of existing and proposed connections and any other pertinent information.
(ii) Property information.
•Location of all existing and proposed buildings, and other structures, such as gasoline pumps, lights, trees, etc., with respect to the existing and proposed property and right of way lines.
•Any adjacent properties that are owned or controlled by the applicant, or in which the applicant has a financial interest, and indicate whether these properties will be accessed by means of the proposed connection(s).
•Proof of legal ownership or legal easement.
•The application shall include a boundary survey. The requirement for a boundary survey may be waived for Category I connections, at the discretion of the department.
•Any existing or proposed parcels segregated from the applicant's property for separate development also shall be clearly designated on the plan.
(iii) Connection location information.
•The proposed connection milepost and highway engineer's station, if available.
•Location of the highway centerline with respect to existing and proposed property lines.
•Distance of proposed public or private access connection to intersecting roads, streets, railroads.
•Existing or proposed median openings (crossovers) and connections on all sides of the state highway and other roads within six hundred sixty feet of the proposed connection location in urban areas and one thousand three hundred twenty feet in nonurban (rural) areas.
•Location of existing or proposed public or private retaining walls, fences, poles, sidewalks, bike paths, drainage structures and easements, traffic control devices, fire hydrants, utilities, or other physical features, such as trees, landscaping, green belts, and wetlands, that could affect driveway location.
•It shall be the responsibility of the applicant to physically identify the location of the proposed connection at the proposed site.
(iv) Connection design information.
•Proposed connection and approach improvements including its profile approaching the state highway, width, radii, angle to the highway, auxiliary pavement.
•Existing and proposed grading (or contouring that affects the natural drainage pattern or runoff impacting the state highway and the proposed connection).
•Drainage calculations and other pertinent data.
•Driveway, auxiliary lanes and crossover pavement design, including subgrade, base, surface materials, and thicknesses.
•Specific requirements for design information on individual Category I permit applications may be relaxed, or waived, at the discretion of the department.
(v) Joint driveway use.
•If the driveway is to serve more than one property, the plan shall detail information for all properties using the connection and the application shall include copies of legally enforceable agreements of concurrence for all property owners on joint driveway usage.
•Joint driveway use serving adjoining properties is encouraged on all highways and may
be required on some highways, ((
pursuant to)) in compliance with rules adopted by the
(3) Additional information required, Category II and Category III permits. The following is a list of additional information that may be required for each phase of the development from the applicant. Prior to the submittal of the application, the applicant shall coordinate with the appropriate designated local office of the department on the level of detail and the analysis techniques to be used.
(a) Circulation plans. All parking, interior drives, and internal traffic circulation plans.
(b) Connection users. All internal and external adjacent parcels which will use the requested connection. All existing and proposed connecting roadways and potential means of alternate access through the final buildout stage of development shall be shown on the plans submitted with the application.
(c) Traffic control devices and illumination. Proposed traffic control devices and lighting locations.
(d) Sight distance. Analysis of horizontal and vertical sight distance on the state highway with respect to the proposed connection.
(e) Traffic data and analysis. Traffic data submitted by the applicant shall be signed and sealed by a qualified professional engineer, registered in accordance with chapter 18.43 RCW. The following traffic study information may be required:
(i) Turning movements. Vehicle turning movements for present and future traffic conditions.
(ii) Volume and type. Amount and type of traffic that will be generated by the proposed development including a breakdown of anticipated peak hour traffic and an analysis of the impact on the level of service on the state highway.
(iii) Parking and circulation. Analysis of off-street parking and traffic circulation, including distances to secondary access points on the connection roadway and their impact on the operation of the state highway.
(iv) Traffic signal data. If a traffic signal is requested, the following studies may be
required: Traffic signal warrants; phasing and timing analysis; signal progression analysis;
signalization, signing, and lighting plans in ((
conformance)) compliance with department
standards. A separate department traffic signal permit is required.
(v) Off-site improvements. A traffic analysis to determine the need for off-site related roadway and geometric improvements and mitigation requirements.
(vi) Traffic control plan. A traffic control plan conforming to current department
standards set forth in the "Manual on Uniform Traffic Control Devices," documenting how the
permittee)) permit holder will provide for safe and efficient movement on the state highway
system during the construction of the connection.
(4) Additional information required, Category IV permits. Permit applications must
contain the specific dates that the connection is to be open and must contain assurances
acceptable to the department that the shoulder, curbing, sidewalks, bikeways, ditch, right of way,
and any other amenities will be restored to their original condition at the ((
holder's expense upon closure of the temporary connection.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-060, filed 6/24/92, effective 7/25/92.]
(1) Fee structure. The following nonrefundable fee structure is established for department application processing, review, and inspection. Full payment of base fees must accompany the permit application. Due to the potential complexity of Category II and Category III connection proposals, and required mitigation measures that may involve construction on the state highway, the department may require a developer agreement in addition to the connection permit. The developer agreement may include, but is not limited to: Plans; specifications; maintenance requirements; bonding requirements; inspection requirements; division of costs by the parties, where applicable; and provisions for payment by the applicant of actual costs incurred by the department in the review and administration of the applicant's proposal that exceed the required base fees in the following schedule:
|(a)||Category I base fees for one connection.|
|(i)||Field (agricultural), forest lands, utility operation and maintenance . . . . . . . . . . . .||$||50|
|(ii)||Residential dwelling units (up to 10) utilizing a single connection point . . . . . . . . . . . .||$||50|
|per dwelling unit|
|(iii)||Other, with 100 AWDVTE or less . . . . . . . . . . . .||$||500|
|(iv)||Fee per additional connection|
point . . . . . . . . . . . .
|(b)||Category II base fees for one connection.|
|(i)||Less than 1,000 AWDVTE . . . . . . . . . . . .||$||1,000|
|(ii)||1,000 to 1,500 AWDVTE . . . . . . . . . . . .||$||1,500|
|(iii)||Fee per additional connection|
point . . . . . . . . . . . .
|(c)||Category III base fees for one connection.|
|(i)||1,500 to 2,500 AWDVTE . . . . . . . . . . . .||$||2,500|
|(ii)||Over 2,500 AWDVTE . . . . . . . . . . . .||$||4,000|
|(iii)||Fee per additional connection|
point . . . . . . . . . . . .
|(d)||Category IV base fee per|
connection . . . . . . . . . . . .
(2) Surety bond. Prior to the beginning of construction of any ((
Category II or Category
III)) connection, the department may require the (( permittee)) permit holder to provide a surety
bond as specified in WAC 468-34-020(3).
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-070, filed 6/24/92, effective 7/25/92.]
(1) Application submittal. The application shall be submitted to the designated local department office serving the area. The application shall be properly prepared, clearly completed, and signed. Information on the specific number of copies to be provided and other submittal information is available from the designated local department office.
(2) Application review, processing, and approval. Upon receipt of the application, the application shall be reviewed consistent with the provisions of this chapter. If the department identifies errors in the application or if additional information is required, the department will notify the applicant. Applicants must provide such information or correct errors within thirty days of the notification. If the applicant determines that the time to provide additional or corrected information is insufficient, the applicant shall contact the department in writing to request additional time be approved. If the additional or corrected information has not been received by the department within thirty days or the approved time period agreed to, the application will be withdrawn.
(a) Review. Upon timely receipt of all required information, or upon expiration of the time period for receipt of additional or corrected information, the location and design of the connection shall be examined for consistency with current department location, quantity, spacing, classifications, and department design standards. The review shall also include an analysis of the impact of the site's existing and projected traffic on the operation and safety of the state highway.
(b) Concurrence or denial, notice. If the department concurs in the location and design
of the proposed connection, written notification of that concurrence will be sent to the applicant
and to the local governmental land use planning authority having jurisdiction over the
development. If the applicant has gone through the voluntary conceptual review process, the
written notice of concurrence will indicate whether or not there have been any changes in the
number, location, or design of the connection required by the department. No construction may
commence on the department's right of way until all necessary department and local
governmental permits are issued in accordance with (c) of this subsection. If the department
does not concur in the connection location, quantity, or design, both the applicant and the local
governmental land use planning authority having jurisdiction over the development approval
shall be notified, in writing, indicating the department's intent to deny the connection as
proposed in the application. The written notification shall state the specific reasons for the intent
to deny the connection, the process for submitting an amended application, and the appeal rights
of the applicant. The applicant may submit a revised application within thirty days based on
department comments and concerns as stated in the notification. The submittal of a revised
application within thirty days shall not require the payment of any additional application fees. Submittal of a revised permit is not a prerequisite for a request for an adjudicative proceeding
pursuant to)) in compliance with WAC 468-51-150.
(c) Permit issuance. The department shall issue the connection permit after review and concurrence that the application and the location and design of the connection comply with the requirements of this chapter, and after either:
(i) The applicant has received development approval from the appropriate local governmental land use planning authority; or
(ii) Other interagency coordination procedures in effect are satisfied for development approval by the local governmental land use planning authority.
The department shall provide the applicant with the connection permit for signature, and the applicant shall sign and return the permit to the department within thirty days after the mailing date. If the department does not receive the signed permit back from the applicant within thirty days after the mailing date or within an agreed upon time, the permit will be void and the application fee will be forfeited. The permit is not valid and construction on the access cannot begin without a completed permit that is signed by both the department and the applicant.
Additionally, the applicant must be in compliance with the surety bond requirements
specified in the permit prior to construction, in ((
accordance)) compliance with WAC 468-51-070.
(d) Request for adjudicative proceedings. In the event of a denial of a connection permit
as proposed in the application, the applicant may apply for an adjudicative proceeding ((
to)) in compliance with WAC 468-51-150.
(3) Permit conditions. Any special requirements or provisions for the connection
including off-site mitigation shall be clearly and specifically identified as part of the permit. Failure by the applicant or ((
permittee)) permit holder to abide by the permit provisions shall be
sufficient cause for the department to initiate action to alter the connection or to revoke the
permit and close the connection at the expense of the (( permittee)) permit holder. The permit
requirements shall be binding on the (( permittee)) permit holder, the (( permittee's)) permit
holder's successors, heirs and assigns, the permit application (( signators)) signatories, and all
future owners and occupants of the property. The applicant may challenge the permit conditions
by applying for an adjudicative proceeding (( pursuant to)) in compliance with WAC 468-51-150.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-080, filed 6/24/92, effective 7/25/92.]
(1) Preconstruction conference. The department may require a preconstruction conference prior to any work being performed on the department's right of way. When required by provisions in the permit, the department will schedule a preconstruction conference. The preconstruction conference should be attended by the necessary personnel to assure compliance with the terms and provisions of the permit.
(2) Time limit. Substantial construction of the connection shall begin within ninety days
of the effective date of the permit, unless a longer time is approved by the department or a time
extension is requested by the applicant and approved by the department. Construction shall be
completed within one hundred twenty days of the date of issuance of the permit, unless a time
extension is approved by the department. As a condition of the permit, the department may
further limit construction time, if the department determines that such limitation is warranted.
Failure to comply with the time limits specified in the permit shall result in an automatic
expiration of the permit following written notification to the ((
permittee)) permit holder. For
any permit which expires for failure to begin construction or to complete construction within the
specified time limits, the department may require a new application, including the payment of
the required application fee prior to the initiation of any construction.
(3) Posting of permit. The approved connection permit shall be displayed in a prominent location, protected from the weather, within the vicinity of the connection construction.
(4) Disruption of traffic. All construction and/or maintenance within department right of
way shall conform to the provisions of the connection permit, the "Manual on Uniform Traffic
Control Devices" (MUTCD); the department's current "Design Manual," and the current
"Standard Specifications for Road, Bridge, and Municipal Construction." The department may
require or restrict hours of construction to minimize disruption of traffic on the state highway
system. If construction activity within the department's right of way causes undue disruption of
traffic or creates safety hazards on a state highway, or if the construction activity is not in
compliance with the traffic control specifications in the permit, the department shall advise the
permittee)) permit holder or the (( permittee's)) permit holder's contractor of the need for
immediate corrective action, and may order immediate suspension of all or part of the work if
deemed necessary. Failure to comply with this provision may result in permit modification or
(5) Traffic signals and other traffic control devices. Traffic signals and other traffic
control devices installed by ((
permittee)) the permit holder shall conform to MUTCD and
department design and construction standards. The (( permittee)) permit holder is responsible for
securing any state and local permits needed for traffic signalization and regulatory signing and
(6) Connection construction inspection. For Category II and Category III connections,
the department may require the ((
permittee)) permit holder, the developer, or landowner to
provide inspection of construction and certification that connection construction is in accordance
with permit provisions and appropriate department standards by a professional engineer,
registered in accordance with chapter 18.43 RCW, or the department may do the inspection at
the applicant's expense, as provided in the developer agreement.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-090, filed 6/24/92, effective 7/25/92.]
The department may issue a
permit for a connection not meeting department location and spacing criteria standards if it finds
that a conforming connection is not attainable at the time of the permit application submittal and
that denial would leave the property without a reasonable ((
means of connection)) access to the
public road system. The department may issue a connection permit requiring a legally
enforceable joint-use connection when determined to be in the best interest of the state for
restoring or maintaining the operational efficiency and safety of the state highway. Nonconforming connection permits shall specify conditions or limits including:
(1) Traffic volume. The maximum vehicular usage of the connection shall be specified in the permit.
(2) Future alternate access. The permit shall specify that a conforming connection be constructed when future alternate means of access become available, and that the nonconforming connection be removed.
(3) Users. The permit shall specify the properties to be served by the connection; and any other conditions as necessary to carry out the provisions of chapter 47.50 RCW.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-100, filed 6/24/92, effective 7/25/92.]
Variance permits may be issued, at the discretion of the department, for certain connections not meeting the access classification location and spacing or that exceed the number of connections allowed by the standards adopted for a particular highway segment. These permits may be allowed if conditions warrant and are demonstrated to the satisfaction of the department by a traffic analysis, signed and sealed by a qualified professional engineer who is registered in accordance with chapter 18.43 RCW, which is included with the connection permit application. The variance permit will remain in effect unless a new permit is required due to changes in property site use in compliance with WAC 468-51-110 or unless permit modification, revocation, or closure of the variance permitted connection is required as provided for in WAC 468-51-120. The department may issue a connection permit requiring a legally enforceable joint-use connection when it is determined to be in the best interest of the state for restoring or maintaining the operational efficiency and safety of the state highway. Variance connection permits shall specify conditions or limits including, but not limited to:
(1) Traffic volume. The maximum vehicular usage of the connection shall be specified in the permit.
(2) Users. The permit shall specify the properties to be served by the connection, and any other conditions as necessary to carry out the provisions of chapter 47.50 RCW.
The connection permit is issued to
permittee)) permit holder for a particular type of land use generating specific projected
traffic volumes at the final stage of proposed development. Any changes made in the use,
intensity of development, type of traffic, or traffic flow of the property requires the (( permittee))
permit holder, (( their)) his or her assignee, or property owner to contact the department to
determine if further analysis is needed to determine if the change is significant and would
require a new permit and modifications to the connection. An engineering study, signed and
sealed by a professional engineer registered in accordance with chapter 18.43 RCW, may be
required to document the extent of the change. If modification of the existing connection is
required, based on a significant change as determined by the department, the (( permittee)) permit
holder, his or her assignee, or the property owner shall (( acquire)) obtain a new permit prior to
the initiation of any on-site construction to the connection or to the property.
(1) Significant change. A significant change is one that would cause a change in the category of the connection permit or one that causes an operational, safety, or maintenance problem on the state highway system based on objective engineering criteria or available accident data. Such data shall be provided to the property owner and/or permit holder and tenant upon written request.
(2) Notification. Failure to contact the department to determine the need for connection modifications or to apply for a new permit for such modifications prior to initiation of property improvements, land use changes or traffic flow alteration actions shall result in notification to the property owner and/or permit holder and tenant of intent to revoke the existing permit and closure of the connection to the property.
(3) Costs. The ((
permittee)) permit holder is responsible for all costs associated with
connection removal, relocation, or modification caused by increased or altered traffic flows
necessitated by changes to facilities, use, or to the nature of the business on the property.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-110, filed 6/24/92, effective 7/25/92.]
(1) Revocation criteria. All connection permits issued by the department prior to
the effective date of this chapter remain valid until revoked. The department may initiate an
action to revoke any permit if significant changes have occurred in the use, design, or traffic
flow of the property or of the state highway, requiring the relocation, alteration, or closure of the
connection; if the connection was not constructed at the location or to the design specified in the
or)) if the permit provisions were not met; or if the connection causes a safety,
maintenance, or operational problem on the state highway system. The process to be followed
by the department in the revocation of permits shall be consistent with the requirements of
chapter 34.05 RCW and WAC 468-51-150. The notification process is as follows:
(a) Notification, correction of deficiencies. The department shall serve notice, in
accordance with rules adopted ((
pursuant to)) in compliance with chapter 34.05 RCW, to the
(( permittee)) permit holder, (( permittee's)) permit holder's successors or assigns, or property
owner with a copy to the occupant, for any connection found to be in noncompliance with the
conditions of the permit or this chapter. The notice will identify and request that the deficiencies
be corrected within thirty days of service of the notice. The notice shall further advise that the
department's determination of noncompliance or deficiencies shall become final and conclusive
thirty calendar days following service of the notice unless the violations are corrected or an
adjudicative proceeding (( pursuant to)) in compliance with chapter 34.05 RCW and WAC 468-51-150 is requested by the (( permittee)) permit holder, (( permittee's)) permit holder's
successor or assigns, or the property owner.
(2) Costs. The ((
permittee)) permit holder, permit holder's successor or assignee, or
property owner shall be responsible for the costs of closure due to revocation of a connection
permit (( pursuant to)) in compliance with WAC 468-51-120 except when the closure is required
by changes to the state highway.
(3) Emergency action. This chapter shall not restrict the department's right to take
immediate remedial action, including the closure of a connection if there is an immediate and
serious danger to the public health, safety, and welfare, ((
pursuant to)) in compliance with
chapter 47.32 RCW. In such event, the department shall conform to the provisions for
emergency adjudicative proceedings in RCW 34.05.479 and rules adopted thereunder.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-120, filed 6/24/92, effective 7/25/92.]
Closure criteria, permit
requirements. Any unpermitted connections to the state highway system which were in
existence and in active use consistent with the type of connection on July 1, 1990, shall not
require the issuance of a permit and may continue to provide connection to the state highway
system, unless the property owner had received written notification initiating connection closure
from the department prior to July 1, 1990, or unless the department determines that the
unpermitted connection does not meet minimum acceptable standards of highway safety and
mobility based on accident and/or traffic data or accepted traffic engineering criteria, a copy of
which must be provided to the property owner and/or permit holder and tenant upon written
request. The department may require that a permit be obtained if a significant change occurs in
the use, design, or traffic flow of the connection or of the state highway ((
to which it provides
access)). If a permit is not obtained, the department may initiate action to close the unpermitted
connection point (( pursuant to)) in compliance with RCW 47.50.040. Any unpermitted
connection opened subsequent to July 1, 1990, is subject to closure by the department. The
process to be followed by the department in the closure of an unpermitted connection shall be
consistent with chapter 34.05 RCW and rules adopted thereunder. The notification process is as
(1) Notification. The department shall serve notice, in accordance with rules adopted
pursuant to)) in compliance with chapter 34.05 RCW, upon the property owner of a connection
to a state highway which is found by the department to be unpermitted. This notice shall clearly
describe the highway connection violation and shall establish a thirty-day time limit for either
applying for a connection permit or requesting an adjudicative proceeding (( pursuant to)) in
compliance with chapter 34.05 RCW. (( The sole issue to be determined at the adjudicative
proceeding is whether a permit should be required.)) The notice will further advise the property
owner that failure to act in either of the prescribed ways within the time period will result in
department closure of the unpermitted connection.
(2) Permit application. If a permit application is filed within the thirty days, and the
application is denied, the department shall notify the property owner of the denial. The property
owner may then proceed with the permit application revision process set forth in WAC 468-51-080 or request an adjudicative proceeding ((
pursuant to)) in compliance with WAC 468-51-150 within thirty days. Failure to act in either of those prescribed ways within the time
period set forth in the rules will result in department closure of the unpermitted connection. If
the location and design of the connection in the permit application are acceptable to the
department, the existing connection may continue to be used for a specified period of time or
until the connection specified in the permit application is constructed.
(3) Approval conditions. Modifications, relocation, or closure of unpermitted connections may be required by the department as a requirement of permit approval, subject to the adjudicative proceedings provisions of WAC 468-51-150.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-130, filed 6/24/92, effective 7/25/92.]
During construction of department projects, connections will be provided as replacements for existing approved permitted connections, that are consistent with all current department spacing, location, and design standards, based on the following conditions:
(1) Nonconforming connections. All nonconforming connections will be examined to determine if the construction project will require relocation, alteration, or closure of the connection to make it conforming.
(2) Application of current standards. The number and location of connections shall be modified to the maximum extent possible to meet current department spacing, location, and design standards. Where current department standards cannot be met, the connection shall be classified as nonconforming.
(3) New connections, modifications. The department shall allow new or require modification of existing connections if a connection permit application is made and approved.
(4) Replacement of existing connections. When connections are made as part of a department construction project replacing existing connection points without material differences, no additional permit shall be required. Costs shall be borne by the department.
(5) New connections--Cost. The construction of new connection points, if approved by the department, shall be done at the owner's expense by either the department's contractor as part of the roadway improvement or by the owner's contractor at the department's option.
(6) Modifications--Cost. If the modification of the connection point, that are based on the owner's request, is more extensive than the routine replacement of an existing connection, the owner shall also participate in the differential cost.
(7) Work by ((
permittee's)) permit holder's contractor. The department shall require that
work done by the owner's contractor be accomplished at the completion of the department's
contract or be scheduled so as not to interfere with the department's contractor. The department
may require a surety bond prior to construction of the connection in accordance with WAC 468-51-070. When the number, location or design of existing access connections to the state
highway are being modified by a department construction project, the resulting modified access
connections shall provide the same general functionality for the existing property use as they did
before the modification, taking into consideration the existing site design, normal vehicle types,
and traffic circulation requirements.
Notification. The department shall notify affected property owners, permit holders, business owners and/or emergency services, in writing, where appropriate, whenever the department's work program requires the modification, relocation, or replacement of their access connections. In addition to written notification, the department shall facilitate, where appropriate, a public process which may include, but is not limited to, public notices, meetings or hearings, and/or individual meetings. The department shall provide the interested parties with the standards and principles of access management.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-140, filed 6/24/92, effective 7/25/92.]
(1) Application. Any person who ((
the recipient or otherwise)) has standing to challenge the denial of a permit application
(( pursuant to)) in compliance with WAC 468-51-080; a permit with conditions (( pursuant to)) in
compliance with WAC 468-51-080; a notice of permit modification, revocation, or closure of
permitted connection (( pursuant to)) in compliance with WAC 468-51-120; or notice of closure
of an unpermitted connection (( pursuant to)) in compliance with WAC 468-51-130 may apply
for an adjudicative proceeding on the matter (( pursuant to)) in compliance with chapter 34.05 RCW (( and)), rules adopted thereunder, and department rules within thirty days of the date the
initial determination of the department is (( mailed to the recipient)) sent by certified mail.
(2) Conduct. Thereafter, and within the times set forth by chapter 34.05 RCW, rules
adopted thereunder, and department rules, the department shall convene an adjudicative
or a brief adjudicative proceeding as is deemed appropriate by the department)). The proceeding shall be conducted (( pursuant to)) in compliance with chapter 34.05 RCW
(( and)), rules adopted thereunder, and department rules.
Brief adjudicative hearings. The department hereby adopts RCW 34.05.482
through 34.05.494 pertaining to brief adjudicative proceedings for purposes of hearing
challenges under the provisions listed in subsection (1) of this section.
(4))) Failure to apply. Failure to apply for an adjudicative proceeding within the times set forth in subsection (1) of this section shall result in the adoption of the department's initial determination as its final determination.
(5))) (4) Failure to participate. Failure to attend or otherwise participate in an
adjudicative proceeding (( or brief adjudicative proceeding)) may result in a finding of default.
(5) Reasonableness of access. The department in its regulation of connections in compliance with chapter 47.50 RCW and these regulations shall allow reasonable access. If the department's final order denies reasonable access, the appellant shall be entitled to just compensation in compliance with RCW 47.50.010(5). Access which is not reasonable is not compensable.
[Statutory Authority: RCW 47.01.101 and chapter 47.50 RCW. 92-14-044, § 468-51-150, filed 6/24/92, effective 7/25/92.]