6099-S AMH AG H4383.1
SSB 6099 - H COMM AMD
By Committee on Agriculture & Rural Development
Strike everything after the enacting clause and insert the following:
"Sec. 1. RCW 19.94.010 and 1992 c 237 s 3 are each amended to read as follows:
(1) Unless the context clearly requires otherwise, the definitions in this section apply throughout this chapter and to any rules adopted pursuant to this chapter.
(a) "City" means a first class city with a population of over fifty thousand persons.
(b) "City sealer" means the person duly authorized by a city to enforce and administer the weights and measures program within such city and any duly appointed deputy sealer acting under the instructions and at the direction of the city sealer.
(c) "Commodity in package form" means a commodity put up or packaged in any manner in advance of sale in units suitable for either wholesale or retail sale, exclusive, however, of an auxiliary shipping container enclosing packages that individually conform to the requirements of this chapter. An individual item or lot of any commodity not in packaged form, but on which there is marked a selling price based on established price per unit of weight or of measure, shall be construed to be a commodity in package form.
(d) "Consumer package" or "package of consumer commodity" means a commodity in package form that is customarily produced or distributed for sale through retail sales agencies or instrumentalities for consumption by persons, or used by persons for the purpose of personal care or in the performance of services ordinarily rendered in or about a household or in connection with personal possessions.
(e) "Cord" means the measurement of wood intended for fuel or pulp purposes that is contained in a space of one hundred twenty‑eight cubic feet, when the wood is ranked and well stowed.
(f) "Department" means the department of agriculture of the state of Washington.
(g) "Director" means the director of the department or duly authorized representative acting under the instructions and at the direction of the director.
(h) "Fish" means any waterbreathing animal, including shellfish, such as, but not limited to, lobster, clam, crab, or other mollusca that is prepared, processed, sold, or intended for sale.
(i) "Net weight" means the weight of a commodity excluding any materials, substances, or items not considered to be part of such commodity. Materials, substances, or items not considered to be part of a commodity shall include, but are not limited to, containers, conveyances, bags, wrappers, packaging materials, labels, individual piece coverings, decorative accompaniments, and coupons.
(j) "Nonconsumer package" or "package of nonconsumer commodity" means a commodity in package form other than a consumer package and particularly a package designed solely for industrial or institutional use or for wholesale distribution only.
(k) "Meat" means and shall include all animal flesh, carcasses, or parts of animals, and shall also include fish, shellfish, game, poultry, and meat food products of every kind and character, whether fresh, frozen, cooked, cured, or processed.
(l) "Official seal of approval" means the uniform seal or certificate issued by the director or city sealer which indicates that a weights and measures standard or a weighing or measuring instrument or device conforms with the specifications, tolerances, and other technical requirements adopted in RCW 19.94.195.
(m) "Person" means any individual, receiver, administrator, executor, assignee, trustee in bankruptcy, trust, estate, firm, copartnership, joint venture, club, company, business trust, corporation, association, society, or any group of individuals acting as a unit, whether mutual, cooperative, fraternal, nonprofit, or otherwise.
(n) "Poultry" means all fowl, domestic or wild, that is prepared, processed, sold, or intended or offered for sale.
(o) "Service agent" means a person who for hire, award, commission, or any other payment of any kind, installs, inspects, checks, adjusts, repairs, reconditions, or systematically standardizes the graduations of a weighing or measuring instrument or device.
(p) "Ton" means a unit of two thousand pounds avoirdupois weight.
(q) "Weighing or measuring instrument or device" means any equipment or apparatus used commercially to establish the size, quantity, capacity, count, extent, area, heaviness, or measurement of quantities, things, produce, or articles for distribution or consumption, that are purchased, offered or submitted for sale, hire, or award on the basis of weight, measure or count, including any accessory attached to or used in connection with a weighing or measuring instrument or device when such accessory is so designed or installed that its operation affects, or may effect, the accuracy or indication of the device. This definition shall be strictly limited to those weighing or measuring instruments or devices governed by Handbook 44 as adopted under RCW 19.94.195.
(r) "Weight" means net weight as defined in this section.
(s) "Weights and measures" means the recognized standards or units of measure used to indicate the size, quantity, capacity, count, extent, area, heaviness, or measurement of any consumable commodity.
(t) "Secondary
weights and measures standard" means ((any object)) the
physical standards that are traceable to the primary standards through
comparisons, used by the director, a city sealer, or a service agent that
under specified conditions defines or represents a recognized weight or measure
during the inspection, adjustment, testing, or systematic standardization of
the graduations of any weighing or measuring instrument or device.
(2) The director shall prescribe by rule other definitions as may be necessary for the implementation of this chapter.
Sec. 2. RCW 19.94.160 and 1992 c 237 s 5 are each amended to read as follows:
Weights and measures
standards that are in conformity with the standards of the United States as
have been supplied to the state by the federal government or otherwise obtained
by the state for use as state weights and measures standards, shall, when the
same shall have been certified as such by the national institute of standards
and technology or any successor organization, be the ((state)) primary
standards of weight and measure. The state weights and measures standards
shall be kept in a place designated by the director and shall ((not be
removed from such designated place except for repairs or for certification.
These state weights and measures standards shall be submitted at least once
every ten years to the national institute of standards and technology or any
successor organization for certification)) be maintained in such
calibration as prescribed by the national institute of standards and technology
or any successor organization.
Sec. 3. RCW 19.94.175 and 1992 c 237 s 7 are each amended to read as follows:
(1) ((The department
shall establish reasonable, biennial inspection and testing fees for each type
or class of weighing or measuring instrument or device required to be inspected
and tested under this chapter. These inspection and testing fees shall be
equitably prorated within each such type or class and shall be limited to those
amounts necessary for the department to cover, to the extent possible, the
direct costs associated with the inspection and testing of each type or class
of weighing or measuring instrument or device.
(2) Prior to the
establishment and each amendment of the fees authorized under this chapter, a
weights and measures fee task force shall be convened under the direction of
the department. The task force shall be composed of a representative from the
department who shall serve as chair and one representative from each of the
following: City sealers, service agents, service stations, grocery stores,
retailers, food processors/dealers, oil heat dealers, the agricultural
community, and liquid propane dealers. The task force shall recommend the
appropriate level of fees to be assessed by the department pursuant to
subsection (1) of this section, based upon the level necessary to cover the
direct costs of administering and enforcing the provisions of this chapter and
to the extent possible be consistent with fees reasonably and customarily
charged in the private sector for similar services.
(3))) The following fees shall be charged for the
inspection and testing of weighing or measuring instruments or devices required
to be inspected and tested under this chapter:
(a)Weighing devices:
(i)Small scales "zero to four hundred pounds capacity".... $ 12.00
(ii)Intermediate scales "four hundred one pounds to five thousand pounds capacity".................... $ 50.00
(iii)Large scales "over five thousand pounds capacity".... $ 105.00
(iv)Large scales with supplemental devices......... $ 125.00
(v)Railroad track scales........................... $ 800.00
(b)Liquid fuel metering devices:
(i)Motor fuel meters with flows of less than twenty gallons per minute................................... $ 12.00
(ii)Motor fuel meters with flows of more than twenty but not more than one hundred fifty gallons per minute...... $ 40.00
(iii)Motor fuel meters with flows over one hundred fifty gallons per minute........................... $ 50.00
(c)Liquid petroleum gas meters:
(i)With one inch diameter or smaller dispensers that are not compensated for temperature variations....... $ 50.00
(ii)With one inch diameter or smaller dispensers that are compensated for temperature variations....... $ 50.00
(iii)With greater than one inch diameter dispensers that are not compensated for temperature variations... $ 75.00
(iv)With greater than one inch diameter dispensers that are compensated for temperature variations....... $ 75.00
(d)Fabric meters................................... $ 12.00
(e)Cordage meters.................................. $ 12.00
(f)Mass flow meters................................ $ 35.00
(g)Taxi meters..................................... $ 12.00
(2) The fees
authorized under this chapter ((may)) shall be billed only after
the director or a city sealer has ((issued an official seal of approval for
a)) officially inspected and tested any weighing or measuring
instrument or device ((or a weight or measure standard)).
(((4) All fees))
(3) Any fees assessed under this chapter shall become due and payable
thirty days after billing by the department or a city sealer. A late penalty
of one and one-half percent per month may be assessed on the unpaid balance
more than thirty days in arrears.
(((5))) (4)
Fees upon weighing or measuring instruments or devices within the jurisdiction
of the city that are collected under this section by city sealers shall be
deposited into the general fund, or other account, of the city as directed by
the governing body of the city. ((On the thirtieth day of each month, city
sealers shall, pursuant to procedures established and upon forms provided by
the director, remit to the department for administrative costs ten percent of
the total fees collected.
(6))) (5) With the exception of subsection (((7)))
(6) of this section, no person shall be required to pay more than the
established inspection and testing fee adopted under this section for any
weighing or measuring instrument or device in any two-year period when the same
has been found to be correct.
(((7) Whenever a
special request is made by the owner for the inspection and testing of a
weighing or measuring instrument or device, the fee prescribed by the director
for such a weighing or measuring instrument or device shall be paid by the
owner.))
(6) The department or a city sealer may establish reasonable inspection and testing fees for each type or class of weighing or measuring instrument or device specially requested to be inspected or tested by the device owner. These inspection and testing fees shall be limited to those amounts necessary for the department or city sealer to cover the direct costs associated with such inspection and testing. The fees established under this subsection shall not be set so as to compete with service agents normally engaged in such services.
NEW SECTION. Sec. 4. A new section is added to chapter 19.94 RCW to read as follows:
(1) The department or a city sealer may establish reasonable reinspection and testing fees for each type or class of weighing or measuring instrument or device required to be inspected and tested under this chapter when such a device has been found to be incorrect. These reinspection and testing fees shall be limited to those amounts necessary for the department or a city sealer to cover, to the extent possible, the direct costs associated with the reinspection and testing of each type or class of weighing or measuring instrument or device. Investigations for cause shall not be construed as reinspections under this section.
(2) Prior to the establishment and each amendment of the fees authorized under this section, a weights and measures fee task force shall be convened under the direction of the department. The task force shall be composed of a representative from the department who shall serve as chair and one representative appointed by the director from each of the following: City sealers, service agents, service stations, grocery stores, retailers, food processors/dealers, oil heat dealers, the agricultural community, and liquid propane dealers. The task force shall approve the appropriate level of fees to be assessed by the department by rule pursuant to subsection (1) of this section, based upon the level necessary to cover the direct costs of administering and enforcing the provisions of this section and to the extent possible be consistent with fees reasonably and customarily charged in the private sector for similar services. Only fee levels approved by the task force may be assessed under this section.
(3) This section expires June 30, 1995.
Sec. 5. RCW 19.94.185 and 1992 c 237 s 8 are each amended to read as follows:
All moneys collected
under this chapter shall be placed in the weights and measures account hereby
established in the state treasury. Moneys deposited in this account may be
spent only following appropriation by law and shall be used solely for the
purposes ((of weighing or measuring instrument or device inspection and
testing)) relating to the enforcement or implementation of this chapter.
Sec. 6. RCW 19.94.190 and 1992 c 237 s 9 are each amended to read as follows:
(1) The director and duly appointed city sealers shall enforce the provisions of this chapter. The director shall adopt rules for enforcing and carrying out the purposes of this chapter including but not limited to the following:
(a) Establishing state standards of weight, measure, or count, and reasonable standards of fill for any commodity in package form;
(b) The establishment of technical and reporting procedures to be followed, any necessary report and record forms, and marks of rejection to be used by the director and city sealers in the discharge of their official duties as required by this chapter;
(c) The establishment of technical test procedures, reporting procedures, and any necessary record and reporting forms to be used by service agents when installing, repairing, inspecting, or standardizing the graduations of any weighing or measuring instruments or devices;
(d) ((The
establishment of fee payment and reporting procedures and any necessary report
and record forms to be used by city sealers when remitting the percentage of
total fees collected as required under this chapter;
(e))) The establishment of exemptions from the
sealing or marking inspection and testing requirements of RCW 19.94.250 with
respect to weighing or measuring instruments or devices of such character or
size that such sealing or marking would be inappropriate, impracticable, or
damaging to the apparatus in question;
(((f))) (e)
The establishment of exemptions from the inspection and testing requirements of
RCW 19.94.165 with respect to classes of weighing or measuring instruments or
devices found to be of such character that periodic inspection and testing is
unnecessary to ensure continued accuracy; and
(((g))) (f)
The establishment of inspection and approval techniques, if any, to be used
with respect to classes of weighing or measuring instruments or devices that
are designed specifically to be used commercially only once and then discarded,
or are uniformly mass‑produced by means of a mold or die and are not
individually adjustable.
(2) These rules shall also include specifications and tolerances for the acceptable range of accuracy required of weighing or measuring instruments or devices and shall be designed to eliminate from use, without prejudice to weighing or measuring instruments or devices that conform as closely as practicable to official specifications and tolerances, those (a) that are of such construction that they are faulty, that is, that are not reasonably permanent in their adjustment or will not repeat their indications correctly, or (b) that facilitate the perpetration of fraud.
Sec. 7. RCW 19.94.216 and 1992 c 237 s 12 are each amended to read as follows:
The department shall:
(1) Biennially inspect
and test the secondary weights and measures standards of any city for
which the appointment of a city sealer is provided by this chapter and shall
issue an official seal of approval for same when found to be correct. The
department shall, by rule, establish a reasonable fee for ((such)) this
and any other inspection and testing services performed by the department's
metrology laboratory.
(2) Biennially inspect, test, and, if found to be correct, issue an official seal of approval for any weighing or measuring instrument or device used in an agency or institution to which moneys are appropriated by the legislature or of the federal government and shall report any findings in writing to the executive officer of the agency or institution concerned. The department shall collect a reasonable fee, to be set by rule, for testing any such weighing or measuring instrument or device.
(3) Inspect, test, and, if found to be correct, issue a seal of approval for classes of weighing or measuring instruments or devices found to be few in number, highly complex, and of such character that differential inspection and testing frequency is necessary including, but not limited to, railroad track scales and grain elevator scales. The department shall develop rules regarding the inspection and testing procedures to be used for such weighing or measuring instruments or devices which shall include requirements for the provision, maintenance, and transport of any weight or measure standard necessary for inspection and testing at no expense to the state. The department may collect a reasonable fee, to be set by rule, for inspecting and testing any such weighing and measuring instruments or devices. This fee shall not be unduly burdensome and shall cover, to the extent possible, the direct costs of performing such service.
Sec. 8. RCW 19.94.255 and 1992 c 237 s 17 are each amended to read as follows:
(1) Weighing or measuring instruments or devices that have been rejected under the authority of the director or a city sealer shall remain subject to the control of the rejecting authority until such time as suitable repair or disposition thereof has been made as required by this section.
(2) The owner of any weighing or measuring instrument or device that has been marked or tagged as rejected by the director or a city sealer shall cause the same to be made correct within thirty days or such longer period as may be authorized by the rejecting authority. In lieu of correction, the owner of such weighing and measuring instrument or device may dispose of the same, but only in the manner specifically authorized by the rejecting authority.
(((3) Weighing and
measuring instruments or devices that have been rejected shall not again be
used commercially until they have been officially reexamined and, if found to
be correct, had an official seal of approval placed upon or issued for such
weighing or measuring instrument or device by the rejecting authority.))
Sec. 9. RCW 19.94.280 and 1992 c 237 s 20 are each amended to read as follows:
(1) There may be a city sealer in every city and such deputies as may be required by ordinance of each such city to administer and enforce the provisions of this chapter.
(2) Each city electing to have a city sealer shall adopt rules for the appointment and removal of the city sealer and any deputies required by local ordinance. The rules for appointment of a city sealer and any deputies must include provisions for the advice and consent of the local governing body of such city and, as necessary, any provisions for local civil service laws and regulations.
(3) A city sealer ((shall))
may adopt the fee amounts established ((by the director pursuant to
RCW 19.94.165)) under RCW 19.94.175. However, no city shall
adopt or charge an inspection, testing, reinspection, retesting, or
licensing fee or any other fee upon a weighing or measuring instrument or
device that is in excess of the fee amounts ((adopted under RCW
19.94.165)) established by the department under the provisions of this
chapter for substantially similar services.
(4) A city sealer shall keep a complete and accurate record of all official acts performed under the authority of this chapter and shall submit an annual report to the governing body of his or her city and shall make any reports as may be required by the director.
Sec. 10. RCW 19.94.320 and 1992 c 237 s 22 are each amended to read as follows:
(1) In cities for which
city sealers have been appointed as provided for in this chapter, the director
shall have general ((supervisory powers over such)) oversight of
city ((sealers)) weights and measures programs and may, when he
or she deems it reasonably necessary, exercise concurrent authority to carry
out the provisions of this chapter.
(2) When the director elects to exercise concurrent authority within a city with a duly appointed city sealer, the director's powers and duties relative to this chapter shall be in addition to the powers granted in any such city by law or charter.
Sec. 11. RCW 19.94.360 and 1969 c 67 s 36 are each amended to read as follows:
In addition to the
declarations required by RCW 19.94.350, any commodity in package form, the
package being one of a lot containing random weights, measures or counts of the
same commodity ((and bearing the total selling price of the package)) at
the time it is exposed for sale at retail, shall bear on the outside of the
package a plain and conspicuous declaration of the price per single unit of
weight, measure, or count and the total selling price of the package.
NEW SECTION. Sec. 12. A new section is added to chapter 15.80 RCW to read as follows:
All moneys collected under this chapter shall be placed in the weights and measures account in the state treasury created in RCW 19.94.185."
--- END ---