H-0549.1                  _______________________________________________

                                                      HOUSE BILL 1132

                              _______________________________________________

State of Washington                              53rd Legislature                             1993 Regular Session

By Representatives Kremen, Linville and Zellinsky

Read first time 01/15/93.  Referred to Committee on Commerce & Labor.

Requiring certification of electric spa equipment.

          AN ACT Relating to the sale of electrical equipment; and amending RCW 19.28.010.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

        Sec. 1.  RCW 19.28.010 and 1992 c 79 s 2 are each amended to read as follows:

          (1) All wires and equipment, and installations thereof, that convey electric current and installations of equipment to be operated by electric current, in, on, or about buildings or structures, except for telephone, telegraph, radio, and television wires and equipment, and television antenna installations, signal strength amplifiers, and coaxial installations pertaining thereto shall be in strict conformity with this chapter, the statutes of the state of Washington, and the rules issued by the department, and shall be in conformity with approved methods of construction for safety to life and property.  All wires and equipment that fall within section 90.2(b)(5) of the National Electrical Code, 1981 edition, are exempt from the requirements of this chapter.  The regulations and articles in the National Electrical Code, as approved by the American Standards Association, and in the national electrical safety code, as approved by the American Standards Association, and other installation and safety regulations approved by the American Standards Association, as modified or supplemented by rules issued by the department in furtherance of safety to life and property under authority hereby granted, shall be prima facie evidence of the approved methods of construction.  All materials, devices, appliances, and equipment used in such installations shall be of a type that conforms to applicable standards or be indicated as acceptable by the established standards of the Underwriters' Laboratories, Inc. or other electrical product testing laboratories which are accredited by the department.

          (2) Residential buildings or structures moved into or within a county, city, or town are not required to comply with all of the requirements of this chapter, if the original occupancy classification of the building or structure is not changed as a result of the move.  This subsection shall not apply to residential buildings or structures that are substantially remodeled or rehabilitated.

          (3) This chapter shall not limit the authority or power of any city or town to enact and enforce under authority given by law, any ordinance, rule, or regulation requiring an equal, higher, or better standard of construction and an equal, higher, or better standard of materials, devices, appliances, and equipment than that required by this chapter.  A city or town shall require that its electrical inspectors meet the qualifications provided for state electrical inspectors in accordance with RCW 19.28.070.  In a city or town having an equal, higher, or better standard the installations, materials, devices, appliances, and equipment shall be in accordance with the ordinance, rule, or regulation of the city or town.  Electrical equipment associated with spas, hot tubs, and swimming pools((, and hydromassage bathtubs)) shall not be offered for sale or exchange unless the electrical equipment is certified as being in compliance with the applicable product safety standard by bearing the certification mark of an approved electrical products testing laboratory.  Hydromassage bathtubs shall not be offered for sale or exchange unless the complete unit, including both the tub and electrical equipment, is certified as being in compliance with applicable product safety standards by bearing the certification mark of an approved electrical products testing laboratory.

          (4) Nothing in this chapter may be construed as permitting the connection of any conductor of any electric circuit with a pipe that is connected with or designed to be connected with a waterworks piping system, without the consent of the person or persons legally responsible for the operation and maintenance of the waterworks piping system.

                                                           --- END ---