AN ACT Relating to exempting computer wires and fiber optic cables from electrical wiring requirements; and amending RCW 19.28.010, 19.28.200, and 19.28.610.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF WASHINGTON:

Sec. 1. RCW 19.28.010 and 1993 c 275 s 2 are each amended to read as follows:

(1) All wires and equipment, and installations thereof, that convey electric current and installations of equipment to be operated by electric current, in, on, or about buildings or structures, except for noncomposite fiber optic cables, telephone, telegraph, radio, and television wires and equipment, and television antenna installations, signal strength amplifiers, and coaxial installations pertaining thereto shall be in strict conformity with this chapter, the statutes of the state of Washington, and the rules issued by the department, and shall be in conformity with approved methods of construction for safety to life and property. All wires and equipment that fall within section 90.2(b)(5) of the National Electrical Code, 1981 edition, are exempt from the requirements of this chapter. The regulations and articles in the National Electrical Code, the national electrical safety code, and other installation and safety regulations approved by the national fire protection association, as modified or supplemented by rules issued by the department in furtherance of safety to life and property under authority hereby granted, shall be prima facie evidence of the approved methods of construction. All materials, devices, appliances, and equipment used in such installations shall be of a type that conforms to applicable standards or be indicated as acceptable by the established standards of any electrical product testing laboratory which is accredited by the department. Industrial control panels, utilization equipment, and their components do not need to be listed, labeled, or otherwise indicated as acceptable by an accredited electrical product testing laboratory unless specifically required by the National Electrical Code, 1993 edition.

(2) Residential buildings or structures moved into or within a county, city, or town are not required to comply with all of the requirements of this chapter, if the original occupancy classification of the building or structure is not changed as a result of the move. This subsection shall not apply to residential buildings or structures that are substantially remodeled or rehabilitated.

(3) This chapter shall not limit the authority or power of any city or town to enact and enforce under authority given by law, any ordinance, rule, or regulation requiring an equal, higher, or better standard of construction and an equal, higher, or better standard of materials, devices, appliances, and equipment than that required by this chapter. A city or town shall require that its electrical inspectors meet the qualifications provided for state electrical inspectors in accordance with RCW 19.28.070. In a city or town having an equal, higher, or better standard the installations, materials, devices, appliances, and equipment shall be in accordance with the ordinance, rule, or regulation of the city or town. Electrical equipment associated with spas, hot tubs, swimming pools, and hydromassage bathtubs shall not be offered for sale or exchange unless the electrical equipment is certified as being in compliance with the applicable product safety standard by bearing the certification mark of an approved electrical products testing laboratory.

(4) Nothing in this chapter may be construed as permitting the connection of any conductor of any electric circuit with a pipe that is connected with or designed to be connected with a waterworks piping system, without the consent of the person or persons legally responsible for the operation and maintenance of the waterworks piping system.

Sec. 2. RCW 19.28.200 and 1992 c 240 s 1 are each amended to read as follows:

(1) No license under the provision of this chapter shall be required from any utility or any person, firm, partnership, corporation, or other entity employed by a utility because of work in connection with the installation, repair, or maintenance of lines, wires, apparatus, or equipment owned by or under the control of a utility and used for transmission or distribution of electricity from the source of supply to the point of contact at the premises and/or property to be supplied and service connections and meters and other apparatus or appliances used in the measurement of the consumption of electricity by the customer.

(2) No license under the provisions of this chapter shall be required from any utility because of work in connection with the installation, repair, or maintenance of the following:

(a) Lines, wires, apparatus, or equipment used in the lighting of streets, alleys, ways, or public areas or squares;

(b) Lines, wires, apparatus, or equipment owned by a commercial, industrial, or public institution customer that are an integral part of a transmission or distribution system, either overhead or underground, providing service to such customer and located outside the building or structure: PROVIDED, That a utility does not initiate the sale of services to perform such work;

(c) Lines and wires, together with ancillary apparatus, and equipment, owned by a customer that is an independent power producer who has entered into an agreement for the sale of electricity to a utility and that are used in transmitting electricity from an electrical generating unit located on premises used by such customer to the point of interconnection with the utility's system.

(3) Any person, firm, partnership, corporation, or other entity licensed under RCW 19.28.120 may enter into a contract with a utility for the performance of work under subsection (2) of this section.

(4) No license under the provisions of this chapter shall be required from any person, firm, partnership, corporation, or other entity because of the work of installing and repairing ignition or lighting systems for motor vehicles.

(5) No license under the provisions of this chapter shall be required from any person, firm, partnership, corporation, or other entity because of work in connection with the installation, repair, or maintenance of wires and equipment, and installations thereof, exempted in RCW 19.28.010.

(6) No license under the provisions of this chapter shall be required from any person, firm, partnership, corporation, or other entity because of work in connection with the installation, repair, or maintenance of structured communication cabling. For purposes of this section, "structured communication cabling" means twisted pair copper and coaxial cables designed to support analog and digital voice applications, data, local area networks, and video. "Structured communication cabling" does not include the following, all of which are subject to this chapter: Fire protection signaling systems, intrusion alarms, patient monitoring systems, and energy management control systems. Installation of structured communications cabling is subject to adopted electrical installations standards and inspections under RCW 19.28.210.

Sec. 3. RCW 19.28.610 and 1994 c 157 s 1 are each amended to read as follows:

Nothing in RCW 19.28.510 through 19.28.620 shall be construed to require that a person obtain a license or a certified electrician in order to do electrical work at his or her residence or farm or place of business or on other property owned by him or her unless the electrical work is on the construction of a new building intended for rent, sale, or lease. However, if the construction is of a new residential building with up to four units intended for rent, sale, or lease, the owner may receive an exemption from the requirement to obtain a license or use a certified electrician if he or she provides a signed affidavit to the department stating that he or she will be performing the work and will occupy one of the units as his or her principal residence. The owner shall apply to the department for this exemption and may only receive an exemption once every twenty-four months. It is intended that the owner receiving this exemption shall occupy the unit as his or her principal residence for twenty-four months after completion of the units. Nothing in RCW 19.28.510 through 19.28.620 shall be intended to derogate from or dispense with the requirements of any valid electrical code enacted by a city or town pursuant to RCW 19.28.010(3), except that no code shall require the holder of a certificate of competency to demonstrate any additional proof of competency or obtain any other license or pay any fee in order to engage in the electrical construction trade. RCW 19.28.510 through 19.28.620 shall not apply to common carriers subject to Part I of the Interstate Commerce Act, nor to their officers and employees. Nothing in RCW 19.28.510 through 19.28.620 shall be deemed to apply to the installation or maintenance of telephone, telegraph, radio, or television wires and equipment; nor to any electrical utility or its employees in the installation, repair, and maintenance of electrical wiring, circuits, and equipment by or for the utility, or comprising a part of its plants, lines or systems. The licensing provisions of RCW 19.28.510 through 19.28.620 shall not apply to:

(1) Persons making electrical installations on their own property or to regularly employed employees working on the premises of their employer, unless the electrical work is on the construction of a new building intended for rent, sale, or lease; or

(2) Employees of an employer while the employer is performing utility type work of the nature described in RCW 19.28.200 so long as such employees have registered in the state of Washington with or graduated from a state-approved outside lineman apprenticeship course that is recognized by the department and that qualifies a person to perform such work; or

(3) Persons, firms, partnerships, corporations, or other entities engaged in the installation, repair, or maintenance of structured communication cabling as defined in RCW 19.28.200(6).

Nothing in RCW 19.28.510 through 19.28.620 shall be construed to restrict the right of any householder to assist or receive assistance from a friend, neighbor, relative or other person when none of the individuals doing the electrical installation hold themselves out as engaged in the trade or business of electrical installations. Nothing precludes any person who is exempt from the licensing requirements of this chapter under this section from obtaining a journeyman or specialty certificate of competency if they otherwise meet the requirements of this chapter.