HOUSE BILL REPORT
ESHB 1302
As Passed House:
March 10, 2005
Title: An act relating to burn ban triggers.
Brief Description: Modifying burn ban triggers.
Sponsors: By House Committee on Natural Resources, Ecology & Parks (originally sponsored by Representatives Kagi, Jarrett and B. Sullivan).
Brief History:
Natural Resources, Ecology & Parks: 2/4/05, 2/8/05 [DPS].
Floor Activity:
Passed House: 3/10/05, 64-32.
Brief Summary of Engrossed Substitute Bill |
|
HOUSE COMMITTEE ON NATURAL RESOURCES, ECOLOGY & PARKS
Majority Report: The substitute bill be substituted therefor and the substitute bill do pass. Signed by 8 members: Representatives B. Sullivan, Chair; Upthegrove, Vice Chair; Buck, Ranking Minority Member; Blake, Dickerson, Eickmeyer, Hunt and Williams.
Minority Report: Do not pass. Signed by 3 members: Representatives Kretz, Assistant Ranking Minority Member; DeBolt and Orcutt.
Staff: Jason Callahan (786-7117).
Background:
The Washington Clean Air Act (Act) regulates the use of wood stoves, fireplaces, and other
solid fuel burning devices. The Act prohibits the sale of solid fuel burning devices that do not
meet certain defined standards. Use of uncertified burning devices, which are those devices
that do not meet these standards, may generally continue if the device was purchased prior to
the sales prohibition.
The Act also establishes a two-phase burn ban. During a first stage burn ban, residential and
commercial buildings are prohibited from burning wood in any stove or fireplace that is not
certified. During a second phase burn ban, all buildings are prohibited from burning wood in
both certified and uncertified solid fuel burning devices. Buildings that do not have an
adequate source of heat without burning wood are allowed to burn wood during both first and
second phase burn bans.
Both the Department of Ecology (Department) and local air agencies have the authority to
declare first and second stage impaired air episodes. There are two triggers for a first stage
impaired air episode. The first trigger is a recorded measurement of particulates in the air that
are 10 microns or smaller at an average concentration of 60 micrograms per cubic meter over
24 hours. A first stage episode can also be triggered if carbon monoxide is measured at an
average ambient level concentration of eight parts per million over an eight hour period. A
second stage impaired air quality episode is triggered when the 24 hour average concentration
for particulates that are 10 microns or smaller reach a concentration of 105 micrograms per
cubic meter.
Summary of Engrossed Substitute Bill:
First Stage Burn Bans
The triggers for establishing a first and second stage burn ban are altered. The formula for
declaring a first stage ban is changed from measuring particulates sized 10 microns or smaller
at a concentration of greater than 60 micrograms per cubic meter, to measuring particulates
sized 2.5 microns or smaller at a concentration of 35 micrograms per cubic meter. In
addition to measuring the necessary concentration of fine particulates, a first state burn ban
can not be called unless the meteorological forecast predicts that the conditions for the
following 48 hours will not allow the levels of fine particulates to decline below a
concentration of 35 micrograms per cubic meter.
The carbon monoxide standard for allowing a first stage burn ban is removed. Only the fine
particulate measurements can trigger a burn ban.
Second Stage Burn Bans
The formula for declaring a second stage ban is changed from measuring particulates sized 10
microns or smaller at a concentration of greater than 105 micrograms per cubic meter, to
measuring particulates sized 2.5 microns or smaller at a concentration of 60 micrograms per
cubic meter. In addition to the measurement of fine particulates, a second stage burn ban can
not be given effect unless a first stage burn ban has been in force and proven insufficient to
reduce the rate of increase in the concentration of fine particulates in the air. Also, the
meteorological forecast must predict that the conditions for the following 48 hours will not
allow the levels of fine particulates to decline below the necessary trigger level.
Appropriation: None.
Fiscal Note: Not requested.
Effective Date: The bill takes effect 90 days after adjournment of session in which bill is passed.
Testimony For: Wood smoke is very dangerous to people with chronic respiratory
problems, and in some neighborhoods with narrow valleys, the accumulation of wood smoke
can be a health hazard. The control of wood smoke is a very important part of the state's
clean air programs. Wood smoke burn bans are only a reality in the state's most densely
populated counties, and a phase two burn ban has not been instated since 1991.
Hearth products must be used responsibly. Washington is a model for balancing the right to
use wood heat with the necessary protection of air quality. This bill does not change that
balance because it is primarily a technical change to remain consistent with a recently
amended federal law.
Testimony Against: None.
Persons Testifying: (In support) Edward Hosack, North West Hearth, Patio and Barbeque
Association; James Nolan and Mike Ryherd, Puget Sound Clean Air Agency; and Stu Clark,
Department of Ecology.
(With concerns) Bill Garvin, Washington Forest Protection Association.