Washington State Building Code.
The Washington State Building Code (Code) establishes minimum performance standards and requirements for construction and construction materials in the state, consistent with accepted standards of engineering, fire, and life safety. The Code comprises a number of model codes and standards, developed and published by international and national organizations, which are adopted by reference in the State Building Code Act (Act). Model codes and standards adopted in the Act include the International Building Code (IBC), the International Residential Code (IRC), and the State Energy Code.
The IBC establishes minimum requirements for all buildings except detached one- and two-family dwellings and townhouses up to three stories. The IRC comprises all building, plumbing, mechanical, fuel gas, and electrical requirements for one- and two-family dwellings and townhouses up to three stories.
The State Building Code Council (Council) is responsible for adopting, amending, and maintaining the model codes and standards adopted by reference in the Act. Amendments to the model codes and standards adopted by the Council are codified in the Washington Administrative Code. The Council reviews updated editions of each model code and standard every three years.
Efficiency Dwelling Units.
Efficiency dwelling units, defined by the Code, are units that have a minimum of 190 square feet of habitable space. Each dwelling unit must have at least one room greater than 120 square feet of net floor area. Sleeping units or other habitable rooms of the unit must have a net floor area greater than 70 square feet. Each efficiency dwelling unit must be provided with:
National Healthy Housing Standard.
The National Healthy Housing Standard (Standard) is published by the National Center for Healthy Housing and the American Public Health Association. The Standard recommends minimum performance requirements for housing including: duties of owners and occupants; structure, facilities, plumbing, and space requirements; safety and personal security; lighting and electrical systems; thermal comfort, ventilation, and energy efficiency; moisture control, solid waste, and pest management; and chemical and radiological agents. The Standard recommends that each dwelling unit provide privacy and adequate space for sleeping and living and that every habitable room have a minimum floor area of 70 square feet.
The Council must convene two technical advisory groups to recommend changes to the Code. The first technical advisory group must recommend additions or amendments to rules or codes that are necessary to apply the Washington State Residential Code to multiplex housing. The recommendations must include those code changes necessary to ensure public health and safety in multifamily housing under the IRC and must consider life safety systems and accessibility requirements for multiplex housing in the Code.
The second technical advisory group must recommend amendments to the IBC that would allow for a minimum dwelling unit size that is less than the requirements for efficiency dwelling units in the IBC. The technical advisory group must consider aligning the Code sections related to interior environment with the relevant sections of the Standard. When developing the recommendations, the technical advisory group must review the differences between the Code and the Standard and allow experts in public health and fire safety to comment during the process.
Both technical advisory groups must provide their recommendations to the Council in time for the Council to adopt or amend rules or codes as necessary for implementation in the 2024 IBC. The Council must take action to adopt additions and amendments to rules or codes as necessary by November 1, 2026.
The Office of Regulatory Innovation and Assistance must contract with a qualified external consultant or entity to develop a standard energy code plan set demonstrating a prescriptive compliance pathway that will meet or exceed all energy code regulations for residential housing subject to the IRC. The standard energy code plan set may be used by local governments and building industries. In developing the standard energy code plan set, the consultant must seek feedback from cities, counties, building industries, and building officials. The standard plan set must be completed by June 30, 2025.
(In support) This bill contains a variety of provisions to make building housing more efficient and more cost-effective. Making multifamily housing harder to build and encouraging single-family homes is rooted in racial discrimination. Multiplex housing has not always been covered by the IBC, and it was only changed to make it harder to build multifamily residences. Buildings with three to six units are not structurally very different than buildings with one or two units. Using the IRC for multiplexes does not compromise safety as multiplexes do not need to meet skyscraper standards. The building code is a barrier to middle housing. The building code also dictates how small is too small for a dwelling unit. Minimum dwelling unit sizes are not based on health and safety issues and were arbitrarily established when trying to ban certain types of housing, like rooming houses and single-room occupancies. Passive House is the most energy efficient standard in the world, even before energy generating measures, such as solar panels, are considered. Passive houses are not very much more expensive to build than regular housing, but development regulations make them more difficult to build. Inches matter in construction and affect the number and quality of units. The state needs housing for people and not parking for cars. In some areas, nearly every single-family home is required to be built with a two-car garage. Garages are expensive to build. This bill does not ban off-street parking but instead leaves it to the discretion of builders who build very energy efficient homes. Developers can choose to add parking where it makes sense and where the market demands.
(Opposed) None.
(Other) Balancing competing interests is a job most appropriate for local governments. Cities and counties generally support the sections related to changing the Code, including moving middle housing under the IRC. The Council has struggled to enact some types of regulations, and the language in the bill should be clarified. New housing of any type should not need modified setback requirements, and the language should clarify that the setback modifications are from the property line, not other buildings. Setback modifications should not be required if they would intrude on neighbors or create health and safety issues. Most households in the state have cars, and cities should be allowed to regulate parking. Rural roads have ditches, and counties need to be able to regulate parking as a safety concern. It would be very difficult to measure floor area from the interior wall, and it makes sense to allow extra area on the outside instead.
(In support) The bill would permit the use of the International Residential Code for smaller structures to improve housing stock in the state. The bill would allow multiplexes to be built using residential codes. More homes could be delivered to lower-income families. This will address the housing crisis. Retrofitting, expanding, and updating homes is better than demolishing them. This would reduce construction costs and support sustainable design. The bill would update overly onerous building codes that apply to middle housing.
(Opposed) None.
(In support) Representative Davina Duerr, prime sponsor; David Neiman, Neiman Taber Architects; Rob Harrison; Dan Bertolet, Sightline Institute; Ryan Donohue, Habitat for Humanity Seattle—King and Kittitas Counties; Kevin Maas; Alex Hur, Master Builders Association of King and Snohomish Counties; Markus Johnson; Bryce Yadon, Futurewise; Matt Hutchins; and Cary Westerbeck.
Ryan Donohue, Habitat for Humanity Seattle-King and Kittitas Counties; Ruth Williams; Bill Stauffacher, Building Industry Association of Washington; Bryce Yadon, Futurewise; and Dan Bertolet, Sightline Institute.