|
| WAC Sections |
| 296-150V-0010 | Authority, purpose, and scope. |
| 296-150V-0020 | What definitions apply to this chapter? |
| 296-150V-0030 | How is this chapter enforced? |
| 296-150V-0040 | Is manufacturing information kept confidential? |
| 296-150V-0050 | Can you prohibit the sale or lease of a conversion vendor unit or medical unit? |
| 296-150V-0060 | Who handles consumer complaints about conversion vendor units or medical units? |
| 296-150V-0070 | Do you have reciprocal agreements with other states to inspect conversion vendor units and medical units? |
| 296-150V-0080 | Do you allow a local enforcement agency to inspect conversion vendor units and medical units at the manufacturing location? |
| 296-150V-0100 | What happens if I disagree with your decision regarding my compliance with this chapter? |
| 296-150V-0110 | Do you have an advisory board to address conversion vendor unit and medical unit issues? |
| 296-150V-0120 | Where can I obtain technical assistance regarding conversion vendor units or medical units? |
| 296-150V-0140 | Do you allow the use of alternate materials, design, or method of construction? |
| 296-150V-0200 | Who must obtain conversion vendor unit or medical unit insignia? |
| 296-150V-0210 | What are the insignia requirements? |
| 296-150V-0220 | How do I obtain insignia information and the required forms? |
| 296-150V-0230 | What are the insignia application requirements? |
| 296-150V-0240 | What documentation do you need to perform an alteration inspection? |
| 296-150V-0250 | How do I replace lost or damaged insignia? |
| 296-150V-0300 | When is design-plan approval required? |
| 296-150V-0310 | Who can approve design plans? |
| 296-150V-0320 | What must I provide with my request for conversion vendor unit or medical unit design-plan approval by the department? |
| 296-150V-0340 | When is an engineering analysis or structural load test for design plans required? |
| 296-150V-0350 | What must test procedures and results for design plans include? |
| 296-150V-0380 | What happens if you approve my design plan? |
| 296-150V-0390 | If my design plan is not approved, how much time do I have to submit a corrected design plan? |
| 296-150V-0400 | What happens after my design plan is approved? |
| 296-150V-0410 | When does my design plan expire? |
| 296-150V-0415 | Who approves addendums to design plans? |
| 296-150V-0495 | Contractor deposit accounts. |
| 296-150V-0500 | When is an inspection required? |
| 296-150V-0510 | How do I request an inspection? |
| 296-150V-0520 | What happens if my conversion vendor unit or medical unit passes inspection? |
| 296-150V-0530 | Am I charged if I request an inspection but I am not prepared? |
| 296-150V-0540 | Who inspects a conversion vendor unit or medical unit installation at the building site or event location? |
| 296-150V-0550 | Do you allow a conversion vendor unit or medical unit to be completed at the installation site? |
| 296-150V-0560 | What happens if I receive a notice of noncompliance after inspection of the alteration to my conversion vendor unit or medical unit? |
| 296-150V-0580 | Must I obtain an insignia for used conversion vendor units or medical units? |
| 296-150V-0590 | How do I obtain insignia for used conversion vendor units or medical units? |
| 296-150V-0700 | Must manufacturers of conversion vendor units and medical units notify you if they manufacture at more than one location? |
| 296-150V-0710 | Must manufacturers of conversion vendor units and medical units notify you of a change in business name or address? |
| 296-150V-0720 | Must manufacturers of conversion vendor units and medical units notify you of a change in business ownership? |
| 296-150V-0800 | What codes apply to conversion vendor units or medical units? |
| 296-150V-0930 | When are structural load tests or structural calculations required? |
| 296-150V-0950 | What requirements apply to roof coverings? |
| 296-150V-1040 | Are there floor requirements? |
| 296-150V-1070 | What requirements apply to floor closure material? |
| 296-150V-1090 | What are the standards for equipment and installations? |
| 296-150V-1100 | What are the flame-spread limitations? |
| 296-150V-1110 | Combustible limitations. |
| 296-150V-1120 | What are the standards for wall and cabinet protection? |
| 296-150V-1170 | What are the light and ventilation requirements? |
| 296-150V-1180 | What requirements apply to conversion vendor unit exits? |
| 296-150V-1185 | What exit door requirements apply to self-propelled medical unit exits? |
| 296-150V-1190 | Interior privacy locks. |
| 296-150V-1303 | How must storage batteries be installed in a conversion vendor unit or medical unit? |
| 296-150V-1330 | What are the mechanical requirements for a conversion vendor unit or medical unit? |
| 296-150V-1350 | What are the LPG system enclosure and mounting requirements for a conversion vendor unit or medical unit? |
| 296-150V-1360 | What are the fuel gas piping design requirements for a conversion vendor unit or medical unit? |
| 296-150V-1380 | Can gas tubing be concealed in a conversion vendor unit or medical unit? |
| 296-150V-1390 | What are the pipe-joint compound requirements for gas piping in a conversion vendor unit or medical unit? |
| 296-150V-1400 | What are the gas piping hanger and support requirements for a conversion vendor unit or medical unit? |
| 296-150V-1410 | What are the electrical bonding requirements for gas piping in a conversion vendor unit or medical unit? |
| 296-150V-1420 | How are gas supply connections in a conversion vendor unit or medical unit identified? |
| 296-150V-1430 | What requirements apply to gas piping system openings? |
| 296-150V-1440 | Are gas piping shut-off valves required in a conversion vendor unit or medical unit? |
| 296-150V-1450 | What requirements apply to testing for gas piping leaks before conversion vendor unit or medical unit appliances are connected? |
| 296-150V-1460 | What requirements apply to testing for gas piping leaks after conversion vendor unit or medical unit appliances are connected? |
| 296-150V-1470 | What are the requirements for appliance installations? |
| 296-150V-1530 | What general plumbing requirements apply? |
| 296-150V-1540 | What are the plumbing definitions? |
| 296-150V-1550 | What requirements apply to drain outlets? |
| 296-150V-1560 | What is the minimum clearance for drain outlets? |
| 296-150V-1570 | What requirements apply to water-supply connections? |
| 296-150V-1580 | What requirements apply to water heater relief valves and safety devices? |
| 296-150V-1590 | What requirements apply to waste holding tanks for conversion vendor units? |
| 296-150V-1600 | What are the requirements associated with medical and conversion vending units that have been manufactured and used outside the state according to RCW 43.22.380? |
| 296-150V-3000 | Conversion vendor units and medical units—Fees. |
| |
| 296-150V-0205 | Can I obtain an exempt vendor/medical insignia? [Statutory Authority: Chapter 43.22 RCW and 2003 c 291. WSR 05-01-102, § 296-150V-0205, filed 12/14/04, effective 2/1/05.] Repealed by WSR 16-13-119, filed 6/21/16, effective 6/21/16. Statutory Authority: Chapter 43.22 RCW. |
| 296-150V-1220 | What code and installation requirements apply to conversion vendor unit or medical unit electrical systems? [Statutory Authority: RCW 43.22.340, 43.22.350, 43.22.355, 43.22.360, 43.22.400, 43.22.432, 43.22.433, 43.22.434, 43.22.450, 43.22.480, and 43.22.485. WSR 00-17-148, § 296-150V-1220, filed 8/22/00, effective 9/30/00. Statutory Authority: Chapter 43.22 RCW. WSR 99-18-069, § 296-150V-1220, filed 8/31/99, effective 10/1/99.] Repealed by WSR 03-12-044, filed 5/30/03, effective 6/30/03. Statutory Authority: RCW 43.22.340, 43.22.400, 43.22.432, 43.22.433, 43.22.434, 43.22.480, and 43.22.485, 2002 c 268, and chapter 43.22 RCW. |