WAC Sections | |
51-11R-10000 | Chapter 1 RE—Scope and administration. |
51-11R-10100 | Section R101—Scope and general requirements. |
51-11R-10200 | Section R102—Alternative materials, design and methods of construction and equipment. |
51-11R-10300 | Section R103—Construction documents. |
51-11R-10400 | Section R104—Fees. |
51-11R-10500 | Section R105—Inspections. |
51-11R-10600 | Section R106—Notice of approval. |
51-11R-10700 | Section R107—Validity. |
51-11R-10800 | Section R108—Referenced standards. |
51-11R-10900 | Section R109—Stop work order. |
51-11R-11000 | Section R110—Means of appeal. |
51-11R-11100 | Section R111—Violations. |
51-11R-11200 | Section R112—Liability. |
51-11R-20000 | Chapter 2 RE—Definitions. |
51-11R-20100 | Section R201—General. |
51-11R-20200 | Section R202—General definitions. |
51-11R-20201 | Section R202.1—A. |
51-11R-20202 | Section R202.2—B. |
51-11R-20203 | Section R202.3—C. |
51-11R-20204 | Section R202.4—D. |
51-11R-20205 | Section R202.5—E. |
51-11R-20206 | Section R202.6—F. |
51-11R-20207 | Section R202.7—G. |
51-11R-20208 | Section R202.8—H. |
51-11R-20209 | Section R202.9—I. |
51-11R-20210 | Section R202.10—J. |
51-11R-20211 | Section 202.11—K. |
51-11R-20212 | Section R202.12—L. |
51-11R-20213 | Section R202.13—M. |
51-11R-20214 | Section R202.14—N. |
51-11R-20215 | Section R202.15—O. |
51-11R-20216 | Section R202.16—P. |
51-11R-20217 | Section R202.17—Q. |
51-11R-20218 | Section R202.18—R. |
51-11R-20219 | Section R202.19—S. |
51-11R-20220 | Section R202.20—T. |
51-11R-20221 | Section R202.21—U. |
51-11R-20222 | Section R202.22—V. |
51-11R-20223 | Section R202.23—W. |
51-11R-20224 | Section R202.24—XYZ. |
51-11R-30000 | Chapter 3 RE—General requirements. |
51-11R-30100 | Section R301—Climate zones. |
51-11R-30200 | Section R302—Design conditions. |
51-11R-30300 | Section R303—Materials, systems and equipment. |
51-11R-30310 | Section R303.1—Identification. |
51-11R-30311 | Table R303.1.3(1)—Default glazed fenestration U-factor. |
51-11R-30312 | Table R303.1.3(2)—Default opaque door U-factors. |
51-11R-30313 | Table R303.1.3(3)—Default glazed fenestration SHGC and VT. |
51-11R-30314 | Table R303.1.3(4)—Default U-factors for skylights. |
51-11R-30315 | Table R303.1.3(5)—Small business compliance default table. |
51-11R-30320 | Section R303.2—Installation. |
51-11R-30330 | Section R303.3—Maintenance information. |
51-11R-40000 | Chapter 4 RE—Residential energy efficiency. |
51-11R-40100 | Section R401—General. |
51-11R-40200 | Section R402—Building thermal envelope. |
51-11R-40210 | Section R402.1—General. |
51-11R-40211 | Table R402.1.2—Insulation and fenestration requirements by component. |
51-11R-40213 | Table R402.1.3—Insulation minimum R-values and fenestration requirements by components. |
51-11R-40215 | Target/Proposed UA equations. |
51-11R-40220 | Section R402.2—Specific insulation requirements. |
51-11R-40230 | Section R402.3—Fenestration. |
51-11R-40240 | Section R402.4—Air leakage. |
51-11R-40241 | Table R402.4.1.1—Air barrier and insulation installation. |
51-11R-40250 | Section R402.5—Maximum fenestration U-factor and SHGC. |
51-11R-40300 | Section R403—Systems. |
51-11R-40310 | Section R403.1—Controls. |
51-11R-40315 | Section R403.2—Hot water boiler. |
51-11R-40320 | Section R403.3—Ducts. |
51-11R-40330 | Section R403.4—Mechanical system piping insulation. |
51-11R-40340 | Section R403.5—Service hot water systems. |
51-11R-40350 | Section R403.6—Mechanical ventilation. |
51-11R-40351 | Table R403.6.1—Mechanical ventilation system fan efficacy. |
51-11R-40360 | Section R403.7—Equipment sizing. |
51-11R-40370 | Section R403.8—Systems serving multiple dwelling units. |
51-11R-40380 | Section R403.9—Snow melt system controls. |
51-11R-40390 | Section R403.10—Pool and spa energy consumption. |
51-11R-40391 | Section R403.10—Other pools and spas. |
51-11R-40392 | Section R403.13—Heat pump space heating. |
51-11R-40400 | Section R404—Electrical power and lighting systems. |
51-11R-40410 | Section R404.1—Lighting equipment. |
51-11R-40500 | Section R405—Total building performance. |
51-11R-40510 | Section R405.1—Scope. |
51-11R-40520 | Section R405.2—Performance based compliance. |
51-11R-40530 | Section R405.3—Documentation. |
51-11R-40540 | Section R405.4—Calculation procedure. |
51-11R-40550 | Section R405.5—Calculation procedure. |
51-11R-40551 | Table R405.4.2(1)—Specifications for the standard reference and proposed designs. |
51-11R-40552 | Table R405.4.2(2)—Default distribution system efficiencies for proposed designs. |
51-11R-40560 | Section R405.5—Calculation software tools. |
51-11R-40600 | Section R406—Additional energy efficiency requirements. |
51-11R-40610 | Section R406.1—Scope. |
51-11R-40620 | Section R406.3—Additional energy efficiency requirements. |
51-11R-40621 | Table R406.3—Energy credits. |
51-11R-40700 | Section R407—Certified passive house. |
51-11R-50000 | Chapter 5—Existing buildings. |
51-11R-50100 | Section R501—General. |
51-11R-50200 | Section R502—Additions. |
51-11R-50300 | Section R503—Alterations. |
51-11R-50400 | Section R504—Repairs. |
51-11R-50500 | Section R505—Change of occupancy or use. |
51-11R-51000 | Chapter 6—Referenced standards. |
51-11R-58000 | Appendix RA—Optional energy efficiency measures—One step. |
51-11R-59000 | Appendix RB—Optional energy efficiency measures—Two step. |
51-11R-60000 | Appendix RC—Exterior design conditions. |
51-11R-60100 | Table RC-1—Outdoor design temperatures for Washington. |