(Effective until March 15, 2024)
Section 2107—Allowable stress design.
2107.1 General. The design of masonry structures using allowable stress design shall comply with Sections 2106 and the requirements of Chapters 1 through 8 of TMS 402/ACI 530/ASCE 5 except as modified by Sections 2107.2 through 2107.3.
2107.2 TMS 402/ACI 530/ASCE 5, Section 2.1.8.7.1.1, lap splices. In lieu of Section 2.1.8.7.1.1, it shall be permitted to design lap splices in accordance with Section 2107.2.1.
[Statutory Authority: RCW
19.27.031 and
19.27.074. WSR 20-21-021, § 51-50-21070, filed 10/9/20, effective 11/9/20; WSR 20-01-090, § 51-50-21070, filed 12/12/19, effective 7/1/20; WSR 16-03-064, § 51-50-21070, filed 1/19/16, effective 7/1/16. Statutory Authority: RCW
19.27.031 and chapters
19.27 and
34.05 RCW. WSR 13-04-067, § 51-50-21070, filed 2/1/13, effective 7/1/13. Statutory Authority: RCW
19.27.031 and
19.27.074. WSR 10-03-097, § 51-50-21070, filed 1/20/10, effective 7/1/10.]
(Effective March 15, 2024)
Reserved.
[Statutory Authority: RCW
19.27.031,
19.27.074, and
19.27.540. WSR 23-02-073, 23-12-103, and 23-20-023, § 51-50-21070, filed 1/4/23, 6/7/23, and 9/25/23, effective 3/15/24. Statutory Authority: RCW
19.27.031 and
19.27.074. WSR 20-21-021, § 51-50-21070, filed 10/9/20, effective 11/9/20; WSR 20-01-090, § 51-50-21070, filed 12/12/19, effective 7/1/20; WSR 16-03-064, § 51-50-21070, filed 1/19/16, effective 7/1/16. Statutory Authority: RCW
19.27.031 and chapters
19.27 and
34.05 RCW. WSR 13-04-067, § 51-50-21070, filed 2/1/13, effective 7/1/13. Statutory Authority: RCW
19.27.031 and
19.27.074. WSR 10-03-097, § 51-50-21070, filed 1/20/10, effective 7/1/10.]