WSR 08-02-064

PERMANENT RULES

DEPARTMENT OF REVENUE


[ Filed December 28, 2007, 1:59 p.m. , effective January 1, 2008 ]


     Effective Date of Rule: January 1, 2008.

     Other Findings Required by Other Provisions of Law as Precondition to Adoption or Effectiveness of Rule: The stumpage value rule is required by statute (RCW 84.33.091) to be effective on January 1, 2008.

     Purpose: WAC 458-40-660 contains the stumpage values used by harvesters of timber to calculate the timber excise tax. This rule is being revised to provide the stumpage values to be used during the first half of 2008.

     Citation of Existing Rules Affected by this Order: Amending WAC 458-40-660 Timber excise tax -- Stumpage value tables -- Stumpage value adjustments.

     Statutory Authority for Adoption: RCW 82.01.060(2), 82.32.300, and 84.33.096.

     Other Authority: RCW 84.33.091.

      Adopted under notice filed as WSR 07-22-104 on November 6, 2007.

     A final cost-benefit analysis is available by contacting Mark Bohe, P.O. Box 47453, Olympia, WA 98504-7453, phone (360) 570-6133, fax (360) 586-0127, e-mail markbohe@dor.wa.gov.

     Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 1, Repealed 0.

     Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0;      Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 1, Repealed 0.

     Date Adopted: December 28, 2007.

Janis P. Bianchi

Assistant Director

Interpretations and

Technical Advice Division

OTS-1161.2


AMENDATORY SECTION(Amending WSR 07-14-095, filed 6/29/07, effective 7/1/07)

WAC 458-40-660   Timber excise tax--Stumpage value tables -- Stumpage value adjustments.   (1) Introduction. This rule provides stumpage value tables and stumpage value adjustments used to calculate the amount of a harvester's timber excise tax.

     (2) Stumpage value tables. The following stumpage value tables are used to calculate the taxable value of stumpage harvested from ((July)) January 1 through ((December 31, 2007)) June 30, 2008:


((TABLE 1—Proposed Stumpage Value Table
Stumpage Value Area 1

July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$518
    
$511

$504

$497

$490
2 453 446 439 432 425
3 448 441 434 427 420
4 448 441 434 427 420

Western Redcedar(2)

RC

1

715

708

701

694

687

Western Hemlock(3)
WH 1 316 309 302 295 288
2 305 298 291 284 277
3 298 291 284 277 270
4 298 291 284 277 270

Red Alder

RA

1

544

537

530

523

516
2 510 503 496 489 482

Black Cottonwood

BC

1

72

65

58

51

44

Other Hardwood

OH

1

165

158

151

144

137

Douglas-Fir Poles & Piles

DFL

1

753

746

739

732

725

Western Redcedar Poles

RCL

1

1224

1217

1210

1203

1196

Chipwood(4)

CHW

1

5

4

3

2

1
RC Shake & Shingle Blocks(5)
RCS

1

164

157

150

143

136

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.


TABLE 2—Proposed Stumpage Value Table
Stumpage Value Area 2
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$518

$511

$504

$497

$490
2 458 451 444 437 430
3 458 451 444 437 430
4 458 451 444 437 430

Western Redcedar(2)

RC

1

715

708

701

694

687

Western Hemlock(3)

WH

1

316

309

302

295

288
2 316 309 302 295 288
3 315 308 301 294 287
4 315 308 301 294 287

Red Alder

RA

1

544

537

530

523

516
2 510 503 496 489 482

Black Cottonwood

BC

1

72

65

58

51

44

Other Hardwood

OH

1

165

158

151

144

137

Douglas-Fir Poles & Piles

DFL

1

753

746

739

732

725

Western Redcedar Poles

RCL

1

1224

1217

1210

1203

1196

Chipwood(4)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(5)

RCS

1

164

157

150

143

136

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.

TABLE 3—Proposed Stumpage Value Table
Stumpage Value Area 3
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$518

$511

$504

$497

$490
2 493 486 479 472 465
3 479 472 465 458 451
4 464 457 450 443 436

Western Redcedar(3)

RC

1

715

708

701

694

687

Western Hemlock and Other Conifer(4)

WH

1

316

309

302

295

288
2 316 309 302 295 288
3 313 306 299 292 285
4 313 306 299 292 285

Red Alder

RA

1

544

537

530

523

516
2 510 503 496 489 482

Black Cottonwood

BC

1

72

65

58

51

44

Other Hardwood

OH

1

165

158

151

144

137

Douglas-Fir Poles & Piles

DFL

1

753

746

739

732

725

Western Redcedar Poles

RCL

1

1224

1217

1210

1203

1196

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.


TABLE 4—Proposed Stumpage Value Table
Stumpage Value Area 4
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$575

$568

$561

$554

$547
2 498 491 484 477 470
3 479 472 465 458 451
4 461 454 447 440 433

Lodgepole Pine

LP

1

264

257

250

243

236

Ponderosa Pine

PP

1

296

289

282

275

268
2 208 201 194 187 180

Western Redcedar(3)

RC

1

715

708

701

694

687

Western Hemlock and Other Conifer(4)

WH

1

345

338

331

324

317
2 345 338 331 324 317
3 345 338 331 324 317
4 345 338 331 324 317

Red Alder

RA

1

544

537

530

523

516
2 510 503 496 489 482

Black Cottonwood

BC

1

72

65

58

51

44

Other Hardwood

OH

1

165

158

151

144

137

Douglas-Fir Poles & Piles

DFL

1

753

746

739

732

725

Western Redcedar Poles

RCL

1

1224

1217

1210

1203

1196

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 5—Proposed Stumpage Value Table
Stumpage Value Area 5
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$528

$521

$514

$507

$500
2 467 460 453 446 439
3 467 460 453 446 439
4 390 383 376 369 362

Lodgepole Pine

LP

1

264

257

250

243

236

Ponderosa Pine

PP

1

296

289

282

275

268
2 208 201 194 187 180

Western Redcedar(3)

RC

1

715

708

701

694

687

Western Hemlock and Other Conifer(4)

WH

1

316

309

302

295

288
2 307 300 293 286 279
3 293 286 279 272 265
4 217 210 203 196 189

Red Alder

RA

1

544

537

530

523

516
2 510 503 496 489 482

Black Cottonwood

BC

1

72

65

58

51

44

Other Hardwood

OH

1

165

158

151

144

137

Douglas-Fir Poles & Piles

DFL

1

753

746

739

732

725

Western Redcedar Poles

RCL

1

1224

1217

1210

1203

1196

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 6—Proposed Stumpage Value Table
Stumpage Value Area 6
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$349

$342

$335

$328

$321

Lodgepole Pine

LP

1

264

257

250

243

236

Ponderosa Pine

PP

1

296

289

282

275

268
2 208 201 194 187 180

Western Redcedar(3)

RC

1

504

497

490

483

476

True Firs and Spruce(4)

WH

1

259

252

245

238

231

Western White Pine

WP

1

256

249

242

235

228

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

632

625

618

611

604

Small Logs(5)

SML

1

33

32

31

30

29

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCF


1


76


69


62


55


48


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 7—Proposed Stumpage Value Table
Stumpage Value Area 7
July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$349

$342

$335

$328

$321

Lodgepole Pine

LP

1

264

257

250

243

236

Ponderosa Pine

PP

1

296

289

282

275

268
2 208 201 194 187 180

Western Redcedar(3)

RC

1

504

497

490

483

476

True Firs and Spruce(4)

WH

1

259

252

245

238

231

Western White Pine

WP

1

256

249

242

235

228

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

632

625

618

611

604

Small Logs(5)

SML

1

33

32

31

30

29

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle

Blocks(6)


RCF


1


76


69


62


55


48


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 8—Proposed Stumpage Value Table
Stumpage Value Area 10

July 1 through December 31, 2007

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$561

$554

$547

$540

$533
2 484 477 470 463 456
3 465 458 451 444 437
4 447 440 433 426 419

Lodgepole Pine

LP

1

264

257

250

243

236

Ponderosa Pine

PP

1

296

289

282

275

268
2 208 201 194 187 180

Western Redcedar(3)

RC

1

701

694

687

680

673

Western Hemlock and Other Conifer(4)

WH

1

331

324

317

310

303
2 331 324 317 310 303
3 331 324 317 310 303
4 331 324 317 310 303

Red Alder

RA

1

530

523

516

509

502
2 496 489 482 475 468

Black Cottonwood

BC

1

58

51

44

37

30

Other Hardwood

OH

1

151

144

137

130

123

Douglas-Fir Poles & Piles

DFL

1

739

732

725

718

711

Western Redcedar Poles

RCL

1

1210

1203

1196

1189

1182

Chipwood(5)

CHW

1

5

4

3

2

1

RC Shake & Shingle Blocks(6)

RCS

1

164

157

150

143

136

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.))


TABLE 1—Proposed Stumpage Value Table
Stumpage Value Area 1

January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$481
    
$474

$467

$460

$453
2 413 406 399 392 385
3 400 393 386 379 372
4 350 343 336 329 322

Western Redcedar(2)

RC

1

736

729

722

715

708

Western Hemlock(3)
WH 1 300 293 286 279 272
2 300 293 286 279 272
3 295 288 281 274 267
4 295 288 281 274 267

Red Alder

RA

1

719

712

705

698

691
2 647 640 633 626 619

Black Cottonwood

BC

1

57

50

43

36

29

Other Hardwood

OH

1

181

174

167

160

153

Douglas-Fir Poles & Piles

DFL

1

774

767

760

753

746

Western Redcedar Poles

RCL

1

1384

1377

1370

1363

1356

Chipwood(4)

CHW

1

12

11

10

9

8
RC Shake & Shingle Blocks(5)
RCS

1

279

272

265

258

251

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.


TABLE 2—Proposed Stumpage Value Table
Stumpage Value Area 2
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$562

$555

$548

$541

$534
2 428 421 414 407 400
3 427 420 413 406 399
4 398 391 384 377 370

Western Redcedar(2)

RC

1

736

729

722

715

708

Western Hemlock(3)

WH

1

346

339

332

325

318
2 346 339 332 325 318
3 312 305 298 291 284
4 312 305 298 291 284

Red Alder

RA

1

719

712

705

698

691
2 647 640 633 626 619

Black Cottonwood

BC

1

57

50

43

36

29

Other Hardwood

OH

1

181

174

167

160

153

Douglas-Fir Poles & Piles

DFL

1

774

767

760

753

746

Western Redcedar Poles

RCL

1

1384

1377

1370

1363

1356

Chipwood(4)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(5)

RCS

1

279

272

265

258

251

RC & Other Posts(6)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(4) Stumpage value per ton.
(5) Stumpage value per cord.
(6) Stumpage value per 8 lineal feet or portion thereof.
(7) Stumpage value per lineal foot.

TABLE 3—Proposed Stumpage Value Table
Stumpage Value Area 3
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$461

$454

$447

$440

$433
2 444 437 430 423 416
3 443 436 429 422 415
4 371 364 357 350 343

Western Redcedar(3)

RC

1

736

729

722

715

708

Western Hemlock(4)

WH

1

346

339

332

325

318
2 346 339 332 325 318
3 288 281 274 267 260
4 274 267 260 253 246

Red Alder

RA

1

719

712

705

698

691
2 647 640 633 626 619

Black Cottonwood

BC

1

57

50

43

36

29

Other Hardwood

OH

1

181

174

167

160

153

Douglas-Fir Poles & Piles

DFL

1

774

767

760

753

746

Western Redcedar Poles

RCL

1

1384

1377

1370

1363

1356

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(6)

RCS

1

279

272

265

258

251

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce, true Fir species and Pines, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.


TABLE 4—Proposed Stumpage Value Table
Stumpage Value Area 4
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$589

$582

$575

$568

$561
2 462 455 448 441 434
3 443 436 429 422 415
4 327 320 313 306 299

Lodgepole Pine

LP

1

238

231

224

217

210

Ponderosa Pine

PP

1

285

278

271

264

257
2 198 191 184 177 170

Western Redcedar(3)

RC

1

736

729

722

715

708

Western Hemlock(4)

WH

1

338

331

324

317

310
2 338 331 324 317 310
3 338 331 324 317 310
4 338 331 324 317 310

Red Alder

RA

1

719

712

705

698

691
2 647 640 633 626 619

Black Cottonwood

BC

1

57

50

43

36

29

Other Hardwood

OH

1

181

174

167

160

153

Douglas-Fir Poles & Piles

DFL

1

774

767

760

753

746

Western Redcedar Poles

RCL

1

1384

1377

1370

1363

1356

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(6)

RCS

1

279

272

265

258

251

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 5—Proposed Stumpage Value Table
Stumpage Value Area 5
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$616

$609

$602

$595

$588
2 444 437 430 423 416
3 374 367 360 353 346
4 371 364 357 350 343

Lodgepole Pine

LP

1

238

231

224

217

210

Ponderosa Pine

PP

1

285

278

271

264

257
2 198 191 184 177 170

Western Redcedar(3)

RC

1

736

729

722

715

708

Western Hemlock(4)

WH

1

290

283

276

269

262
2 290 283 276 269 262
3 290 283 276 269 262
4 290 283 276 269 262

Red Alder

RA

1

719

712

705

698

691
2 647 640 633 626 619

Black Cottonwood

BC

1

57

50

43

36

29

Other Hardwood

OH

1

181

174

167

160

153

Douglas-Fir Poles & Piles

DFL

1

774

767

760

753

746

Western Redcedar Poles

RCL

1

1384

1377

1370

1363

1356

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(6)

RCS

1

279

272

265

258

251

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

TABLE 6—Proposed Stumpage Value Table
Stumpage Value Area 6
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$296

$289

$282

$275

$268

Lodgepole Pine

LP

1

238

231

224

217

210

Ponderosa Pine

PP

1

285

278

271

264

257
2 198 191 184 177 170

Western Redcedar(3)

RC

1

596

589

582

575

568

True Firs and Spruce(4)

WH

1

230

223

216

209

202

Western White Pine

WP

1

252

245

238

231

224

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

632

625

618

611

604

Small Logs(5)

SML

1

32

31

30

29

28

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(6)

RCF


1


76


69


62


55


48


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25


(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 7—Proposed Stumpage Value Table
Stumpage Value Area 7
January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$296

$289

$282

$275

$268

Lodgepole Pine

LP

1

238

231

224

217

210

Ponderosa Pine

PP

1

285

278

271

264

257
2 198 191 184 177 170

Western Redcedar(3)

RC

1

596

589

582

575

568

True Firs and Spruce(4)

WH

1

230

223

216

209

202

Western White Pine

WP

1

252

245

238

231

224

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

632

625

618

611

604

Small Logs(5)

SML

1

32

31

30

29

28

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle

Blocks(6)


RCF


1


76


69


62


55


48


LP & Other Posts(7)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(8)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(9)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(9) Stumpage value per lineal foot.


TABLE 8—Proposed Stumpage Value Table
Stumpage Value Area 10

January 1 through June 30, 2008

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$575

$568

$561

$554

$547
2 448 441 434 427 420
3 429 422 415 408 401
4 313 306 299 292 285

Lodgepole Pine

LP

1

238

231

224

217

210

Ponderosa Pine

PP

1

285

278

271

264

257
2 198 191 184 177 170

Western Redcedar(3)

RC

1

722

715

708

701

694

Western Hemlock(4)

WH

1

324

317

310

303

296
2 324 317 310 303 296
3 324 317 310 303 296
4 324 317 310 303 296

Red Alder

RA

1

705

698

691

684

677
2 633 626 619 612 605

Black Cottonwood

BC

1

43

36

29

22

15

Other Hardwood

OH

1

167

160

153

146

139

Douglas-Fir Poles & Piles

DFL

1

760

753

746

739

732

Western Redcedar Poles

RCL

1

1370

1363

1356

1349

1342

Chipwood(5)

CHW

1

12

11

10

9

8

RC Shake & Shingle Blocks(6)

RCS

1

279

272

265

258

251

RC & Other Posts(7)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(8)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(8)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes all Hemlock, Spruce and true Fir species, or any other conifer not listed in this table.
(5) Stumpage value per ton.
(6) Stumpage value per cord.
(7) Stumpage value per 8 lineal feet or portion thereof.
(8) Stumpage value per lineal foot.

     (3) Harvest value adjustments. The stumpage values in subsection (2) of this rule for the designated stumpage value areas are adjusted for various logging and harvest conditions, subject to the following:

     (a) No harvest adjustment is allowed for special forest products, chipwood, or small logs.

     (b) Conifer and hardwood stumpage value rates cannot be adjusted below one dollar per MBF.

     (c) Except for the timber yarded by helicopter, a single logging condition adjustment applies to the entire harvest unit. The taxpayer must use the logging condition adjustment class that applies to a majority (more than 50%) of the acreage in that harvest unit. If the harvest unit is reported over more than one quarter, all quarterly returns for that harvest unit must report the same logging condition adjustment. The helicopter adjustment applies only to the timber volume from the harvest unit that is yarded from stump to landing by helicopter.

     (d) The volume per acre adjustment is a single adjustment class for all quarterly returns reporting a harvest unit. A harvest unit is established by the harvester prior to harvesting. The volume per acre is determined by taking the volume logged from the unit excluding the volume reported as chipwood or small logs and dividing by the total acres logged. Total acres logged does not include leave tree areas (RMZ, UMZ, forested wetlands, etc.,) over 2 acres in size.

     (e) A domestic market adjustment applies to timber which meet the following criteria:

     (i) Public timber -- Harvest of timber not sold by a competitive bidding process that is prohibited under the authority of state or federal law from foreign export may be eligible for the domestic market adjustment. The adjustment may be applied only to those species of timber that must be processed domestically. According to type of sale, the adjustment may be applied to the following species:

     Federal Timber Sales: All species except Alaska-cedar. (Stat. Ref. - 36 C.F.R. 223.10)

     State, and Other Nonfederal, Public Timber Sales: Western Redcedar only. (Stat. Ref. - 50 U.S.C. appendix 2406.1)

     (ii) Private timber -- Harvest of private timber that is legally restricted from foreign export, under the authority of The Forest Resources Conservation and Shortage Relief Act (Public Law 101-382), (16 U.S.C. Sec. 620 et seq.); the Export Administration Act of 1979 (50 U.S.C. App. 2406(i)); a Cooperative Sustained Yield Unit Agreement made pursuant to the act of March 29, 1944 (16 U.S.C. Sec. 583-583i); or Washington Administrative Code (WAC 240-15-015(2)) is also eligible for the Domestic Market Adjustment.

     The following harvest adjustment tables apply from ((July)) January 1 through ((December 31, 2007)) June 30, 2008:


TABLE 9—Harvest Adjustment Table
Stumpage Value Areas 1, 2, 3, 4, 5, and 10

((July)) January 1 through ((December 31, 2007)) June 30, 2008


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of 30 thousand board feet or more per acre. $0.00
Class 2 Harvest of 10 thousand board feet to but not including 30 thousand board feet per acre. - $15.00
Class 3 Harvest of less than 10 thousand board feet per acre. - $35.00
II. Logging conditions
Class 1 Ground based logging a majority of the unit using tracked or wheeled vehicles or draft animals. $0.00
Class 2 Cable logging a majority of the unit using an overhead system of winch driven cables. - $30.00
Class 3 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
III. Remote island adjustment:
For timber harvested from a remote island - $50.00
IV. Thinning
Class 1 A limited removal of timber described in WAC 458-40-610 (28) -$100.00

TABLE 10—Harvest Adjustment Table
Stumpage Value Areas 6 and 7
((July)) January 1 through ((December 31, 2007)) June 30, 2008


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of more than 8 thousand board feet per acre. $0.00
Class 2 Harvest of 8 thousand board feet per acre and less. - $8.00
II. Logging conditions
Class 1 The majority of the harvest unit has less than 40% slope. No significant rock outcrops or swamp barriers. $0.00
Class 2 The majority of the harvest unit has slopes between 40% and 60%. Some rock outcrops or swamp barriers. -$20.00
Class 3 The majority of the harvest unit has rough, broken ground with slopes over 60%. Numerous rock outcrops and bluffs. -$30.00
Class 4 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
     Note: A Class 2 adjustment may be used for slopes less than 40% when cable logging is required by a duly promulgated forest practice regulation. Written documentation of this requirement must be provided by the taxpayer to the department of revenue.
III. Remote island adjustment:
For timber harvested from a remote island - $50.00

TABLE 11—Domestic Market Adjustment


Class Area Adjustment Applies Dollar Adjustment Per Thousand Board Feet Net Scribner Scale
Class 1: SVA's 1 through 6, and 10 $0.00
Class 2: SVA 7 $0.00

Note: The adjustment will not be allowed on special forest products.

     (4) Damaged timber. Timber harvesters planning to remove timber from areas having damaged timber may apply to the department of revenue for an adjustment in stumpage values. The application must contain a map with the legal descriptions of the area, an accurate estimate of the volume of damaged timber to be removed, a description of the damage sustained by the timber with an evaluation of the extent to which the stumpage values have been materially reduced from the values shown in the applicable tables, and a list of estimated additional costs to be incurred resulting from the removal of the damaged timber. The application must be received and approved by the department of revenue before the harvest commences. Upon receipt of an application, the department of revenue will determine the amount of adjustment to be applied against the stumpage values. Timber that has been damaged due to sudden and unforeseen causes may qualify.

     (a) Sudden and unforeseen causes of damage that qualify for consideration of an adjustment include:

     (i) Causes listed in RCW 84.33.091; fire, blow down, ice storm, flood.

     (ii) Others not listed; volcanic activity, earthquake.

     (b) Causes that do not qualify for adjustment include:

     (i) Animal damage, root rot, mistletoe, prior logging, insect damage, normal decay from fungi, and pathogen caused diseases; and

     (ii) Any damage that can be accounted for in the accepted normal scaling rules through volume or grade reductions.

     (c) The department of revenue will not grant adjustments for applications involving timber that has already been harvested but will consider any remaining undisturbed damaged timber scheduled for removal if it is properly identified.

     (d) The department of revenue will notify the harvester in writing of approval or denial. Instructions will be included for taking any adjustment amounts approved.

[Statutory Authority: RCW 82.01.060(2), 82.32.300, 84.33.096, and 84.33.091. 07-14-095, § 458-40-660, filed 6/29/07, effective 7/1/07; 07-02-039, § 458-40-660, filed 12/26/06, effective 1/1/07; 06-14-064, § 458-40-660, filed 6/30/06, effective 7/1/06; 06-02-005, § 458-40-660, filed 12/22/05, effective 1/1/06; 05-14-087, § 458-40-660, filed 6/30/05, effective 7/1/05; 05-02-040, § 458-40-660, filed 12/30/04, effective 1/1/05; 04-14-033, § 458-40-660, filed 6/29/04, effective 7/1/04; 04-01-125, § 458-40-660, filed 12/18/03, effective 1/1/04; 03-14-072, § 458-40-660, filed 6/26/03, effective 7/1/03. Statutory Authority: RCW 82.01.060(2), 82.32.300, 84.33.096, 84.33.091, and 84.33.140. 03-02-004, § 458-40-660, filed 12/19/02, effective 1/1/03. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 02-14-019, § 458-40-660, filed 6/21/02, effective 7/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091 and 84.33.120. 02-02-033, § 458-40-660, filed 12/24/01, effective 1/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 01-13-105, § 458-40-660, filed 6/20/01, effective 7/1/01; 01-02-020, § 458-40-660, filed 12/21/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091, 82.32.060, and 84.33.077. 00-19-067, § 458-40-660, filed 9/19/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096 and 84.33.091. 00-14-011, § 458-40-660, filed 6/27/00, effective 7/1/00; 00-02-019, § 458-40-660, filed 12/27/99, effective 1/1/00; 99-14-055, § 458-40-660, filed 6/30/99, effective 7/1/99; 99-02-032, § 458-40-660, filed 12/30/98, effective 1/1/99; 98-14-083, § 458-40-660, filed 6/30/98, effective 7/1/98; 98-02-015, § 458-40-660, filed 12/30/97, effective 1/1/98; 97-14-068, § 458-40-660, filed 6/30/97, effective 7/1/97. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.091. 97-02-069, § 458-40-660, filed 12/31/96, effective 1/1/97; 96-14-063, § 458-40-660, filed 6/28/96, effective 7/1/96; 96-02-057, § 458-40-660, filed 12/29/95, effective 1/1/96. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.200. 95-18-027, § 458-40-660, filed 8/25/95, effective 9/25/95. Statutory Authority: RCW 82.32.300 and 84.33.096. 95-02-038, § 458-40-660, filed 12/30/94, effective 1/1/95. Statutory Authority: RCW 84.33.091, 84.32.300 [82.32.300] and 84.33.096. 94-14-048, § 458-40-660, filed 6/30/94, effective 7/1/94; 94-02-047, § 458-40-660, filed 12/30/93, effective 1/1/94; 93-14-051, § 458-40-660, filed 6/30/93, effective 7/1/93; 93-02-025, § 458-40-660, filed 12/31/92, effective 1/1/93; 92-14-083, § 458-40-660, filed 6/29/92, effective 7/1/92; 92-02-067, § 458-40-660, filed 12/31/91, effective 1/1/92. Statutory Authority: RCW 84.33.096 and 82.32.300. 91-14-077, § 458-40-660, filed 6/28/91, effective 7/1/91; 91-09-030, § 458-40-660, filed 4/12/91, effective 5/13/91; 91-02-088, § 458-40-660, filed 12/31/90, effective 1/31/91; 90-14-033, § 458-40-660, filed 6/29/90, effective 7/30/90; 90-02-049, § 458-40-660, filed 12/29/89, effective 1/29/90. Statutory Authority: Chapter 84.33 RCW and RCW 84.33.091. 89-14-051 (Order FT-89-2), § 458-40-660, filed 6/30/89; 89-02-027 (Order FT-88-5), § 458-40-660, filed 12/30/88; 88-14-032 (Order FT-88-2), § 458-40-660, filed 6/30/88; 88-02-026 (Order FT-87-5), § 458-40-660, filed 12/31/87. Statutory Authority: Chapter 84.33 RCW. 87-14-042 (Order 87-2), § 458-40-660, filed 6/30/87; 87-02-023 (Order 86-4), § 458-40-660, filed 12/31/86.]

© Washington State Code Reviser's Office