WSR 01-13-105

PERMANENT RULES

DEPARTMENT OF REVENUE


[ Filed June 20, 2001, 10:11 a.m. , effective July 1, 2001 ]

Date of Adoption: June 20, 2001.

Purpose: WAC 458-40-660 contains the stumpage values used by harvesters of timber to calculate the timber excise tax. This rule is being revised to provide the stumpage values to be used during the second half of 2001.

Citation of Existing Rules Affected by this Order: Amending WAC 458-40-660.

Statutory Authority for Adoption: RCW 82.32.300 and 84.33.096.

Other Authority: RCW 84.33.091.

Adopted under notice filed as WSR 01-10-080 on May 1, 2001.

Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 0, Repealed 0.

Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 0, Repealed 0.

Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0; Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 1, Repealed 0.

Other Findings Required by Other Provisions of Law as Precondition to Adoption or Effectiveness of Rule: The stumpage value rule is required by statute (RCW 84.33.091) to be effective on July 1, 2001.
Effective Date of Rule: July 1, 2001.

June 20, 2001

Claire Hesselholt

Rules Manager

Legislation and Policy Division

OTS-4850.2


AMENDATORY SECTION(Amending WSR 01-02-020, filed 12/21/00, effective 1/1/01)

WAC 458-40-660   Timber excise tax--Stumpage value tables -- Stumpage value adjustments.   (1) Introduction. This rule provides stumpage value tables and stumpage value adjustments used to calculate the amount of a harvester's timber excise tax.

(2) Stumpage value tables. The following stumpage value tables are used to calculate the taxable value of stumpage harvested from ((January)) July 1 through ((June 30)) December 31, 2001:


((TABLE 1Stumpage Value Table

Stumpage Value Area 1

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


((Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$628

$621

$614

$607

$600
2 549 542 535 528 521
3 490 483 476 469 462
4 289 282 275 268 261

Western Redcedar(2)

RC

1

773

766

759

752

745

Western Hemlock and Other Conifer(3)
WH 1 568 561 554 547 540
2 354 347 340 333 326
3 334 327 320 313 306
4 289 282 275 268 261

Red Alder

RA

1

300

293

286

279

272
2 239 232 225 218 211

Black Cottonwood

BC

1

24

17

10

3

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

778

771

764

757

750

Western Redcedar Poles

RCL

1

778

771

764

757

750

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 2Stumpage Value Table

Stumpage Value Area 2

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$595

$588

$581

$574

$567
2 528 521 514 507 500
3 459 452 445 438 431
4 415 408 401 394 387

Western Redcedar(2)

RC

1

773

766

759

752

745

Western Hemlock and Other Conifer (3)

WH

1

636

629

622

615

608
2 379 372 365 358 351
3 356 349 342 335 328
4 326 319 312 305 298

Red Alder

RA

1

300

293

286

279

272
2 239 232 225 218 211

Black Cottonwood

BC

1

24

17

10

3

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

778

771

764

757

750

Western Redcedar Poles

RCL

1

778

771

764

757

750

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 3Stumpage Value Table

Stumpage Value Area 3

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$743

$736

$729

$722

$715
2 443 436 429 422 415
3 377 370 363 356 349
4 296 289 282 275 268

Western Redcedar(3)

RC

1

773

766

759

752

745

Western Hemlock and Other Conifer(4)

WH

1

356

349

342

335

328
2 334 327 320 313 306
3 283 276 269 262 255
4 283 276 269 262 255

Red Alder

RA

1

300

293

286

279

272
2 239 232 225 218 211

Black Cottonwood

BC

1

24

17

10

3

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

778

771

764

757

750

Western Redcedar Poles

RCL

1

778

771

764

757

750

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 4Stumpage Value Table

Stumpage Value Area 4

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$628

$621

$614

$607

$600
2 519 512 505 498 491
3 503 496 489 482 475
4 359 352 345 338 331

Lodgepole Pine

LP

1

244

237

230

223

216

Ponderosa Pine

PP

1

365

358

351

344

337
2 253 246 239 232 225

Western Redcedar(3)

RC

1

773

766

759

752

745

Western Hemlock and Other Conifer(4)

WH

1

568

561

554

547

540
2 347 340 333 326 319
3 332 325 318 311 304
4 311 304 297 290 283

Red Alder

RA

1

300

293

286

279

272
2 239 232 225 218 211

Black Cottonwood

BC

1

24

17

10

3

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

778

771

764

757

750

Western Redcedar Poles

RCL

1

778

771

764

757

750

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 5Stumpage Value Table

Stumpage Value Area 5

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$628

$621

$614

$607

$600
2 516 509 502 495 488
3 387 380 373 366 359
4 334 327 320 313 306

Lodgepole Pine

LP

1

244

237

230

223

216

Ponderosa Pine

PP

1

365

358

351

344

337
2 253 246 239 232 225

Western Redcedar(3)

RC

1

773

766

759

752

745

Western Hemlock and Other Conifer(4)

WH

1

568

561

554

547

540
2 372 365 358 351 344
3 317 310 303 296 289
4 303 296 289 282 275

Red Alder

RA

1

300

293

286

279

272
2 239 232 225 218 211

Black Cottonwood

BC

1

24

17

10

3

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

778

771

764

757

750

Western Redcedar Poles

RCL

1

778

771

764

757

750

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 6Stumpage Value Table

Stumpage Value Area 6

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$306

$299

$292

$285

$278

Lodgepole Pine

LP

1

244

237

230

223

216

Ponderosa Pine

PP

1

365

358

351

344

337
2 253 246 239 232 225

Western Redcedar(3)

RC

1

405

398

391

384

377

True Firs and Spruce(4)

WH

1

248

241

234

227

220

Western White Pine

WP

1

408

401

394

387

380

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

27

26

25

24

23

Chipwood

CHW

1

2

1

1

1

1

RC Shake & Shingle Blocks

RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 7Stumpage Value Table

Stumpage Value Area 7

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$317

$310

$303

$296

$289

Lodgepole Pine

LP

1

251

244

237

230

223

Ponderosa Pine

PP

1

392

385

378

371

364
2 298 291 284 277 270

Western Redcedar(3)

RC

1

405

398

391

384

377

True Firs and Spruce(4)

WH

1

268

261

254

247

240

Western White Pine

WP

1

408

401

394

387

380

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

24

23

22

21

20

Chipwood

CHW

1

2

1

1

1

1

RC Shake & Shingle

Blocks


RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 8Stumpage Value Table

Stumpage Value Area 10

January 1 through June 30, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$614

$607

$600

$593

$586
2 505 498 491 484 477
3 489 482 475 468 461
4 345 338 331 324 317

Lodgepole Pine

LP

1

244

237

230

223

216

Ponderosa Pine

PP

1

365

358

351

344

337
2 253 246 239 232 225

Western Redcedar(3)

RC

1

759

752

745

738

731

Western Hemlock and Other Conifer(4)

WH

1

554

547

540

533

526
2 333 326 319 312 305
3 318 311 304 297 290
4 297 290 283 276 269

Red Alder

RA

1

286

279

272

265

258
2 225 218 211 204 197

Black Cottonwood

BC

1

10

3

1

1

1

Other Hardwood

OH

1

154

147

140

133

126

Douglas-Fir Poles

DFL

1

764

757

750

743

736

Western Redcedar Poles

RCL

1

764

757

750

743

736

Chipwood

CHW

1

3

2

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.))


TABLE 1Stumpage Value Table

Stumpage Value Area 1

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$526

$519

$512

$505

$498
2 526 519 512 505 498
3 457 450 443 436 429
4 295 288 281 274 267

Western Redcedar(2)

RC

1

677

670

663

656

649

Western Hemlock and Other Conifer(3)
WH 1 309 302 295 288 281
2 273 266 259 252 245
3 266 259 252 245 238
4 223 216 209 202 195

Red Alder

RA

1

338

331

324

317

310
2 314 307 300 293 286

Black Cottonwood

BC

1

4

1

1

1

1

Other Hardwood

OH

1

192

185

178

171

164

Douglas-Fir Poles

DFL

1

1116

1109

1102

1095

1088

Western Redcedar Poles

RCL

1

1116

1109

1102

1095

1088

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 2Stumpage Value Table

Stumpage Value Area 2

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$595

$588

$581

$574

$567
2 460 453 446 439 432
3 434 427 420 413 406
4 265 258 251 244 237

Western Redcedar(2)

RC

1

677

670

663

656

649

Western Hemlock and Other Conifer (3)

WH

1

313

306

299

292

285
2 278 271 264 257 250
3 277 270 263 256 249
4 256 249 242 235 228

Red Alder

RA

1

338

331

324

317

310
2 314 307 300 293 286

Black Cottonwood

BC

1

4

1

1

1

1

Other Hardwood

OH

1

192

185

178

171

164

Douglas-Fir Poles

DFL

1

1116

1109

1102

1095

1088

Western Redcedar Poles

RCL

1

1116

1109

1102

1095

1088

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 3Stumpage Value Table

Stumpage Value Area 3

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$536

$529

$522

$515

$508
2 421 414 407 400 393
3 356 349 342 335 328
4 224 217 210 203 196

Western Redcedar(3)

RC

1

677

670

663

656

649

Western Hemlock and Other Conifer(4)

WH

1

309

302

295

288

281
2 280 273 266 259 252
3 279 272 265 258 251
4 239 232 225 218 211

Red Alder

RA

1

338

331

324

317

310
2 314 307 300 293 286

Black Cottonwood

BC

1

4

1

1

1

1

Other Hardwood

OH

1

192

185

178

171

164

Douglas-Fir Poles

DFL

1

1116

1109

1102

1095

1088

Western Redcedar Poles

RCL

1

1116

1109

1102

1095

1088

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 4Stumpage Value Table

Stumpage Value Area 4

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$580

$573

$566

$559

$552
2 465 458 451 444 437
3 457 450 443 436 429
4 382 375 368 361 354

Lodgepole Pine

LP

1

224

217

210

203

196

Ponderosa Pine

PP

1

346

339

332

325

318
2 238 231 224 217 210

Western Redcedar(3)

RC

1

677

670

663

656

649

Western Hemlock and Other Conifer(4)

WH

1

309

302

295

288

281
2 293 286 279 272 265
3 277 270 263 256 249
4 250 243 236 229 222

Red Alder

RA

1

338

331

324

317

310
2 314 307 300 293 286

Black Cottonwood

BC

1

4

1

1

1

1

Other Hardwood

OH

1

192

185

178

171

164

Douglas-Fir Poles

DFL

1

1116

1109

1102

1095

1088

Western Redcedar Poles

RCL

1

1116

1109

1102

1095

1088

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 5Stumpage Value Table

Stumpage Value Area 5

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$491

$484

$477

$470

$463
2 468 461 454 447 440
3 457 450 443 436 429
4 355 348 341 334 327

Lodgepole Pine

LP

1

224

217

210

203

196

Ponderosa Pine

PP

1

346

339

332

325

318
2 238 231 224 217 210

Western Redcedar(3)

RC

1

677

670

663

656

649

Western Hemlock and Other Conifer(4)

WH

1

309

302

295

288

281
2 293 286 279 272 265
3 279 272 265 258 251
4 253 246 239 232 225

Red Alder

RA

1

338

331

324

317

310
2 314 307 300 293 286

Black Cottonwood

BC

1

4

1

1

1

1

Other Hardwood

OH

1

192

185

178

171

164

Douglas-Fir Poles

DFL

1

1116

1109

1102

1095

1088

Western Redcedar Poles

RCL

1

1116

1109

1102

1095

1088

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 6Stumpage Value Table

Stumpage Value Area 6

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$301

$294

$287

$280

$273

Lodgepole Pine

LP

1

224

217

210

203

196

Ponderosa Pine

PP

1

346

339

332

325

318
2 238 231 224 217 210

Western Redcedar(3)

RC

1

408

401

394

387

380

True Firs and Spruce(4)

WH

1

245

238

231

224

217

Western White Pine

WP

1

375

368

361

354

347

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

25

24

23

22

21

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle Blocks

RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 7Stumpage Value Table

Stumpage Value Area 7

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$301

$294

$287

$280

$273

Lodgepole Pine

LP

1

239

232

225

218

211

Ponderosa Pine

PP

1

340

333

326

319

312
2 284 277 270 263 256

Western Redcedar(3)

RC

1

408

401

394

387

380

True Firs and Spruce(4)

WH

1

228

221

214

207

200

Western White Pine

WP

1

375

368

361

354

347

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

21

20

19

18

17

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle

Blocks


RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 8Stumpage Value Table

Stumpage Value Area 10

July 1 through December 31, 2001


Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$566

$559

$552

$545

$538
2 451 444 437 430 423
3 443 436 429 422 415
4 368 361 354 347 340

Lodgepole Pine

LP

1

224

217

210

203

196

Ponderosa Pine

PP

1

346

339

332

325

318
2 238 231 224 217 210

Western Redcedar(3)

RC

1

663

656

649

642

635

Western Hemlock and Other Conifer(4)

WH

1

295

288

281

274

267
2 279 272 265 258 251
3 263 256 249 242 235
4 236 229 222 215 208

Red Alder

RA

1

324

317

310

303

296
2 300 293 286 279 272

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

1102

1095

1088

1081

1074

Western Redcedar Poles

RCL

1

1102

1095

1088

1081

1074

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

(3) Harvest value adjustments. The stumpage values in subsection (2) of this rule for the designated stumpage value areas are adjusted for various logging and harvest conditions, subject to the following:

(a) No harvest adjustment is allowed for special forest products, chipwood, or small logs.

(b) Conifer and hardwood stumpage value rates cannot be adjusted below one dollar per MBF.

(c) Except for the timber yarded by helicopter, a single logging condition adjustment applies to the entire harvest unit. The taxpayer must use the logging condition adjustment class that applies to a majority (more than 50%) of the acreage in that harvest unit. If the harvest unit is reported over more than one quarter, all quarterly returns for that harvest unit must report the same logging condition adjustment. The helicopter adjustment applies only to the timber volume from the harvest unit that is yarded from stump to landing by helicopter.

(d) The volume per acre adjustment is a single adjustment class for all quarterly returns reporting a harvest unit. A harvest unit is established by the harvester prior to harvesting. The volume per acre is determined by taking the volume logged from the unit excluding the volume reported as chipwood or small logs and dividing by the total acres logged. Total acres logged does not include leave tree areas (RMZ, UMZ, forested wetlands, etc.,) over 2 acres in size.

(e) A domestic market adjustment applies to timber which meet the following criteria:

(i) Public timber -- Harvest of timber not sold by a competitive bidding process that is prohibited under the authority of state or federal law from foreign export may be eligible for the domestic market adjustment. The adjustment may be applied only to those species of timber that must be processed domestically. According to type of sale, the adjustment may be applied to the following species:

Federal Timber Sales: All species except Alaska-cedar. (Stat. Ref. - 36 C.F.R. 223.10)

State, and Other Nonfederal, Public Timber Sales: Western Redcedar only. (Stat. Ref. - 50 U.S.C. appendix 2406.1)

(ii) Private timber -- Harvest of private timber that is legally restricted from foreign export, under the authority of The Forest Resources Conservation and Shortage Relief Act (Public Law 101-382), (16 U.S.C. Sec. 620 et seq.); the Export Administration Act of 1979 (50 U.S.C. App. 2406(i)); a Cooperative Sustained Yield Unit Agreement made pursuant to the act of March 29, 1944 (16 U.S.C. Sec. 583-583i); or Washington Administrative Code (WAC 240-15-015(2)) is also eligible for the Domestic Market Adjustment.

The following harvest adjustment tables apply from ((January)) July 1 through ((June 30)) December 31, 2001:


TABLE 9Harvest Adjustment Table

Stumpage Value Areas 1, 2, 3, 4, 5, and 10

((January)) July 1 through ((June 30)) December 31, 2001


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of 30 thousand board feet or more per acre. $0.00
Class 2 Harvest of 10 thousand board feet to but not including 30 thousand board feet per acre. - $ 15.00
Class 3 Harvest of less than 10 thousand board feet per acre. - $ 35.00
II. Logging conditions
Class 1 Ground based logging a majority of the unit using tracked or wheeled vehicles or draft animals. $ 0.00
Class 2 Cable logging a majority of the unit using an overhead system of winch driven cables. - $ 30.00
Class 3 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
III. Remote island adjustment:
For timber harvested from a remote island - $50.00
IV. Thinning
Class 1 A limited removal of timber described in WAC 458-40-610(((21))) (28) -$ 100.00

TABLE 10Harvest Adjustment Table

Stumpage Value Areas 6 and 7

((January)) July 1 through ((June 30)) December 31, 2001


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of more than 8 thousand board feet per acre. $0.00
Class 2 Harvest of 3 thousand board feet to 8 thousand board feet per acre. - $7.00
Class 3 Harvest of less than 3 thousand board feet per acre. - $10.00
II. Logging conditions
Class 1 The majority of the harvest unit has less than 40% slope. No significant rock outcrops or swamp barriers. $0.00
Class 2 The majority of the harvest unit has slopes between 40% and 60%. Some rock outcrops or swamp barriers. -$20.00
Class 3 The majority of the harvest unit has rough, broken ground with slopes over 60%. Numerous rock outcrops and bluffs. -$30.00
Class 4 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
Note: A Class 2 adjustment may be used for slopes less than 40% when cable logging is required by a duly promulgated forest practice regulation. Written documentation of this requirement must be provided by the taxpayer to the department of revenue.
III. Remote island adjustment:
For timber harvested from a remote island - $50.00


TABLE 11Domestic Market Adjustment



Class Area Adjustment Applies Dollar Adjustment Per Thousand Board Feet Net Scribner Scale
Class 1: SVA's 1 through 6, and 10 $0.00
Class 2: SVA 7 $0.00

Note: The adjustment will not be allowed on special forest products.

(4) Damaged timber. Timber harvesters planning to remove timber from areas having damaged timber may apply to the department of revenue for an adjustment in stumpage values. The application must contain a map with the legal descriptions of the area, an accurate estimate of the volume of damaged timber to be removed, a description of the damage sustained by the timber with an evaluation of the extent to which the stumpage values have been materially reduced from the values shown in the applicable tables, and a list of estimated additional costs to be incurred resulting from the removal of the damaged timber. The application must be received and approved by the department of revenue before the harvest commences. Upon receipt of an application, the department of revenue will determine the amount of adjustment to be applied against the stumpage values. Timber that has been damaged due to sudden and unforeseen causes may qualify.

(a) Sudden and unforeseen causes of damage that qualify for consideration of an adjustment include:

(i) Causes listed in RCW 84.33.091; fire, blow down, ice storm, flood.

(ii) Others not listed; volcanic activity, earthquake.

(b) Causes that do not qualify for adjustment include:

(i) Animal damage, root rot, mistletoe, prior logging, insect damage, normal decay from fungi, and pathogen caused diseases; and

(ii) Any damage that can be accounted for in the accepted normal scaling rules through volume or grade reductions.

(c) The department of revenue will not grant adjustments for applications involving timber that has already been harvested but will consider any remaining undisturbed damaged timber scheduled for removal if it is properly identified.

(d) The department of revenue will notify the harvester in writing of approval or denial. Instructions will be included for taking any adjustment amounts approved.

[Statutory Authority: RCW 82.32.300, 84.33.096 and 84.33.091. 01-02-020, 458-40-660, filed 12/21/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091, 82.32.060, and 84.33.077. 00-19-067, 458-40-660, filed 9/19/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096 and 84.33.091. 00-14-011, 458-40-660, filed 6/27/00, effective 7/1/00; 00-02-019, 458-40-660, filed 12/27/99, effective 1/1/00; 99-14-055, 458-40-660, filed 6/30/99, effective 7/1/99; 99-02-032, 458-40-660, filed 12/30/98, effective 1/1/99; 98-14-083, 458-40-660, filed 6/30/98, effective 7/1/98; 98-02-015, 458-40-660, filed 12/30/97, effective 1/1/98; 97-14-068, 458-40-660, filed 6/30/97, effective 7/1/97. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.091. 97-02-069, 458-40-660, filed 12/31/96, effective 1/1/97; 96-14-063, 458-40-660, filed 6/28/96, effective 7/1/96; 96-02-057, 458-40-660, filed 12/29/95, effective 1/1/96. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.200. 95-18-027, 458-40-660, filed 8/25/95, effective 9/25/95. Statutory Authority: RCW 82.32.300 and 84.33.096. 95-02-038, 458-40-660, filed 12/30/94, effective 1/1/95. Statutory Authority: RCW 84.33.091, 84.32.300 [82.32.300] and 84.33.096. 94-14-048, 458-40-660, filed 6/30/94, effective 7/1/94; 94-02-047, 458-40-660, filed 12/30/93, effective 1/1/94; 93-14-051, 458-40-660, filed 6/30/93, effective 7/1/93; 93-02-025, 458-40-660, filed 12/31/92, effective 1/1/93; 92-14-083, 458-40-660, filed 6/29/92, effective 7/1/92; 92-02-067, 458-40-660, filed 12/31/91, effective 1/1/92. Statutory Authority: RCW 84.33.096 and 82.32.300. 91-14-077, 458-40-660, filed 6/28/91, effective 7/1/91; 91-09-030, 458-40-660, filed 4/12/91, effective 5/13/91; 91-02-088, 458-40-660, filed 12/31/90, effective 1/31/91; 90-14-033, 458-40-660, filed 6/29/90, effective 7/30/90; 90-02-049, 458-40-660, filed 12/29/89, effective 1/29/90. Statutory Authority: Chapter 84.33 RCW and RCW 84.33.091. 89-14-051 (Order FT-89-2), 458-40-660, filed 6/30/89; 89-02-027 (Order FT-88-5), 458-40-660, filed 12/30/88; 88-14-032 (Order FT-88-2), 458-40-660, filed 6/30/88; 88-02-026 (Order FT-87-5), 458-40-660, filed 12/31/87. Statutory Authority: Chapter 84.33 RCW. 87-14-042 (Order 87-2), 458-40-660, filed 6/30/87; 87-02-023 (Order 86-4), 458-40-660, filed 12/31/86.]

Washington State Code Reviser's Office