WSR 03-14-072

PERMANENT RULES

DEPARTMENT OF REVENUE


[ Filed June 26, 2003, 3:36 p.m. , effective July 1, 2003 ]

     Date of Adoption: June 26, 2003.

     Purpose: WAC 458-40-660 contains the stumpage values used by harvesters of timber to calculate the timber excise tax. This rule is being revised to provide the stumpage values to be used during the second half of 2003.

     Citation of Existing Rules Affected by this Order: Amending WAC 458-40-660 Timber excise tax -- Stumpage value tables.

     Statutory Authority for Adoption: RCW 82.01.060(2), 82.32.300, and 84.33.096.

     Other Authority: RCW 84.33.091.

      Adopted under notice filed as WSR 03-10-079 on May 6, 2003.

     Changes Other than Editing from Proposed to Adopted Version: Based upon testimony at the hearing and further data collected upon the value of small logs for SVA 6 were reduced by one dollar.

     Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0;      Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 1, Repealed 0.

     Other Findings Required by Other Provisions of Law as Precondition to Adoption or Effectiveness of Rule: The stumpage value rule is required by statute (RCW 84.33.091) to be effective on July 1, 2003.
     Effective Date of Rule: July 1, 2003.

June 26, 2003

Alan R. Lynn

Rules Coordinator

Legislation and Policy Division

OTS-6328.3


AMENDATORY SECTION(Amending WSR 03-02-004, filed 12/19/02, effective 1/1/03)

WAC 458-40-660   Timber excise tax--Stumpage value tables -- Stumpage value adjustments.   (1) Introduction. This rule provides stumpage value tables and stumpage value adjustments used to calculate the amount of a harvester's timber excise tax.

     (2) Stumpage value tables. The following stumpage value tables are used to calculate the taxable value of stumpage harvested from ((January)) July 1 through ((June 30)) December 31, 2003:


((TABLE 1—Stumpage Value Table
Stumpage Value Area 1

January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$395
    
$388

$381

$374

$367
2 395 388 381 374 367
3 371 364 357 350 343
4 355 348 341 334 327

Western Redcedar(2)

RC

1

638

631

624

617

610

Western Hemlock and Other Conifer(3)
WH 1 333 326 319 312 305
2 237 230 223 216 209
3 234 227 220 213 206
4 234 227 220 213 206

Red Alder

RA

1

310

303

296

289

282
2 269 262 255 248 241

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

683

676

669

662

655

Western Redcedar Poles

RCL

1

1094

1087

1080

1073

1066

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 2—Stumpage Value Table
Stumpage Value Area 2
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$395

$388

$381

$374

$367
2 389 382 375 368 361
3 378 371 364 357 350
4 367 360 353 346 339

Western Redcedar(2)

RC

1

638

631

624

617

610

Western Hemlock and Other Conifer (3)

WH

1

333

326

319

312

305
2 247 240 233 226 219
3 240 233 226 219 212
4 240 233 226 219 212

Red Alder

RA

1

310

303

296

289

282
2 269 262 255 248 241

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

683

676

669

662

655

Western Redcedar Poles

RCL

1

1094

1087

1080

1073

1066

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 3—Stumpage Value Table
Stumpage Value Area 3
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$395

$388

$381

$374

$367
2 383 376 369 362 355
3 335 328 321 314 307
4 227 220 213 206 199

Western Redcedar(3)

RC

1

638

631

624

617

610

Western Hemlock and Other Conifer(4)

WH

1

333

326

319

312

305
2 264 257 250 243 236
3 248 241 234 227 220
4 221 214 207 200 193

Red Alder

RA

1

310

303

296

289

282
2 269 262 255 248 241

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

683

676

669

662

655

Western Redcedar Poles

RCL

1

1094

1087

1080

1073

1066

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 4—Stumpage Value Table
Stumpage Value Area 4
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$405

$398

$391

$384

$377
2 405 398 391 384 377
3 384 377 370 363 356
4 369 362 355 348 341

Lodgepole Pine

LP

1

167

160

153

146

139

Ponderosa Pine

PP

1

332

325

318

311

304
2 188 181 174 167 160

Western Redcedar(3)

RC

1

638

631

624

617

610

Western Hemlock and Other Conifer(4)

WH

1

333

326

319

312

305
2 275 268 261 254 247
3 253 246 239 232 225
4 242 235 228 221 214

Red Alder

RA

1

310

303

296

289

282
2 269 262 255 248 241

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

683

676

669

662

655

Western Redcedar Poles

RCL

1

1094

1087

1080

1073

1066

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 5—Stumpage Value Table
Stumpage Value Area 5
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$402

$395

$388

$381

$374
2 401 394 387 380 373
3 375 368 361 354 347
4 340 333 326 319 312

Lodgepole Pine

LP

1

167

160

153

146

139

Ponderosa Pine

PP

1

332

325

318

311

304
2 188 181 174 167 160

Western Redcedar(3)

RC

1

638

631

624

617

610

Western Hemlock and Other Conifer(4)

WH

1

333

326

319

312

305
2 239 232 225 218 211
3 239 232 225 218 211
4 239 232 225 218 211

Red Alder

RA

1

310

303

296

289

282
2 269 262 255 248 241

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

178

171

164

157

150

Douglas-Fir Poles

DFL

1

683

676

669

662

655

Western Redcedar Poles

RCL

1

1094

1087

1080

1073

1066

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 6—Stumpage Value Table
Stumpage Value Area 6
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$280

$273

$266

$259

$252

Lodgepole Pine

LP

1

167

160

153

146

139

Ponderosa Pine

PP

1

332

325

318

311

304
2 188 181 174 167 160

Western Redcedar(3)

RC

1

505

498

491

484

477

True Firs and Spruce(4)

WH

1

159

152

145

138

131

Western White Pine

WP

1

420

413

406

399

392

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

25

24

23

22

21

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle Blocks

RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 7—Stumpage Value Table
Stumpage Value Area 7
January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$301

$294

$287

$280

$273

Lodgepole Pine

LP

1

245

238

231

224

217

Ponderosa Pine

PP

1

369

362

355

348

341
2 298 291 284 277 270

Western Redcedar(3)

RC

1

505

498

491

484

477

True Firs and Spruce(4)

WH

1

238

231

224

217

210

Western White Pine

WP

1

420

413

406

399

392

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

516

509

502

495

488

Small Logs

SML

1

19

18

17

16

15

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle

Blocks


RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 8—Stumpage Value Table
Stumpage Value Area 10

January 1 through June 30, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$391

$384

$377

$370

$363
2 391 384 377 370 363
3 370 363 356 349 342
4 355 348 341 334 327

Lodgepole Pine

LP

1

167

160

153

146

139

Ponderosa Pine

PP

1

332

325

318

311

304
2 188 181 174 167 160

Western Redcedar(3)

RC

1

624

617

610

603

596

Western Hemlock and Other Conifer(4)

WH

1

319

312

305

298

291
2 261 254 247 240 233
3 239 232 225 218 211
4 228 221 214 207 200

Red Alder

RA

1

296

289

282

275

268
2 255 248 241 234 227

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

164

157

150

143

136

Douglas-Fir Poles

DFL

1

669

662

655

648

641

Western Redcedar Poles

RCL

1

1080

1073

1066

1059

1052

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.))


TABLE 1—Stumpage Value Table
Stumpage Value Area 1

July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$421
    
$414

$407

$400

$393
2 374 367 360 353 346
3 362 355 348 341 334
4 358 351 344 337 330

Western Redcedar(2)

RC

1

814

807

800

793

786

Western Hemlock and Other Conifer(3)
WH 1 330 323 316 309 302
2 236 229 222 215 208
3 233 226 219 212 205
4 231 224 217 210 203

Red Alder

RA

1

333

326

319

312

305
2 284 277 270 263 256

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles

DFL

1

676

669

662

655

648

Western Redcedar Poles

RCL

1

1079

1072

1065

1058

1051

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 2—Stumpage Value Table
Stumpage Value Area 2
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir

DF

1

$384

$377

$370

$363

$356
2 379 372 365 358 351
3 377 370 363 356 349
4 285 278 271 264 257

Western Redcedar(2)

RC

1

814

807

800

793

786

Western Hemlock and Other Conifer (3)

WH

1

330

323

316

309

302
2 250 243 236 229 222
3 229 222 215 208 201
4 226 219 212 205 198

Red Alder

RA

1

333

326

319

312

305
2 284 277 270 263 256

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles

DFL

1

676

669

662

655

648

Western Redcedar Poles

RCL

1

1079

1072

1065

1058

1051

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(4)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(5)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(5)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Alaska-Cedar.
(3) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(4) Stumpage value per 8 lineal feet or portion thereof.
(5) Stumpage value per lineal foot.

TABLE 3—Stumpage Value Table
Stumpage Value Area 3
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber

Quality

Code

Number


Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$349

$342

$335

$328

$321
2 323 316 309 302 295
3 308 301 294 287 280
4 308 301 294 287 280

Western Redcedar(3)

RC

1

814

807

800

793

786

Western Hemlock and Other Conifer(4)

WH

1

330

323

316

309

302
2 247 240 233 226 219
3 217 210 203 196 189
4 185 178 171 164 157

Red Alder

RA

1

333

326

319

312

305
2 284 277 270 263 256

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles

DFL

1

676

669

662

655

648

Western Redcedar Poles

RCL

1

1079

1072

1065

1058

1051

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 4—Stumpage Value Table
Stumpage Value Area 4
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$384

$377

$370

$363

$356
2 380 373 366 359 352
3 377 370 363 356 349
4 366 359 352 345 338

Lodgepole Pine

LP

1

160

153

146

139

132

Ponderosa Pine

PP

1

310

303

296

289

282
2 213 206 199 192 185

Western Redcedar(3)

RC

1

814

807

800

793

786

Western Hemlock and Other Conifer(4)

WH

1

330

323

316

309

302
2 242 235 228 221 214
3 233 226 219 212 205
4 209 202 195 188 181

Red Alder

RA

1

333

326

319

312

305
2 284 277 270 263 256

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles

DFL

1

676

669

662

655

648

Western Redcedar Poles

RCL

1

1079

1072

1065

1058

1051

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 5—Stumpage Value Table
Stumpage Value Area 5
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$479

$472

$465

$458

$451
2 395 388 381 374 367
3 377 370 363 356 349
4 348 341 334 327 320

Lodgepole Pine

LP

1

160

153

146

139

132

Ponderosa Pine

PP

1

310

303

296

289

282
2 213 206 199 192 185

Western Redcedar(3)

RC

1

814

807

800

793

786

Western Hemlock and Other Conifer(4)

WH

1

330

323

316

309

302
2 210 203 196 189 182
3 210 203 196 189 182
4 210 203 196 189 182

Red Alder

RA

1

333

326

319

312

305
2 284 277 270 263 256

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

182

175

168

161

154

Douglas-Fir Poles

DFL

1

676

669

662

655

648

Western Redcedar Poles

RCL

1

1079

1072

1065

1058

1051

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

TABLE 6—Stumpage Value Table
Stumpage Value Area 6
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$272

$265

$258

$251

$244

Lodgepole Pine

LP

1

160

153

146

139

132

Ponderosa Pine

PP

1

310

303

296

289

282
2 213 206 199 192 185

Western Redcedar(3)

RC

1

530

523

516

509

502

True Firs and Spruce(4)

WH

1

150

143

136

129

122

Western White Pine

WP

1

370

363

356

349

342

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

530

523

516

509

502

Small Logs

SML

1

28

27

26

25

24

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle Blocks

RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 7—Stumpage Value Table
Stumpage Value Area 7
July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$277

$270

$263

$256

$249

Lodgepole Pine

LP

1

209

202

195

188

181

Ponderosa Pine

PP

1

333

326

319

312

305
2 261 254 247 240 233

Western Redcedar(3)

RC

1

530

523

516

509

502

True Firs and Spruce(4)

WH

1

212

205

198

191

184

Western White Pine

WP

1

370

363

356

349

342

Hardwoods

OH

1

50

43

36

29

22

Western Redcedar Poles

RCL

1

530

523

516

509

502

Small Logs

SML

1

19

18

17

16

15

Chipwood

CHW

1

1

1

1

1

1

RC Shake & Shingle

Blocks


RCF


1


92


85


78


71


64


LP & Other Posts(5)

LPP

1

0.35

0.35

0.35

0.35

0.35

Pine Christmas Trees(6)

PX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(7)

DFX

1

0.25

0.25

0.25

0.25

0.25

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot. Includes Ponderosa Pine, Western White Pine, and Lodgepole Pine.
(7) Stumpage value per lineal foot.

TABLE 8—Stumpage Value Table
Stumpage Value Area 10

July 1 through December 31, 2003

Stumpage Values per Thousand Board Feet Net Scribner Log Scale(1)


Species

Name


Species

Code


Timber Quality Code Number

Hauling

Distance Zone Number

1

2

3

4

5


Douglas-Fir(2)

DF

1

$370

$363

$356

$349

$342
2 366 359 352 345 338
3 363 356 349 342 335
4 352 345 338 331 324

Lodgepole Pine

LP

1

160

153

146

139

132

Ponderosa Pine

PP

1

310

303

296

289

282
2 213 206 199 192 185

Western Redcedar(3)

RC

1

800

793

786

779

772

Western Hemlock and Other Conifer(4)

WH

1

316

309

302

295

288
2 228 221 214 207 200
3 219 212 205 198 191
4 195 188 181 174 167

Red Alder

RA

1

319

312

305

298

291
2 270 263 256 249 242

Black Cottonwood

BC

1

1

1

1

1

1

Other Hardwood

OH

1

168

161

154

147

140

Douglas-Fir Poles

DFL

1

662

655

648

641

634

Western Redcedar Poles

RCL

1

1065

1058

1051

1044

1037

Chipwood

CHW

1

1

1

1

1

1

RC Shake Blocks

RCS

1

303

296

289

282

275

RC Shingle Blocks

RCF

1

121

114

107

100

93

RC & Other Posts(5)

RCP

1

0.45

0.45

0.45

0.45

0.45

DF Christmas Trees(6)

DFX

1

0.25

0.25

0.25

0.25

0.25

Other Christmas Trees(6)

TFX

1

0.50

0.50

0.50

0.50

0.50

(1) Log scale conversions Western and Eastern Washington. See conversion methods WAC 458-40-680.
(2) Includes Western Larch.
(3) Includes Alaska-Cedar.
(4) Includes Western Hemlock, Mountain Hemlock, Pacific Silver Fir, Noble Fir, Grand Fir, Subalpine Fir, and all Spruce. Pacific Silver Fir, Noble Fir, Grand Fir, and Subalpine Fir are all commonly referred to as "White Fir."
(5) Stumpage value per 8 lineal feet or portion thereof.
(6) Stumpage value per lineal foot.

     (3) Harvest value adjustments. The stumpage values in subsection (2) of this rule for the designated stumpage value areas are adjusted for various logging and harvest conditions, subject to the following:

     (a) No harvest adjustment is allowed for special forest products, chipwood, or small logs.

     (b) Conifer and hardwood stumpage value rates cannot be adjusted below one dollar per MBF.

     (c) Except for the timber yarded by helicopter, a single logging condition adjustment applies to the entire harvest unit. The taxpayer must use the logging condition adjustment class that applies to a majority (more than 50%) of the acreage in that harvest unit. If the harvest unit is reported over more than one quarter, all quarterly returns for that harvest unit must report the same logging condition adjustment. The helicopter adjustment applies only to the timber volume from the harvest unit that is yarded from stump to landing by helicopter.

     (d) The volume per acre adjustment is a single adjustment class for all quarterly returns reporting a harvest unit. A harvest unit is established by the harvester prior to harvesting. The volume per acre is determined by taking the volume logged from the unit excluding the volume reported as chipwood or small logs and dividing by the total acres logged. Total acres logged does not include leave tree areas (RMZ, UMZ, forested wetlands, etc.,) over 2 acres in size.

     (e) A domestic market adjustment applies to timber which meet the following criteria:

     (i) Public timber -- Harvest of timber not sold by a competitive bidding process that is prohibited under the authority of state or federal law from foreign export may be eligible for the domestic market adjustment. The adjustment may be applied only to those species of timber that must be processed domestically. According to type of sale, the adjustment may be applied to the following species:

     Federal Timber Sales: All species except Alaska-cedar. (Stat. Ref. - 36 C.F.R. 223.10)

     State, and Other Nonfederal, Public Timber Sales: Western Redcedar only. (Stat. Ref. - 50 U.S.C. appendix 2406.1)

     (ii) Private timber -- Harvest of private timber that is legally restricted from foreign export, under the authority of The Forest Resources Conservation and Shortage Relief Act (Public Law 101-382), (16 U.S.C. Sec. 620 et seq.); the Export Administration Act of 1979 (50 U.S.C. App. 2406(i)); a Cooperative Sustained Yield Unit Agreement made pursuant to the act of March 29, 1944 (16 U.S.C. Sec. 583-583i); or Washington Administrative Code (WAC 240-15-015(2)) is also eligible for the Domestic Market Adjustment.

     The following harvest adjustment tables apply from July 1 through December 31, ((2002)) 2003:


TABLE 9—Harvest Adjustment Table
Stumpage Value Areas 1, 2, 3, 4, 5, and 10

((January)) July 1 through ((June 30)) December 31, 2003


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of 30 thousand board feet or more per acre. $0.00
Class 2 Harvest of 10 thousand board feet to but not including 30 thousand board feet per acre. - $15.00
Class 3 Harvest of less than 10 thousand board feet per acre. - $35.00
II. Logging conditions
Class 1 Ground based logging a majority of the unit using tracked or wheeled vehicles or draft animals. $0.00
Class 2 Cable logging a majority of the unit using an overhead system of winch driven cables. - $30.00
Class 3 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
III. Remote island adjustment:
For timber harvested from a remote island - $50.00
IV. Thinning
Class 1 A limited removal of timber described in WAC 458-40-610 (28) -$100.00

TABLE 10—Harvest Adjustment Table
Stumpage Value Areas 6 and 7
((January)) July 1 through ((June 30)) December 31, 2003


Type of

Adjustment

Definition

Dollar Adjustment Per

Thousand Board Feet

Net Scribner Scale

I. Volume per acre
Class 1 Harvest of more than 8 thousand board feet per acre. $0.00
Class 2 Harvest of 3 thousand board feet to 8 thousand board feet per acre. - $7.00
Class 3 Harvest of less than 3 thousand board feet per acre. - $10.00
II. Logging conditions
Class 1 The majority of the harvest unit has less than 40% slope. No significant rock outcrops or swamp barriers. $0.00
Class 2 The majority of the harvest unit has slopes between 40% and 60%. Some rock outcrops or swamp barriers. -$20.00
Class 3 The majority of the harvest unit has rough, broken ground with slopes over 60%. Numerous rock outcrops and bluffs. -$30.00
Class 4 Applies to logs yarded from stump to landing by helicopter. This does not apply to special forest products. - $145.00
Note: A Class 2 adjustment may be used for slopes less than 40% when cable logging is required by a duly promulgated forest practice regulation. Written documentation of this requirement must be provided by the taxpayer to the department of revenue.
III. Remote island adjustment:
For timber harvested from a remote island - $50.00


TABLE 11—Domestic Market Adjustment


Class Area Adjustment Applies Dollar Adjustment Per Thousand Board Feet Net Scribner Scale
Class 1: SVA's 1 through 6, and 10 $0.00
Class 2: SVA 7 $0.00

Note: The adjustment will not be allowed on special forest products.

     (4) Damaged timber. Timber harvesters planning to remove timber from areas having damaged timber may apply to the department of revenue for an adjustment in stumpage values. The application must contain a map with the legal descriptions of the area, an accurate estimate of the volume of damaged timber to be removed, a description of the damage sustained by the timber with an evaluation of the extent to which the stumpage values have been materially reduced from the values shown in the applicable tables, and a list of estimated additional costs to be incurred resulting from the removal of the damaged timber. The application must be received and approved by the department of revenue before the harvest commences. Upon receipt of an application, the department of revenue will determine the amount of adjustment to be applied against the stumpage values. Timber that has been damaged due to sudden and unforeseen causes may qualify.

     (a) Sudden and unforeseen causes of damage that qualify for consideration of an adjustment include:

     (i) Causes listed in RCW 84.33.091; fire, blow down, ice storm, flood.

     (ii) Others not listed; volcanic activity, earthquake.

     (b) Causes that do not qualify for adjustment include:

     (i) Animal damage, root rot, mistletoe, prior logging, insect damage, normal decay from fungi, and pathogen caused diseases; and

     (ii) Any damage that can be accounted for in the accepted normal scaling rules through volume or grade reductions.

     (c) The department of revenue will not grant adjustments for applications involving timber that has already been harvested but will consider any remaining undisturbed damaged timber scheduled for removal if it is properly identified.

     (d) The department of revenue will notify the harvester in writing of approval or denial. Instructions will be included for taking any adjustment amounts approved.

[Statutory Authority: RCW 82.01.060(2), 82.32.300, 84.33.096, 84.33.091, and 84.33.140. 03-02-004, § 458-40-660, filed 12/19/02, effective 1/1/03. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 02-14-019, § 458-40-660, filed 6/21/02, effective 7/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091 and 84.33.120. 02-02-033, § 458-40-660, filed 12/24/01, effective 1/1/02. Statutory Authority: RCW 82.32.300, 84.33.096, and 84.33.091. 01-13-105, § 458-40-660, filed 6/20/01, effective 7/1/01; 01-02-020, § 458-40-660, filed 12/21/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096, 84.33.091, 82.32.060, and 84.33.077. 00-19-067, § 458-40-660, filed 9/19/00, effective 1/1/01. Statutory Authority: RCW 82.32.300, 84.33.096 and 84.33.091. 00-14-011, § 458-40-660, filed 6/27/00, effective 7/1/00; 00-02-019, § 458-40-660, filed 12/27/99, effective 1/1/00; 99-14-055, § 458-40-660, filed 6/30/99, effective 7/1/99; 99-02-032, § 458-40-660, filed 12/30/98, effective 1/1/99; 98-14-083, § 458-40-660, filed 6/30/98, effective 7/1/98; 98-02-015, § 458-40-660, filed 12/30/97, effective 1/1/98; 97-14-068, § 458-40-660, filed 6/30/97, effective 7/1/97. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.091. 97-02-069, § 458-40-660, filed 12/31/96, effective 1/1/97; 96-14-063, § 458-40-660, filed 6/28/96, effective 7/1/96; 96-02-057, § 458-40-660, filed 12/29/95, effective 1/1/96. Statutory Authority: RCW 82.32.330, 84.33.096 and 84.33.200. 95-18-027, § 458-40-660, filed 8/25/95, effective 9/25/95. Statutory Authority: RCW 82.32.300 and 84.33.096. 95-02-038, § 458-40-660, filed 12/30/94, effective 1/1/95. Statutory Authority: RCW 84.33.091, 84.32.300 [82.32.300] and 84.33.096. 94-14-048, § 458-40-660, filed 6/30/94, effective 7/1/94; 94-02-047, § 458-40-660, filed 12/30/93, effective 1/1/94; 93-14-051, § 458-40-660, filed 6/30/93, effective 7/1/93; 93-02-025, § 458-40-660, filed 12/31/92, effective 1/1/93; 92-14-083, § 458-40-660, filed 6/29/92, effective 7/1/92; 92-02-067, § 458-40-660, filed 12/31/91, effective 1/1/92. Statutory Authority: RCW 84.33.096 and 82.32.300. 91-14-077, § 458-40-660, filed 6/28/91, effective 7/1/91; 91-09-030, § 458-40-660, filed 4/12/91, effective 5/13/91; 91-02-088, § 458-40-660, filed 12/31/90, effective 1/31/91; 90-14-033, § 458-40-660, filed 6/29/90, effective 7/30/90; 90-02-049, § 458-40-660, filed 12/29/89, effective 1/29/90. Statutory Authority: Chapter 84.33 RCW and RCW 84.33.091. 89-14-051 (Order FT-89-2), § 458-40-660, filed 6/30/89; 89-02-027 (Order FT-88-5), § 458-40-660, filed 12/30/88; 88-14-032 (Order FT-88-2), § 458-40-660, filed 6/30/88; 88-02-026 (Order FT-87-5), § 458-40-660, filed 12/31/87. Statutory Authority: Chapter 84.33 RCW. 87-14-042 (Order 87-2), § 458-40-660, filed 6/30/87; 87-02-023 (Order 86-4), § 458-40-660, filed 12/31/86.]

Legislature Code Reviser 

Register

© Washington State Code Reviser's Office