Effective Date of Rule: Thirty-one days after filing.

     Purpose: Classification 4601 was one of the original classifications developed in 1911 when explosives production was much different than it is now. With the development of more stable products, better methods, and safety regulation[s] by numerous state and federal agencies, a review was warranted. Classification services conducted a study of the explosives industry in Washington state. Classification 4601, used for explosives ammunition and fireworks manufacturing, is assigned to only seven employers, in three subcodes. The results of the study support the need for rule changes. This rule making will put explosive dealers into a classification more closely aligned with the nature of their work, and reassign the few businesses remaining in class 4601 to other classifications that are a better fit for their operations.

     Citation of Existing Rules Affected by this Order: Repealing WAC 296-17A-4601; and amending WAC 296-17A-2106, 296-17A-3402, and 296-17A-3701.

     Statutory Authority for Adoption: RCW 51.16.035, 51.16.100, 51.04.020(1).

      Adopted under notice filed as WSR 10-20-133 on October 5, 2010.

     Number of Sections Adopted in Order to Comply with Federal Statute: New 0, Amended 0, Repealed 0; Federal Rules or Standards: New 0, Amended 0, Repealed 0; or Recently Enacted State Statutes: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted at Request of a Nongovernmental Entity: New 0, Amended 0, Repealed 0.

     Number of Sections Adopted on the Agency's Own Initiative: New 0, Amended 3, Repealed 1.

     Number of Sections Adopted in Order to Clarify, Streamline, or Reform Agency Procedures: New 0, Amended 3, Repealed 1.

     Number of Sections Adopted Using Negotiated Rule Making: New 0, Amended 0, Repealed 0;      Pilot Rule Making: New 0, Amended 0, Repealed 0; or Other Alternative Rule Making: New 0, Amended 3, Repealed 1.

     Date Adopted: December 1, 2010.

Judy Schurke

Director

OTS-3663.1

AMENDATORY SECTION(Amending WSR 07-01-014, filed 12/8/06, effective 12/8/06)

WAC 296-17A-2106   Classification 2106.  

2106-00 Fertilizer, anhydrous ammonia and agricultural chemical dealers

     Applies to establishments engaged in the sale of fertilizer, anhydrous ammonia, and agricultural chemicals. This classification includes the mixing of wet or dry chemical fertilizers all of which fall into one of three categories: Nitrogen, phosphate or potassium. Fertilizer dealers may use a chemical or mechanical process to mix one or more of the basic fertilizers or combine portions of each per customer specifications. Included in this classification is the manufacture, distribution, and application of anhydrous ammonia which is dry ammonia gas compressed into a liquid and used as a fertilizer. Also included in this classification are establishments that sell and distribute "natural" fertilizers (manure). Typical establishments in this classification include, but are not limited to, commercial fertilizer dealers, farmer co-ops, and grange supply dealers which may do some chemical mixing but are more predominately involved in the sales and delivery of the fertilizer.

     This classification excludes the mining of raw ores (phosphate and potassium) used in manufacturing the fertilizer which is to be reported separately in classification 1701; the manufacture of ammonia and nitric acid which is to be reported separately in classification 3701; and the application of fertilizer by a custom farm services contractor which is to be reported separately in classification 4808.

2106-01 Explosive powder and chemical dealers

     Applies to establishments engaged in the sale of explosive powders and chemicals, including the incidental mixing, blending, packaging, and bulk delivery and/or blending at the customer's site and in the sale of blasting supplies. Products include, but are not limited to, dry, liquid and gel explosives, fuses and detonators.

     This classification excludes the mining of raw ores or the manufacture of chemicals used in manufacturing explosives which are to be reported separately in 1701 and 3701 respectively, the manufacture of explosive devices which is to be reported separately in the applicable manufacturing classification, and contract blasting such as at a quarry or construction site which is to be reported separately in classification 0103.

[07-01-014, recodified as § 296-17A-2106, filed 12/8/06, effective 12/8/06. Statutory Authority: RCW 51.16.035. 98-18-042, § 296-17-56402, filed 8/28/98, effective 10/1/98; 96-12-039, § 296-17-56402, filed 5/31/96, effective 7/1/96; 88-12-050 (Order 88-06), § 296-17-56402, filed 5/31/88, effective 7/1/88.]

3402-00 Air compressor: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of air compressors. This includes air or gas compressors used for paint sprayers, air tools, tire inflation, and general industrial purposes. Operations contemplated include, but are not limited to, welding, machining, general mechanical and electrical work. Machinery and equipment includes, but is not limited to, hand and air tools, welders, punches, shears, and compression equipment. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-01 Printing or bookbinding machinery: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of printing or bookbinding machinery. The outside casings of the machines may be made of plate metal that varies between 1" to 2 1/2" in thickness. The machines used to make the presses and binding machinery may include both Computer Numeric Controlled (CNC) and manual mills and lathes. Other machinery used in the manufacturing process includes, but is not limited to, welders or cutters, grinders, and drill presses. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; and the set up, installation and repair of printing or bookbinding machinery which is to be reported separately in classification 0603.

3402-02 Pump, safe, scale, auto jack, and water meter: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of pumps, safes, scales, auto jacks, and water meters. Materials range from brass screws and rubber washers used to rebuild water meters to plate metal and steel castings used for safe and pump manufacturing. Machinery includes, but is not limited to, hand tools used for repairs, lathes, welders, and pressure testers. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; the installation and repair of safes which is to be reported separately in classification 0607; and the installation of pumps which is to be reported separately in the applicable classification.

3402-03 Shoe or textile machinery: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of shoe machinery or textile machinery. Metal materials used vary in size, shape and dimension. Machinery includes, but is not limited to, drills, mills, lathes, saws, and welders. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and the installation and repair of shoe or textile machinery which is to be reported separately in classification 0603.

3402-04 Confectioners or food processing machinery: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of food processing or confectioners machinery. Metal materials used vary in size, shape and weight. These establishments often have an assembly line operation and a separate electronic assembly area. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and the installation and repair of confectioners and food processing machinery which is to be reported separately in classification 0603.

3402-05 Machine shops, N.O.C.

     Applies to establishments engaged in general machine shop operations not covered by another classification (N.O.C.), tool sharpening, and mobile welding shops. Many of the establishments in this classification are "job shops." Size and shape of materials vary with steel and aluminum being the most common. Plastics, light weight aluminum, and alloyed metals are becoming increasingly popular in the manufacture of equipment for some industries. These establishments often have welding shops along with machine shops. Machinery and equipment includes, but is not limited to, mills, lathes, grinders, saws, welding equipment, inspection equipment, and material handling equipment. Machinery is both manual and Computer Numeric Controlled (CNC). This classification also includes "mobile shops" which are used exclusively to repair machinery or equipment. A "mobile shop" in this classification usually means a van or pick up pulling a utility trailer equipped with hand tools, specialty tools, air tools, a compressor, and a portable welding unit. The machinery or equipment is usually repaired at the customer's location, however, sometimes the broken part is removed and taken back to the shop for repair.

     This classification excludes repairs to buildings and structures which are to be reported separately in the appropriate construction classification, and mechanical repairs which are to be reported separately in the classification applicable to the work being performed.

     Special note: The term "job shop" is an industry term that means the shop will produce products to customer specifications.

3402-06 Power saw, lawn and garden equipment, small motor, N.O.C.: Repair

     Applies to establishments engaged in repairing small power tools, small motors powered by gas or diesel, outboard marine engines, and lawn and garden equipment not covered by another classification (N.O.C.). The largest piece of equipment repaired in this classification is generally a riding lawn mower. Classification 3402-06 is assigned in conjunction with a store classification for establishments that have a store operation and also repair the type of items they sell. Classification 3402-06 may also be assigned to a manufacturers representative who performs warranty repairs. Tools used in this type of repair are mainly hand and air tools. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and the repair of electrical motors which is to be reported separately in classification 5201.

3402-07 Gear: Manufacturing or grinding

     Applies to establishments engaged in the manufacture or grinding of gears. Establishments in this classification may also cut key slots and broaches. Establishments that cut stock to manufacture the gear are often not the same ones that perform the final grinding process. Gears may go through two, three, or four different grinding, slotting, and/or keying establishments and then go to another establishment for electroplating or galvanizing before they are ready for sale or use. Precision machine shops may grind gears to the ten thousandths of an inch. Materials used are usually stainless steel, aluminum, or plastic. Machinery includes, but is not limited to, gear shapers, drill presses, mill, hobbers, grinders, some of which might be Computer Numeric Controlled (CNC). This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-08 Elevator: Manufacturing

     Applies to establishments engaged in the manufacture of elevators and associated electronic components. Machinery includes, but is not limited to, mills, drills, lathes, saws, and grinders. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and the installation, service, and repair of elevators which is to be reported separately in classification 0602.

3402-12 Multimedia blasting

     Applies to establishments engaged in multimedia (such as, but not limited to, glass, plastic and sand) blasting operations which strip paint or other coatings from metal or fiberglass. Most of the blasting operations in this classification are done on automobiles, but it also applies to establishments that perform blasting on items such as, but not limited to, barbecue grills, and cast iron pieces. Multimedia blasting processes in this classification are performed in a shop, use less air pressure and media with softer finishes than other blasting operations. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and sandblasting of buildings or structures which is to be reported separately in classification 0504.

3402-14 Furnace, heater, radiator, wood, propane, or pellet stoves: Manufacturing

     Applies to establishments engaged in the manufacture of furnaces, radiators, wood, propane, or pellet burning stoves or similar heating fixtures. Materials include, but are not limited to, metal cast parts, sheet metal, plate metal, aluminum, or stainless steel. Machinery includes, but is not limited to, hand tools, solder guns, punches, lathes, and saws. Establishments in this classification may have separate areas for electronic assembly and/or painting. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; establishments engaged in the manufacture of radiators for automobiles or trucks which are to be reported separately in classification 3402-48; and establishments engaged in the manufacture of baseboard heaters which are to be reported separately in classification 3404.

3402-16 Die casting

     Applies to establishments engaged in the manufacture of products by die casting. Die casting is a manufacturing process for producing accurately-dimensioned, sharply-defined metal products which are referred to as "die castings." "Dies" are the steel molds used to mass produce the product. The process begins when ingots of various metal alloys are melted in die casting machines. The machine forces the metal into the die under hydraulic or pneumatic pressure. The casting quickly solidifies in the die, and is automatically ejected by the machine, and the cycle starts again. The castings are cleaned by grinding or sanding, which also removes any excess metal "flash." Many die casting manufacturers maintain their own machine shop for making the dies. Die making, when done as a part of die casting operations, is included within the scope of this classification. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; and establishments engaged in making dies for others which are to be reported separately in classification 3402-74.

3402-26 Saw blade: Manufacturing, assembly, or sharpening

     Applies to establishments engaged in the manufacture, assembly, or sharpening of saw blades such as, but not limited to, those used in circular saws, band saws, ripsaws, keyhole saws, and handsaws such as hacksaws or meat saws. This classification also includes sharpening services for items such as, but not limited to, tools, scissors, and knives. Materials include, but are not limited to, high tensile steel and carbide tipped blades. Machinery includes, but is not limited to, saws, mills, drills, and hand tools. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; establishments engaged in the repair or sharpening of chain saws which are to be reported separately in classification 3402-06; and establishments engaged in the manufacture or repair of electrical saws which are to be reported separately in classification 5201.

3402-28 Heat treating metal

     Applies to establishments engaged in heat treating metal. The heat treating process may use computer numeric controlled ovens or furnaces. The oven may heat up to 1200 degrees Fahrenheit and a furnace may heat up to 2000 degrees Fahrenheit. The metal(s) is placed on a platform; the platform is hydraulically moved into the first chamber and the door is automatically closed. At this time, the oxygen is burned from the chamber. Then the second chamber door is opened and the metal enters the oven/furnace. Depending upon the specifications, the heat treating process usually takes six to sixteen hours. When the metal is finished in the heating chamber it returns automatically to the first chamber. Then the platform lowers and the metals are dipped into a cooling agent. Once the metals are cooled to room temperature the platform rises, the door opens, and the materials are removed. The process is essentially the same using noncomputer numeric controlled heat treating equipment except that, rather than being hydraulically operated, the machine operators move the metals through the system. Many establishments do not produce a product, but heat treat a variety of products to customer specifications. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-29 Nut, bolt, screw, nail, tack, rivet, eyelet spike, needle, N.O.C.: Manufacturing

Sprinkler head, speedometer, carburetor: Manufacturing or assembly

     Applies to establishments engaged in the manufacture of nuts, bolts, screws, nails, tacks, rivets, eyelets, spikes, and needles not covered by another classification (N.O.C.). This classification also applies to establishments engaged in the manufacture or assembly of sprinkler heads, speedometers, or carburetors. Materials include, but are not limited to, steel or iron rods which may be pressed or formed, and small component parts. Machinery includes, but is not limited to, saws, shears, presses, chuckers, threading and tapping machines, some of which may be Computer Numeric Controlled (CNC). Establishments may have separate areas for deburring, inspecting, packing and shipping. The carburetor rebuilding may be performed on vehicles that are driven or towed into the shop, or on carburetors that have been already removed from the vehicles. In either case the repairs are made exclusively with hand and air tools and sometimes a diagnostic scope and a drill press. A speedometer is usually embodied with a mileage recording mechanism. The central feature of the device is a permanent magnet. There are gears, spindles, and a drive shaft present in most speedometers. There is also a unit counting disc and a spiral spring calibrator. Hand tools are used almost exclusively in the repair of this kind of speedometer. Today many speedometers are computer controlled. Basically, if this kind of speedometer is in need of repair, a computer chip(s) is replaced, using hand tools. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in the manufacture of hardware that is not covered under another classification, such as handles, latches, and hinges which are to be reported separately in classification 3404, and the repair of speedometers or carburetors in a vehicle which is to be reported separately in the appropriate vehicle repair classification.

3402-32 Abrasive wheel: Manufacturing

     Applies to establishments engaged in the manufacture of abrasive wheels. Manufacturing operations often include a laboratory where carbon and other materials are mixed together to form the abrasive edge of the mainly high tensile steel wheels. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-40 Welding or cutting, N.O.C. (mobile operations limited to repair of equipment and machinery)

     Applies to establishments engaged in welding or cutting operations not covered by another classification (N.O.C.) either in the shop or at the customer's site. Steel is the predominant material along with some aluminum alloys. Machinery is predominantly welding equipment, but may include tools such as, but not limited to, grinders, saws, drills, and material handling equipment. This classification also includes "mobile shops" which are used exclusively to repair machinery or equipment. A "mobile shop" in this classification usually means a van or pick up pulling a utility trailer equipped with hand tools, specialty tools, air tools, a compressor, and a portable welding unit. The machinery or equipment is usually repaired at the customer's location, sometimes with the use of the customer's equipment; however, broken parts may be removed and taken back to the shop for repair.

     This classification excludes welding construction and repairs to buildings or structures which are to be reported separately in the appropriate construction classification and mechanical repairs which are to be reported separately in the classification applicable to the work being performed.

3402-48 Automobile or truck, radiator and heater core: Manufacturing and repair shops

     Applies to establishments engaged in the manufacture and/or repair of automobile or truck radiator and heater cores. Manufacturers in this classification may have a die casting area and a separate electronic assembly area. Tools and equipment include, but are not limited to, hand tools, solder guns, and punches. Shops that repair radiators may work on the radiators in the vehicles, but usually the radiators have been removed from the vehicle. The radiator is examined and the core may be removed. Next the radiator is cleaned, air pressurized, and dipped in a water tank to check it for leaks. Once the leaks are found they can generally be repaired by welding the holes shut. The radiator is dipped again to ensure the repair has been made properly. Cleaning the radiator may be done by sandblasting, ultra sound baths or by "rodding" the radiator to remove corrosion. Repair equipment includes, but is not limited to, welders, air and hand tools, dipping tanks, hoists, and forklifts. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-60 Office machinery, N.O.C.: Manufacturing or assembly; Cash register or sewing machines: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of cash registers, sewing machines and office machinery not covered by another classification (N.O.C.) such as, but not limited to, copiers, collators, mail/postage machines, calculators and automatic letter openers. Component parts may be metal, plastic, or wood. Operations include, but are not limited to, cutting, shaping, forming, drilling, riveting, clamping, and bolting; there may be a separate electronic assembly area. Machinery and tools vary within this classification; some establishments use hand and air tools only, others use additional equipment such as, but not limited to, saws, lathes, mills, drills, or water jets, some of which may be Computer Numeric Controlled (CNC). This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-61 Small arms and ammunition: Manufacturing, assembly, or rebuild

     Applies to establishments engaged in the manufacture, assembly, or rebuild of small arms, the manufacture of ammunition and reloading. For the purpose of this classification, small arms means .50 caliber or less, such as pistols, rifles, shotguns, and light machine guns. Operations include, but are not limited to, metal stamping of casings, machining, assembling, and a high proportion of inspecting. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; ((establishments engaged in the manufacture of ammunition which is to be reported separately in classification 4601;)) the manufacture or repair of heavy arms which is to be reported separately in classification 5109; and gun stores which are to be reported separately in classification 6309.

3402-74 Tool: Manufacturing, not hot forming or stamping; Die: Manufacturing - ferrous

     Applies to establishments engaged in tool manufacturing or die manufacturing, for others, from ferrous materials. Tools manufactured in this classification are usually cutting tools used in lathes, mills, rotors, and saws. Machinery includes, but is not limited to, sharpeners, grinders, lathes and mills, which are both manual or Computer Numeric Controlled (CNC). The die manufacturing included in this classification includes those made exclusively of ferrous materials including, but not limited to, jigs, fixtures, and dies for metal work in general. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in the manufacture of machine-finished tools which are to be reported separately in classification 3402-83.

3402-77 Auto, truck, semi-trailer and bus body: Manufacturing;

Travel trailer body: Manufacturing or repair

     Applies to establishments engaged in the manufacture of auto, truck, and bus bodies, and in the manufacture or repair of travel trailer bodies or cargo containers. Repairs are usually made with the use of welders or cutting torches and air or hand tools. These establishments will also repair or replace hydraulic units. Material used in the manufacture of goods in this classification is usually steel and aluminum, varying in thickness from 16 gauge to plate metal up to one inch thick. Shapes include, but are not limited to, sheet metal, tubes, solid rod or I-beams. Equipment includes, but is not limited to, shears, breaks, hydraulic presses, iron workers, drill presses, grinders, welders, hoist, cranes, and forklifts. Shops may have a finish sanding area as well as a paint area where the vehicle bodies are sprayed with primer, a body bonding material, or a finish coat of paint. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-83 Tool: Manufacturing and machine finishing

     Applies to establishments engaged in manufacturing and machine finishing tools. Tools manufactured in this classification are usually hand held instruments such as, but not limited to, wrenches, screw drivers, hammers, torque wrenches, pliers, and sockets. Machinery includes, but is not limited to, air and hand tools, polishers, grinders, inspection equipment, mills, lathes, shapers, and drill presses, some of which may be Computer Numeric Control (CNC). Establishments may have a galvanizing and/or electroplating area for the finish work which is included when performed by employees of employers subject to this classification. Other establishments in this classification send the finish work out. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; establishments engaged in the manufacture of tools from ferrous materials which are to be reported separately in classification 3402-74; and establishments engaged in tool forging which are to be reported separately in classification 5106.

3402-85 Auto or truck parts: Machining or rebuild not in vehicle

     Applies to establishments engaged in machining or rebuilding auto or truck parts such as, but not limited to, water pumps, fuel pumps, transmissions, heads, brake drums, ball joints, and rear ends, which are not in the vehicle. Work contemplated in this classification may also include manufacturing sockets, pulleys, shafts, fittings, flywheels, and/or bearings. Machinery includes, but is not limited to, mills, lathes, grinders, sanders, presses, welders, and balancing equipment. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in manufacturing or rebuilding auto, truck, or aircraft engines which are to be reported separately in classification 3402-86.

3402-86 Auto, truck or aircraft engine, N.O.C.: Manufacturing or rebuilding

     Applies to establishments engaged in manufacturing or rebuilding auto, truck, or aircraft engines not covered by another classification (N.O.C.), including manufacturing the component parts. Establishments in this classification often specialize in the type of engines they make or rebuild. The basic difference between automobile, truck, and aircraft engines is the size and weight of the parts being worked on. Engine rebuild shops use many specialized machines and air tools to tear the core down to an engine block; then rebuild the engine. After the engine is stripped down to the engine block, it is placed in a machine called a baker which heats to approximately 600 degrees and bakes away the grease. After baking, the engine block is placed in a sand blaster where the surface is cleaned with very fine steel shot. The engine block is then placed in a large pressure washer which removes the steel shot. Next, the crank and cam shafts are ground and turned on machinery similar to lathes. There is usually a separate room or area which is called the "head shop" where the heads and valves are machined on valve grinders, valve facers, and head grinders. Engine rebuild shops that do not have the equipment to grind the crank and cam shafts will contract work out to other shops, or buy new crank shafts and cam shafts. Other machinery includes, but is not limited to, boring bars and hones to polish cylinder walls, small pressure washers for oil pans and other smaller parts, solvent tanks, and hoists or forklifts for lifting the engines or engine parts. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in machining or rebuilding auto or truck parts, other than engines, which are to be reported separately in classification 3402-85.

3402-91 Bed spring or wire mattress: Manufacturing

     Applies to establishments engaged in the manufacture of bed springs or wire mattresses. The wire stock is coiled and cut to length on a coiling machine, then tempered in an oven to produce the spring. The coils are fastened to the frame either by hand or by machine. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in the manufacture of stuffed mattresses which are to be reported separately in classification 3708.

3402-93 Valve: Manufacturing

     Applies to establishments engaged in the manufacture of valves. Valves regulate the flow of air, gases, liquids, or loose material through structures by opening, closing, or obstructing passageways. They are operated manually, electrically, with compressed air, or hydraulic pressure. Valves are usually cut from aluminum, steel, or stainless steel either by a Computer Numeric Controlled machine (CNC) or water jet machine. Depending upon the complexity of the valve, they are assembled in one or several stages. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged in the manufacture of valves made in a die mold which are to be reported separately in classification 3402-74.

3402-94 Precision machined parts, N.O.C.: Manufacturing

     Applies to establishments engaged in manufacturing precision machined parts not covered by another classification (N.O.C.). Most of these establishments are "job shops." Job shops make component parts for other businesses according to customer specifications, rather than manufacturing a specific product. Many establishments in this classification manufacture precision parts for the aerospace industry. Machining usually begins with solid blocks of material such as, but not limited to, steel, aluminum, titanium, inconel, or plastic, although some hollow tube, flat bar, and angle stock may also be used. The "rough cuts" are often made on manual machines, and the finish cuts on Computer Numeric Controlled (CNC) machines. Depending on the establishment and the job specifications, a specific part may be sent to one or more additional shops to be tempered, milled, or inspected before the original establishment is through with the manufacturing process. Some parts are so sensitive that climate controlled conditions are necessary. Both manual and CNC mills and lathes are the most common types of machines used. Others include, but are not limited to, saws, drills, and grinding machines. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-95 Storage battery: Manufacturing, assembly or repair

     Applies to establishments engaged in the manufacture, assembly, or repair of storage batteries. Lead ingots, weighing 20-25 pounds, are melted and poured into a mold or casting machine. After the grids are cooled lead oxide is then pumped onto each side of a grid and cured by baking in an oven of about 300 - 400 degrees F. The plates are then assembled by placing a negative separator (zinc) between a positive separator (copper), and so forth until there are enough of these cells to form the battery. Next, they are sent to a burning machine that cures the paste and plates. After the burning process, the plates are placed into a plastic or hard rubber box-like container and cured for two or three days. The plates are welded together and the top is attached to the body of the battery case with an epoxy glue. Diluted sulfuric acid is added to the battery and then it is put on a charger. The battery is then cleaned and packed for shipping. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant; establishments engaged in the manufacture of dry cell (flashlight type) batteries which are to be reported separately in classification 3602; and establishments engaged in battery sales and installation which are to be reported separately in the applicable automotive services classification.

3402-96 Automobile or motorcycle: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of automobiles or motorcycles. Most of the manufacturing operations, such as cutting, milling, and turning, are performed with Computer Numerically Controlled (CNC) machinery. Most of the assembly operations are performed with air and hand tools. Other machinery includes but is not limited to saws, grinders, and drill presses. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant and establishments engaged only in the manufacture of auto bodies which are to be reported separately in classification 3402-77.

3402-98 Machinery, N.O.C.: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of machinery not covered by another classification (N.O.C.). For purposes of this classification, machinery means any combination of mechanical parts constructed primarily with metal. Finished products vary widely and range from hand held machines to those weighing thousands of pounds; products include, but are not limited to, grinding machines, boring machines, conveyer systems, and wood chippers. Machinery used to manufacture these items includes, but is not limited to, lathes, mills, press, breaks, shears, and welders, some of which may be Computer Numerically Controlled (CNC). This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

3402-99 Photo processing machinery: Manufacturing or assembly

     Applies to establishments engaged in the manufacture or assembly of photo processing machinery such as, but not limited to, photo processors or film enlargers. This classification includes the repair of items being manufactured or assembled when done by employees of an employer having operations subject to this classification when the repair is done as a part of and in connection with the manufacturing or assembly operation. This is a shop or plant only classification; it includes work being performed in an adjacent yard when operated by an employer having operations subject to this classification.

     This classification excludes all activities away from the shop or plant.

[Statutory Authority: RCW 51.16.035, 51.16.100, 2008 c 70, and Title 51 RCW. 08-15-132, § 296-17A-3402, filed 7/22/08, effective 10/1/08. Statutory Authority: RCW 51.16.035 and 51.16.100. 07-12-047, § 296-17A-3402, filed 5/31/07, effective 7/1/07. 07-01-014, recodified as § 296-17A-3402, filed 12/8/06, effective 12/8/06. Statutory Authority: RCW 51.16.035 and 51.16.100. 06-24-055, § 296-17-580, filed 12/1/06, effective 1/1/07; 06-12-075, § 296-17-580, filed 6/6/06, effective 1/1/07. Statutory Authority: RCW 51.16.035. 99-18-068, § 296-17-580, filed 8/31/99, effective 10/1/99; 98-18-042, § 296-17-580, filed 8/28/98, effective 10/1/98; 96-12-039, § 296-17-580, filed 5/31/96, effective 7/1/96. Statutory Authority: RCW 51.04.020(1) and 51.16.035. 93-12-093, § 296-17-580, filed 5/31/93, effective 7/1/93; 89-24-051 (Order 89-22), § 296-17-580, filed 12/1/89, effective 1/1/90. Statutory Authority: RCW 51.16.035. 88-12-050 (Order 88-06), § 296-17-580, filed 5/31/88, effective 7/1/88; 85-24-032 (Order 85-33), § 296-17-580, filed 11/27/85, effective 1/1/86; 85-06-026 (Order 85-7), § 296-17-580, filed 2/28/85, effective 4/1/85; 83-24-017 (Order 83-36), § 296-17-580, filed 11/30/83, effective 1/1/84; 82-24-047 (Order 82-38), § 296-17-580, filed 11/29/82, effective 1/1/83; 81-24-042 (Order 81-30), § 296-17-580, filed 11/30/81, effective 1/1/82. Statutory Authority: RCW 51.04.030 and 51.16.035. 79-12-086 (Order 79-18), § 296-17-580, filed 11/30/79, effective 1/1/80; Order 76-36, § 296-17-580, filed 11/30/76; Order 75-38, § 296-17-580, filed 11/24/75, effective 1/1/76; Order 73-22, § 296-17-580, filed 11/9/73, effective 1/1/74.]

3701-03 Ammonia, nitrogen and ammonium nitrate: Manufacturing

     Applies to establishments engaged in the manufacture of ammonia, nitrogen and ammonium nitrate. Ammonia is a colorless gas used as a component in fertilizer, medicines and cleaning compounds manufacturing. The manufacturing process involves combining hydrogen and nitrogen gases with a catalyst which causes a reaction between the two gases when heated in a generator. Ammonium nitrate is a crystalline compound used mainly in fertilizers, explosives and propellants. The manufacturing process involves combining ammonia and nitric acid in a reactor. Nitrogen is a colorless gas that is obtained from the air and processed by compressing air in a pressurized tank, removing impurities, and separating nitrogen and oxygen through heating.

3701-04 Nitrate recovery from X-ray and photo films

     Applies to establishments engaged in recovering nitrate or silver from X-ray and photo films. The recovery process involves placing the films in developing solutions, ionizing the solution and separating the elements.

3701-05 Dye and chemicals: Manufacturing

     Applies to establishments engaged in the manufacture of all types of dyes and in the manufacture of dyes and chemicals that are used exclusively for tinting candles. Organic and inorganic compounds such as, but not limited to, phenols, alcohols, caustics, acids, salts and gases are used in the manufacturing process. Manufacturing methods include, but are not limited to, weighing raw materials to specifications and pumping them into vats where they are heated, agitated and cooled. They are then filtered through presses, dried in ovens, ground into a powder, and then packaged. Liquid or paste forms of dye go through the same process with the exception of the drying and grinding operations.

3701-06 Chemicals, N.O.C.: Manufacturing by nitration, alkylation and oxidation processes

     Applies to establishments engaged in the manufacture of chemicals not covered by another classification (N.O.C.) using a nitration, alkylation or oxidation process. Nitration involves the combining of nitrate with an organic compound to produce nitrobenzenes used in solvents, fertilizers and acids. Alkylation involves combining alkyls with other substances to form products used in the production of paper pulp, hard soap and petroleum products. Oxidation involves the combining of oxygen with other substances to produce products such as, but not limited to, hydrogen peroxide, protective metal coatings, and pharmaceutical preparations.

     This classification excludes the manufacture of ammonia or nitrogen which is to be reported separately in classification 3701-03 and the manufacture of oxygen, hydrogen, acetylene gas, carbonic acid gas, or acids which is to be reported separately in classification 3701-10.

3701-07 Chemical mixing, blending and repackaging only: Fireworks manufacturing

     Applies to establishments engaged exclusively in mixing, blending or repackaging chemicals; it does not apply to the manufacture of ingredients for the mixing operation. The product may be mixed by hand or through a mechanical process. The equipment used by establishments covered by this classification is limited to storage tanks, mixing or blending screens and vats, filling and packaging machines and miscellaneous equipment such as fork lifts and trucks. Fireworks are assembled by hand and using hand operated tools.

     This classification excludes establishments involved in more than a mixing, blending or repackaging operation which are to be reported separately in the appropriate chemical manufacturing classification, and technicians who set up and carry out fireworks displays who are to be reported separately in classification 6207.

3701-08 Cosmetics: Manufacturing

     Applies to establishments engaged in the manufacture of cosmetics such as, but not limited to, soap, shampoo, hair conditioners, skin moisturizers, baby powder, lipstick, nail polish, bath oil, bath salts, and various personal care creams, gels or lotions. The process involves the mixing of premanufactured ingredients, using equipment such as storage tanks, mixers, heating devices, bottling/packaging/labeling equipment, and laboratory equipment for product development and quality control.

     This classification excludes the manufacturing of the ingredients used in the mixing of the cosmetics.

3701-09 Drug, medicine, or pharmaceutical preparation: Manufacturing

     Applies to establishments engaged in the manufacture of pharmaceuticals including drugs, medicines, and preparations such as, but not limited to, tablets, pills, ointments, liquids, and powders. Processes contemplated by this classification include mixing or blending of the base medicinal ingredients and additives such as, but not limited to, sugars, starches, flavorings, and waxes used for coating tablets. Compounds are then pulverized, distilled, heated and/or dried.

     This classification excludes the manufacture or harvest of the ingredients used in the manufacture of the pharmaceuticals.

3701-10 Oxygen, hydrogen, acetylene gas, carbonic acid gas: Manufacturing

     Applies to establishments engaged in the manufacture of oxygen, hydrogen, acetylene gas, carbonic acid gas, dry ice, or acid. The manufacture of oxygen and hydrogen involves the recovery of these gaseous elements from the air by compression, expansion and cooling operations until it liquefies. The liquid air then goes to a fractionator where the oxygen is separated from the hydrogen along with other gases such as neon and helium. Acetylene is a highly flammable but nontoxic gas that is manufactured by reacting calcium carbide with water in a pressure generator which combines carbon and lime to form the end product. Carbonic acid gas, also know as phenol, is a caustic poisonous gas used in manufacturing resins, plastics, and disinfectants. The manufacture of phenol involves a compression and refrigeration process.

3701-11 Alcohol: Manufacturing, distilling, N.O.C.

     Applies to establishments engaged in manufacturing or distilling nonspirituous alcohol not covered by another classification (N.O.C.). Types of alcohol include, but are not limited to, methanol (wood alcohol), ethanol (grain alcohol) or denatured alcohol (combination of methanol and ethanol). Products produced include, but are not limited to, solvents, processing materials, germicides, antiseptics, or materials intended to be used as an ingredient in other products such as varnish and shellac. The processes for the production are varied depending on the type of alcohol and end product but all use a distillation process which involves the heating of liquids and subsequent condensation of vapors to purify or separate a substance contained in the original wood or grain product.

     This classification excludes the manufacture of spirituous liquor which is to be reported separately in classification 3702 and gasohol distilling or refining which is to be reported separately in classification 3407.

3701-13 Polish, dressing, or ink: Manufacturing

     Applies to establishments engaged in the manufacture of polish, dressings, or ink. Polish and dressing products include, but are not limited to, polish or dressings for shoes, leather, furniture, automobiles or metal. The ingredients and processes for polish and dressing manufacturing vary, depending on the end product. Typical ingredients include but are not limited to oils, waxes, resins, detergents, methanol, solvents, water and coloring. The process may involve a simple mixing operation or a more involved process involving heating or cooking and molding into a cake or stick form. Typical equipment includes, but is not limited to, weighing and measuring scales, mixers, stoves, molding apparatus, automatic filling, labeling, wrapping and packaging machines. Ink manufacturing covers all types of ink including, but not limited to, newspaper, book, magazine, and writing ink. The process involves the cooking of oils and resins which produces a resin. Pigments and dryers are blended into the resin mixture and diluted to proper consistency.

     This classification excludes the manufacture of candles, crayons, and adhesives which is to be reported separately in classification 3701-25.

3701-14 Extract: Manufacturing, including distillation of essential oils

     Applies to establishments engaged in the manufacture of extract including the distillation of essential oils. Extracts are concentrated forms of an essential component of a food or a plant. Extracts include, but are not limited to, flavorings, perfume oils, sachet powders, ingredients for skin conditioners and hop extracts used in the brewing of beer. The process involves extracting flavorings or oils from various plants, herbs or fruit peelings by pressing, cooking, steaming or distillation. The extracts may be mixed or blended with other extracts for strength, consistency or color and are then bottled or canned. Typical equipment includes, but is not limited to, steam cookers, presses, distillation apparatus, filters, grinders, tanks, vats and filling, packaging and labeling machines.

     This classification excludes perfume manufacturing which is to be reported separately in classification 3701-15; mint distilling which is to be reported separately in classification 3701-17; and hop pellet manufacturing which is to be reported separately in classification 2101.

3701-15 Perfume: Manufacturing, including distillation of essential oils

     Applies to establishments engaged in the manufacture of perfumes including the distillation of essential oils. Perfumes may be used as a personal fragrance or by other manufacturers such as in the making of scented candles. The process typically involves the distillation, cooking, grinding, compounding, drying, blending, or liquidizing of ingredients. These ingredients may include, but not be limited to, extracts, oils, colors and binders.

     This classification excludes the manufacture of candles which is to be reported separately in classification 3701-25.

3701-17 Mint distilling

     Applies to establishments engaged in the distillation of mint. The process may begin with mint oil that is purchased from others or with the distillation of the mint leaves into mint oil. The mint leaves are chopped and blown into a mint steamer which lifts the moisture and oils from the mint. The resultant steam then goes through a series of condensation lines. Water is added to force the oil to the top of the liquid. The mint oil is heated for purification and to lessen the fragrance. Various mint oils may then be blended together to produce different types such as spearmint and peppermint. The product is then packaged in stainless steel or epoxy lined barrels.

     This classification excludes the raising and harvesting of mint which is to be reported separately in classification 4811.

3701-20 Salt, borax or potash producing or refining

     Applies to establishments engaged in the production of or refining of salt, borax or potash. This classification includes the manufacture of common salt used in chemical and food processing, borax which is used in the manufacture of glass, glazes, soap, and boric acid, and potash which is used in fertilizer. Salt ores received from others are dissolved in water to produce a brine of the desired concentration. It is refined into common salt by adding caustic soda and soda ash. Potash is refined by adding an amine to the brine which causes the salts to float to the surface where they are skimmed off. Borax is made by separating it from the potash by a rapid cooling process. All three of these products are then fully evaporated by heating in a partial vacuum to produce crystals or granules which are then dried.

     This classification excludes the production of raw materials used in the manufacture of these products.

3701-21 Serum, antitoxin or virus: Manufacturing

     Applies to establishments engaged in the manufacture of serums, antitoxins, or viruses. The process involves considerable microscopic laboratory work as well as working with animals. The animals are injected with bacteria and viruses, periodically bled and eventually killed. The killing of the animals is included in this classification as it is incidental and necessary to perform the operation to extract the serum from the glands and to separate the red blood cells from the blood.

     This classification excludes the manufacture of other drugs or medicines which are to be reported separately in classification 3701-09.

3701-22 Paint, varnish or lacquer: Manufacturing

     Applies to establishments engaged in the manufacture of paint, varnish, lacquer, enamel, shellac, paint removers and thinners. The paint manufacturing process involves a series of mixing and grinding operations. The pigments (solids) are then blended with oils or resins (liquids). A paint extender may also be added at this point. The paint is then pumped into filling machines where various sized containers are filled and then labeled. Lacquer, varnish, enamel, shellac and paint removers and thinners vary in the ingredients used but the process is similar to that of paint manufacturing in that it is mainly a mixing operation. Varnishes involve a cooking process which is generally not used in the manufacture of the other products included in this classification.

     This classification excludes the production of raw materials used in the manufacture of these products.

3701-23 Putty or synthetic resin: Manufacturing

     Applies to establishments engaged in the manufacture of putty or synthetic resin. Putty is a finely powdered chalk mixed with linseed oil. The main ingredients for both putty and synthetic resins are ground chalk, limestone and/or calcite. The process for both products involves grinding and mixing operations.

     This classification excludes the production of the raw materials used in the manufacture of these products.

3701-25 Candle, crayon, and paste or glue: Manufacturing

     Applies to establishments engaged in the manufacture of candles, crayons, and synthetic adhesives such as paste or glue. Raw materials used for making candles include, but are not limited to, beeswax, paraffin, stearin, wicks and colors which are received from others. The wax is heated in kettles or similar devices into which the wicks are dipped either by hand or by dipping equipment which can be either manual or automated. A fragrance may be added to the melted wax for scented candles. When the wax has attained the desired shape and size it is hung on lines to dry. The wicks are then cut and the candles are placed in molds to shape the base of the candle. Color is then added by dipping either by hand for specialized designs or by machine for solid colors. The candles are then inspected, wrapped, packaged and labeled. Crayons use the same ingredients that are used in making candles with the exception of the wicks. The type of wax used in making crayons determines the hardness. The wax is melted in a kettle or similar device and poured into molds for shaping and cooling. The crayons are then inspected, packaged and labeled. Synthetic paste or glue is made from powder or granule arabic gum or modified starch which is received from others along with preservatives and the containers and caps. The process involves mixing and cooking the ingredients in steel tanks and pumping the product to a filling area where it is packaged, labeled and capped.

     This classification excludes the manufacture of polish, dressing, or ink which is to be reported separately in classification 3701-13; the manufacture of glue from animal substances which is to be reported separately in classification 4301; and the production of raw materials used in the manufacture of these products.

3701-27 Hazardous/toxic material: Repackaging for disposal

     Applies to establishments engaged in identifying and repackaging hazardous/toxic materials for disposal. This classification is distinguished from classification 4305-20, in that classification 3701-27 applies to the identifying and repackaging for disposal of such materials as drugs, pesticides, chemicals, and toners that contain toxic or hazardous materials, while classification 4305-20 includes the processing or handling of such materials as medical or septic tank waste, drug lab or hazardous spill cleanup, and reprocessing or handling of low-level radioactive materials. For handling hazardous or toxic materials, the workers are equipped with protective clothing such as long sleeved shirts, depending on the material to which they will be exposed. They may also be equipped with steel toed boots, protective gloves, safety glasses and various types of respirator equipment. On a typical project, the first step is to visually inspect the materials to see if they appear to be the materials described on a job order. If there is a question of identity, a sample of the material is sent to a lab for analysis. The establishment may have its own lab facilities or the sample may be sent to an outside lab, or the customer may have it analyzed. Every component of the sample must be identified. Once the material has been identified, and all containers labeled, the containers are separated into appropriate groupings. Smaller containers of similar types of materials are packed into 55 gallon drums with plastic or other cushioning protective material to prevent breakage. All necessary paper work and forms required by various government agencies must be completed before the material can be transported to a disposal site.

     This classification excludes hazardous/toxic material processing or handling, including processing of medical or septic tank waste, drug lab or hazardous spill cleanup; reprocessing or handling of low-level radioactive materials which is to be reported separately in classification 4305-20; and the replacement of nontoxic toner in cartridges used in business machines which is to be reported separately in classification 4107.

[07-01-014, recodified as § 296-17A-3701, filed 12/8/06, effective 12/8/06. Statutory Authority: RCW 51.16.035. 98-18-042, § 296-17-599, filed 8/28/98, effective 10/1/98; 96-12-039, § 296-17-599, filed 5/31/96, effective 7/1/96; 85-24-032 (Order 85-33), § 296-17-599, filed 11/27/85, effective 1/1/86; 83-24-017 (Order 83-36), § 296-17-599, filed 11/30/83, effective 1/1/84; 82-24-047 (Order 82-38), § 296-17-599, filed 11/29/82, effective 1/1/83. Statutory Authority: RCW 51.04.020(1) and 51.16.035. 78-12-043 (Order 78-23), § 296-17-599, filed 11/27/78, effective 1/1/79; Order 74-40, § 296-17-599, filed 11/27/74, effective 1/1/75; Order 73-22, § 296-17-599, filed 11/9/73, effective 1/1/74.]

     The following section of the Washington Administrative Code is repealed:

WAC 296-17A-4601

Classification 4601.

© Washington State Code Reviser's Office